arm64 crashkernel fails to boot on acpi-only machines due to ACPI regions being no longer mapped as NOMAP

Bhupesh Sharma bhsharma at redhat.com
Wed Dec 20 11:52:45 PST 2017


On Tue, Dec 19, 2017 at 10:31 AM, AKASHI Takahiro
<takahiro.akashi at linaro.org> wrote:
> On Mon, Dec 18, 2017 at 02:29:05PM +0530, Bhupesh SHARMA wrote:
>>
>> [snip..]
>>
>> [    0.000000] linux,usable-memory-range base e800000, size 20000000
>> [    0.000000]  - e800000 ,  20000000
>> [    0.000000] linux,usable-memory-range base 396c0000, size a0000
>> [    0.000000]  - 396c0000 ,  a0000
>> [    0.000000] linux,usable-memory-range base 39770000, size 40000
>> [    0.000000]  - 39770000 ,  40000
>> [    0.000000] linux,usable-memory-range base 398a0000, size 20000
>> [    0.000000]  - 398a0000 ,  20000
>> [    0.000000] initrd not fully accessible via the linear mapping --
>> please check your bootloader ...
>
> This is an odd message coming from:
> |void __init arm64_memblock_init(void)
> |...
> |
> |                if (WARN(base < memblock_start_of_DRAM() ||
> |                         base + size > memblock_start_of_DRAM() +
> |                                       linear_region_size,
> |                        "initrd not fully accessible via the linear mapping -- please check your bootloader ...\n")) {
>
> Can you confirm how the condition breaks here?
> I suppose
>     base: 0xfe70000
>     size: 0x13c0000
>     memblock_start_of_DRAM(): 0xe800000
> according to the information you gave me.

Indeed, the first check 'base < memblock_start_of_DRAM()' in the
following check fails:

        if (WARN(base < memblock_start_of_DRAM() ||
             base + size > memblock_start_of_DRAM() +
                       linear_region_size,

Here are the values I am seeing on this board using the kernel and
kexec-tools which have been modified to append the
'linux,usable-memory-range' with the acpi reclaim regions:

base=fe70000,
size=13c0000,
memblock_start_of_DRAM=39620000
linear_region_size=800000000000

I suspect that the holes introduced by kexec-tools inside
'arm64_load_other_segments()' in 'kexec/arch/arm64/kexec-arm64.c' (see
the code leg below):

    /* Put the other segments after the image. */

    hole_min = image_base + arm64_mem.image_size;
    if (info->kexec_flags & KEXEC_ON_CRASH)
        hole_max = crash_reserved_mem.end;
    else
        hole_max = ULONG_MAX;


should be updated to introduce appropriate handling of the acpi reclaim regions.
I am not aware of the background of this handling in the kexec-tools.
Do you think this can be at fault, Akashi?

Regards,
Bhupesh



>
>> [    0.000000] ------------[ cut here ]------------
>> [    0.000000] WARNING: CPU: 0 PID: 0 at arch/arm64/mm/init.c:597
>> arm64_memblock_init+0x210/0x484
>> [    0.000000] Modules linked in:
>> [    0.000000] CPU: 0 PID: 0 Comm: swapper Not tainted 4.14.0+ #7
>> [    0.000000] task: ffff000008d05580 task.stack: ffff000008cc0000
>> [    0.000000] PC is at arm64_memblock_init+0x210/0x484
>> [    0.000000] LR is at arm64_memblock_init+0x210/0x484
>> [    0.000000] pc : [<ffff000008b76984>] lr : [<ffff000008b76984>]
>> pstate: 600000c5
>> [    0.000000] sp : ffff000008ccfe80
>> [    0.000000] x29: ffff000008ccfe80 x28: 000000000f370018
>> [    0.000000] x27: 0000000011230000 x26: 00000000013b0000
>> [    0.000000] x25: 000000000fe80000 x24: ffff000008cf3000
>> [    0.000000] x23: ffff000008ec0000 x22: ffff000009680000
>> [    0.000000] x21: ffff000008afa000 x20: ffff000008080000
>> [    0.000000] x19: ffff000008afa000 x18: 000000000c283806
>> [    0.000000] x17: 0000000000000000 x16: ffff000008d05580
>> [    0.000000] x15: 000000002be00842 x14: 79206b6365686320
>> [    0.000000] x13: 657361656c70202d x12: 2d20676e69707061
>> [    0.000000] x11: 6d207261656e696c x10: 2065687420616976
>> [    0.000000] x9 : 00000000000000f4 x8 : ffff000008517414
>> [    0.000000] x7 : 746f6f622072756f x6 : 000000000000000d
>> [    0.000000] x5 : ffff000008c96360 x4 : 0000000000000001
>> [    0.000000] x3 : 0000000000000000 x2 : 0000000000000000
>> [    0.000000] x1 : 0000000000000000 x0 : 0000000000000056
>> [    0.000000] Call trace:
>> [    0.000000] Exception stack(0xffff000008ccfd40 to 0xffff000008ccfe80)
>> [    0.000000] fd40: 0000000000000056 0000000000000000
>> 0000000000000000 0000000000000000
>> [    0.000000] fd60: 0000000000000001 ffff000008c96360
>> 000000000000000d 746f6f622072756f
>> [    0.000000] fd80: ffff000008517414 00000000000000f4
>> 2065687420616976 6d207261656e696c
>> [    0.000000] fda0: 2d20676e69707061 657361656c70202d
>> 79206b6365686320 000000002be00842
>> [    0.000000] fdc0: ffff000008d05580 0000000000000000
>> 000000000c283806 ffff000008afa000
>> [    0.000000] fde0: ffff000008080000 ffff000008afa000
>> ffff000009680000 ffff000008ec0000
>> [    0.000000] fe00: ffff000008cf3000 000000000fe80000
>> 00000000013b0000 0000000011230000
>> [    0.000000] fe20: 000000000f370018 ffff000008ccfe80
>> ffff000008b76984 ffff000008ccfe80
>> [    0.000000] fe40: ffff000008b76984 00000000600000c5
>> ffff00000959b7a8 ffff000008ec0000
>> [    0.000000] fe60: ffffffffffffffff 0000000000000005
>> ffff000008ccfe80 ffff000008b76984
>> [    0.000000] [<ffff000008b76984>] arm64_memblock_init+0x210/0x484
>> [    0.000000] [<ffff000008b7398c>] setup_arch+0x1b8/0x5f4
>> [    0.000000] [<ffff000008b70a10>] start_kernel+0x74/0x43c
>> [    0.000000] random: get_random_bytes called from
>> print_oops_end_marker+0x50/0x6c with crng_init=0
>> [    0.000000] ---[ end trace 0000000000000000 ]---
>> [    0.000000] Reserving 4KB of memory at 0x2e7f0000 for elfcorehdr
>> [    0.000000] cma: Failed to reserve 512 MiB
>> [    0.000000] Kernel panic - not syncing: ERROR: Failed to allocate
>> 0x0000000000010000 bytes below 0x0000000000000000.
>> [    0.000000]
>> [    0.000000] CPU: 0 PID: 0 Comm: swapper Tainted: G        W
>> ------------   4.14.0+ #7
>> [    0.000000] Call trace:
>> [    0.000000] [<ffff000008088da8>] dump_backtrace+0x0/0x23c
>> [    0.000000] [<ffff000008089008>] show_stack+0x24/0x2c
>> [    0.000000] [<ffff0000087f647c>] dump_stack+0x84/0xa8
>> [    0.000000] [<ffff0000080cfd44>] panic+0x138/0x2a0
>> [    0.000000] [<ffff000008b95c88>] memblock_alloc_base+0x44/0x4c
>> [    0.000000] [<ffff000008b95cbc>] memblock_alloc+0x2c/0x38
>> [    0.000000] [<ffff000008b772dc>] early_pgtable_alloc+0x20/0x74
>> [    0.000000] [<ffff000008b7755c>] paging_init+0x28/0x544
>> [    0.000000] [<ffff000008b73990>] setup_arch+0x1bc/0x5f4
>> [    0.000000] [<ffff000008b70a10>] start_kernel+0x74/0x43c
>> [    0.000000] ---[ end Kernel panic - not syncing: ERROR: Failed to
>> allocate 0x0000000000010000 bytes below 0x0000000000000000.
>> [    0.000000]
>>
>> I guess it is because of the 1G alignment requirement between the
>> kernel image and the initrd and how we populate the holes between the
>> kernel image, segments (including dtb) and the initrd from the
>> kexec-tools.
>>
>> Akashi, any pointers on this will be helpful as well.
>>
>> Regards,
>> Bhupesh
>>
>>
>> >> >
>> >> > Regards,
>> >> > Bhupesh
>> >> >
>> >> > >> Just FYI, on x86, ACPI tables seems to be exposed to crash dump kernel
>> >> > >> via a kernel command line parameter, "memmap=".
>> >> > >>
>> >> > _______________________________________________
>> >> > kexec mailing list -- kexec at lists.fedoraproject.org
>> >> > To unsubscribe send an email to kexec-leave at lists.fedoraproject.org



More information about the kexec mailing list