[PATCH v9 28/38] x86, realmode: Check for memory encryption on the APs

Tom Lendacky thomas.lendacky at amd.com
Fri Jul 7 06:43:21 PDT 2017


Add support to check if memory encryption is active in the kernel and that
it has been enabled on the AP. If memory encryption is active in the kernel
but has not been enabled on the AP, then set the memory encryption bit (bit
23) of MSR_K8_SYSCFG to enable memory encryption on that AP and allow the
AP to continue start up.

Reviewed-by: Borislav Petkov <bp at suse.de>
Signed-off-by: Tom Lendacky <thomas.lendacky at amd.com>
---
 arch/x86/include/asm/realmode.h      |   12 ++++++++++++
 arch/x86/realmode/init.c             |    4 ++++
 arch/x86/realmode/rm/trampoline_64.S |   24 ++++++++++++++++++++++++
 3 files changed, 40 insertions(+)

diff --git a/arch/x86/include/asm/realmode.h b/arch/x86/include/asm/realmode.h
index 230e190..90d9152 100644
--- a/arch/x86/include/asm/realmode.h
+++ b/arch/x86/include/asm/realmode.h
@@ -1,6 +1,15 @@
 #ifndef _ARCH_X86_REALMODE_H
 #define _ARCH_X86_REALMODE_H
 
+/*
+ * Flag bit definitions for use with the flags field of the trampoline header
+ * in the CONFIG_X86_64 variant.
+ */
+#define TH_FLAGS_SME_ACTIVE_BIT		0
+#define TH_FLAGS_SME_ACTIVE		BIT(TH_FLAGS_SME_ACTIVE_BIT)
+
+#ifndef __ASSEMBLY__
+
 #include <linux/types.h>
 #include <asm/io.h>
 
@@ -38,6 +47,7 @@ struct trampoline_header {
 	u64 start;
 	u64 efer;
 	u32 cr4;
+	u32 flags;
 #endif
 };
 
@@ -69,4 +79,6 @@ static inline size_t real_mode_size_needed(void)
 void set_real_mode_mem(phys_addr_t mem, size_t size);
 void reserve_real_mode(void);
 
+#endif /* __ASSEMBLY__ */
+
 #endif /* _ARCH_X86_REALMODE_H */
diff --git a/arch/x86/realmode/init.c b/arch/x86/realmode/init.c
index d6ddc7e..1f71980 100644
--- a/arch/x86/realmode/init.c
+++ b/arch/x86/realmode/init.c
@@ -108,6 +108,10 @@ static void __init setup_real_mode(void)
 	trampoline_cr4_features = &trampoline_header->cr4;
 	*trampoline_cr4_features = mmu_cr4_features;
 
+	trampoline_header->flags = 0;
+	if (sme_active())
+		trampoline_header->flags |= TH_FLAGS_SME_ACTIVE;
+
 	trampoline_pgd = (u64 *) __va(real_mode_header->trampoline_pgd);
 	trampoline_pgd[0] = trampoline_pgd_entry.pgd;
 	trampoline_pgd[511] = init_top_pgt[511].pgd;
diff --git a/arch/x86/realmode/rm/trampoline_64.S b/arch/x86/realmode/rm/trampoline_64.S
index dac7b20..614fd70 100644
--- a/arch/x86/realmode/rm/trampoline_64.S
+++ b/arch/x86/realmode/rm/trampoline_64.S
@@ -30,6 +30,7 @@
 #include <asm/msr.h>
 #include <asm/segment.h>
 #include <asm/processor-flags.h>
+#include <asm/realmode.h>
 #include "realmode.h"
 
 	.text
@@ -92,6 +93,28 @@ ENTRY(startup_32)
 	movl	%edx, %fs
 	movl	%edx, %gs
 
+	/*
+	 * Check for memory encryption support. This is a safety net in
+	 * case BIOS hasn't done the necessary step of setting the bit in
+	 * the MSR for this AP. If SME is active and we've gotten this far
+	 * then it is safe for us to set the MSR bit and continue. If we
+	 * don't we'll eventually crash trying to execute encrypted
+	 * instructions.
+	 */
+	bt	$TH_FLAGS_SME_ACTIVE_BIT, pa_tr_flags
+	jnc	.Ldone
+	movl	$MSR_K8_SYSCFG, %ecx
+	rdmsr
+	bts	$MSR_K8_SYSCFG_MEM_ENCRYPT_BIT, %eax
+	jc	.Ldone
+
+	/*
+	 * Memory encryption is enabled but the SME enable bit for this
+	 * CPU has has not been set.  It is safe to set it, so do so.
+	 */
+	wrmsr
+.Ldone:
+
 	movl	pa_tr_cr4, %eax
 	movl	%eax, %cr4		# Enable PAE mode
 
@@ -147,6 +170,7 @@ GLOBAL(trampoline_header)
 	tr_start:		.space	8
 	GLOBAL(tr_efer)		.space	8
 	GLOBAL(tr_cr4)		.space	4
+	GLOBAL(tr_flags)	.space	4
 END(trampoline_header)
 
 #include "trampoline_common.S"




More information about the kexec mailing list