[PATCH 08/14] arm64: kexec_file: create purgatory
AKASHI Takahiro
takahiro.akashi at linaro.org
Thu Aug 24 01:18:05 PDT 2017
This is a basic purgtory, or a kind of glue code between the two kernel,
for arm64. We will later add a feature of verifying a digest check against
loaded memory segments.
arch_kexec_apply_relocations_add() is responsible for re-linking any
relative symbols in purgatory. Please note that the purgatory is not
an executable, but a non-linked archive of binaries so relative symbols
contained here must be resolved at kexec load time.
Despite that arm64_kernel_start and arm64_dtb_addr are only such global
variables now, arch_kexec_apply_relocations_add() can manage more various
types of relocations.
Signed-off-by: AKASHI Takahiro <takahiro.akashi at linaro.org>
Cc: Catalin Marinas <catalin.marinas at arm.com>
Cc: Will Deacon <will.deacon at arm.com>
---
arch/arm64/Makefile | 1 +
arch/arm64/kernel/Makefile | 1 +
arch/arm64/kernel/machine_kexec_file.c | 199 +++++++++++++++++++++++++++++++++
arch/arm64/purgatory/Makefile | 24 ++++
arch/arm64/purgatory/entry.S | 28 +++++
5 files changed, 253 insertions(+)
create mode 100644 arch/arm64/kernel/machine_kexec_file.c
create mode 100644 arch/arm64/purgatory/Makefile
create mode 100644 arch/arm64/purgatory/entry.S
diff --git a/arch/arm64/Makefile b/arch/arm64/Makefile
index 9b41f1e3b1a0..429f60728c0a 100644
--- a/arch/arm64/Makefile
+++ b/arch/arm64/Makefile
@@ -105,6 +105,7 @@ core-$(CONFIG_XEN) += arch/arm64/xen/
core-$(CONFIG_CRYPTO) += arch/arm64/crypto/
libs-y := arch/arm64/lib/ $(libs-y)
core-$(CONFIG_EFI_STUB) += $(objtree)/drivers/firmware/efi/libstub/lib.a
+core-$(CONFIG_KEXEC_FILE) += arch/arm64/purgatory/
# Default target when executing plain make
boot := arch/arm64/boot
diff --git a/arch/arm64/kernel/Makefile b/arch/arm64/kernel/Makefile
index f2b4e816b6de..16e9f56b536a 100644
--- a/arch/arm64/kernel/Makefile
+++ b/arch/arm64/kernel/Makefile
@@ -50,6 +50,7 @@ arm64-obj-$(CONFIG_RANDOMIZE_BASE) += kaslr.o
arm64-obj-$(CONFIG_HIBERNATION) += hibernate.o hibernate-asm.o
arm64-obj-$(CONFIG_KEXEC) += machine_kexec.o relocate_kernel.o \
cpu-reset.o
+arm64-obj-$(CONFIG_KEXEC_FILE) += machine_kexec_file.o
arm64-obj-$(CONFIG_ARM64_RELOC_TEST) += arm64-reloc-test.o
arm64-reloc-test-y := reloc_test_core.o reloc_test_syms.o
arm64-obj-$(CONFIG_CRASH_DUMP) += crash_dump.o
diff --git a/arch/arm64/kernel/machine_kexec_file.c b/arch/arm64/kernel/machine_kexec_file.c
new file mode 100644
index 000000000000..183f7776d6dd
--- /dev/null
+++ b/arch/arm64/kernel/machine_kexec_file.c
@@ -0,0 +1,199 @@
+/*
+ * kexec_file for arm64
+ *
+ * Copyright (C) 2017 Linaro Limited
+ * Author: AKASHI Takahiro <takahiro.akashi at linaro.org>
+ *
+ * Most code is derived from arm64 port of kexec-tools
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+
+#define pr_fmt(fmt) "kexec_file: " fmt
+
+#include <linux/elf.h>
+#include <linux/errno.h>
+#include <linux/kernel.h>
+#include <linux/types.h>
+#include <asm/byteorder.h>
+
+/*
+ * Apply purgatory relocations.
+ *
+ * ehdr: Pointer to elf headers
+ * sechdrs: Pointer to section headers.
+ * relsec: section index of SHT_RELA section.
+ *
+ * Note:
+ * Currently R_AARCH64_ABS64, R_AARCH64_LD_PREL_LO19 and R_AARCH64_CALL26
+ * are the only types to be generated from purgatory code.
+ * If we add more functionalities, other types may also be used.
+ */
+int arch_kexec_apply_relocations_add(const Elf64_Ehdr *ehdr,
+ Elf64_Shdr *sechdrs, unsigned int relsec)
+{
+ Elf64_Rela *rel;
+ Elf64_Shdr *section, *symtabsec;
+ Elf64_Sym *sym;
+ const char *strtab, *name, *shstrtab;
+ unsigned long address, sec_base, value;
+ void *location;
+ u64 *loc64;
+ u32 *loc32, imm;
+ unsigned int i;
+
+ /*
+ * ->sh_offset has been modified to keep the pointer to section
+ * contents in memory
+ */
+ rel = (void *)sechdrs[relsec].sh_offset;
+
+ /* Section to which relocations apply */
+ section = &sechdrs[sechdrs[relsec].sh_info];
+
+ pr_debug("reloc: Applying relocate section %u to %u\n", relsec,
+ sechdrs[relsec].sh_info);
+
+ /* Associated symbol table */
+ symtabsec = &sechdrs[sechdrs[relsec].sh_link];
+
+ /* String table */
+ if (symtabsec->sh_link >= ehdr->e_shnum) {
+ /* Invalid strtab section number */
+ pr_err("reloc: Invalid string table section index %d\n",
+ symtabsec->sh_link);
+ return -ENOEXEC;
+ }
+
+ strtab = (char *)sechdrs[symtabsec->sh_link].sh_offset;
+
+ /* section header string table */
+ shstrtab = (char *)sechdrs[ehdr->e_shstrndx].sh_offset;
+
+ for (i = 0; i < sechdrs[relsec].sh_size / sizeof(*rel); i++) {
+
+ /*
+ * rel[i].r_offset contains byte offset from beginning
+ * of section to the storage unit affected.
+ *
+ * This is location to update (->sh_offset). This is temporary
+ * buffer where section is currently loaded. This will finally
+ * be loaded to a different address later, pointed to by
+ * ->sh_addr. kexec takes care of moving it
+ * (kexec_load_segment()).
+ */
+ location = (void *)(section->sh_offset + rel[i].r_offset);
+
+ /* Final address of the location */
+ address = section->sh_addr + rel[i].r_offset;
+
+ /*
+ * rel[i].r_info contains information about symbol table index
+ * w.r.t which relocation must be made and type of relocation
+ * to apply. ELF64_R_SYM() and ELF64_R_TYPE() macros get
+ * these respectively.
+ */
+ sym = (Elf64_Sym *)symtabsec->sh_offset +
+ ELF64_R_SYM(rel[i].r_info);
+
+ if (sym->st_name)
+ name = strtab + sym->st_name;
+ else
+ name = shstrtab + sechdrs[sym->st_shndx].sh_name;
+
+ pr_debug("Symbol: %-16s info: %02x shndx: %02x value=%llx size: %llx reloc type:%d\n",
+ name, sym->st_info, sym->st_shndx, sym->st_value,
+ sym->st_size, (int)ELF64_R_TYPE(rel[i].r_info));
+
+ if (sym->st_shndx == SHN_UNDEF) {
+ pr_err("reloc: Undefined symbol: %s\n", name);
+ return -ENOEXEC;
+ }
+
+ if (sym->st_shndx == SHN_COMMON) {
+ pr_err("reloc: symbol '%s' in common section\n", name);
+ return -ENOEXEC;
+ }
+
+ if (sym->st_shndx == SHN_ABS) {
+ sec_base = 0;
+ } else if (sym->st_shndx < ehdr->e_shnum) {
+ sec_base = sechdrs[sym->st_shndx].sh_addr;
+ } else {
+ pr_err("reloc: Invalid section %d for symbol %s\n",
+ sym->st_shndx, name);
+ return -ENOEXEC;
+ }
+
+ value = sym->st_value;
+ value += sec_base;
+ value += rel[i].r_addend;
+
+ switch (ELF64_R_TYPE(rel[i].r_info)) {
+ case R_AARCH64_ABS64:
+ loc64 = location;
+ *loc64 = cpu_to_elf64(ehdr,
+ elf64_to_cpu(ehdr, *loc64) + value);
+ break;
+ case R_AARCH64_PREL32:
+ loc32 = location;
+ *loc32 = cpu_to_elf32(ehdr,
+ elf32_to_cpu(ehdr, *loc32) + value
+ - address);
+ break;
+ case R_AARCH64_LD_PREL_LO19:
+ loc32 = location;
+ *loc32 = cpu_to_le32(le32_to_cpu(*loc32)
+ + (((value - address) << 3) & 0xffffe0));
+ break;
+ case R_AARCH64_ADR_PREL_LO21:
+ if (value & 3) {
+ pr_err("reloc: Unaligned value: %lx\n", value);
+ return -ENOEXEC;
+ }
+ loc32 = location;
+ *loc32 = cpu_to_le32(le32_to_cpu(*loc32)
+ + (((value - address) << 3) & 0xffffe0));
+ break;
+ case R_AARCH64_ADR_PREL_PG_HI21:
+ imm = ((value & ~0xfff) - (address & ~0xfff)) >> 12;
+ loc32 = location;
+ *loc32 = cpu_to_le32(le32_to_cpu(*loc32)
+ + ((imm & 3) << 29)
+ + ((imm & 0x1ffffc) << (5 - 2)));
+ break;
+ case R_AARCH64_ADD_ABS_LO12_NC:
+ loc32 = location;
+ *loc32 = cpu_to_le32(le32_to_cpu(*loc32)
+ + ((value & 0xfff) << 10));
+ break;
+ case R_AARCH64_JUMP26:
+ loc32 = location;
+ *loc32 = cpu_to_le32(le32_to_cpu(*loc32)
+ + (((value - address) >> 2) & 0x3ffffff));
+ break;
+ case R_AARCH64_CALL26:
+ loc32 = location;
+ *loc32 = cpu_to_le32(le32_to_cpu(*loc32)
+ + (((value - address) >> 2) & 0x3ffffff));
+ break;
+ case R_AARCH64_LDST64_ABS_LO12_NC:
+ if (value & 7) {
+ pr_err("reloc: Unaligned value: %lx\n", value);
+ return -ENOEXEC;
+ }
+ loc32 = location;
+ *loc32 = cpu_to_le32(le32_to_cpu(*loc32)
+ + ((value & 0xff8) << (10 - 3)));
+ break;
+ default:
+ pr_err("reloc: Unknown relocation type: %llu\n",
+ ELF64_R_TYPE(rel[i].r_info));
+ return -ENOEXEC;
+ }
+ }
+
+ return 0;
+}
diff --git a/arch/arm64/purgatory/Makefile b/arch/arm64/purgatory/Makefile
new file mode 100644
index 000000000000..c2127a2cbd51
--- /dev/null
+++ b/arch/arm64/purgatory/Makefile
@@ -0,0 +1,24 @@
+OBJECT_FILES_NON_STANDARD := y
+
+purgatory-y := entry.o
+
+targets += $(purgatory-y)
+PURGATORY_OBJS = $(addprefix $(obj)/,$(purgatory-y))
+
+LDFLAGS_purgatory.ro := -e purgatory_start -r --no-undefined \
+ -nostdlib -z nodefaultlib
+targets += purgatory.ro
+
+$(obj)/purgatory.ro: $(PURGATORY_OBJS) FORCE
+ $(call if_changed,ld)
+
+targets += kexec_purgatory.c
+
+CMD_BIN2C = $(objtree)/scripts/basic/bin2c
+quiet_cmd_bin2c = BIN2C $@
+ cmd_bin2c = $(CMD_BIN2C) kexec_purgatory < $< > $@
+
+$(obj)/kexec_purgatory.c: $(obj)/purgatory.ro FORCE
+ $(call if_changed,bin2c)
+
+obj-${CONFIG_KEXEC_FILE} += kexec_purgatory.o
diff --git a/arch/arm64/purgatory/entry.S b/arch/arm64/purgatory/entry.S
new file mode 100644
index 000000000000..bc4e6b3bf8a1
--- /dev/null
+++ b/arch/arm64/purgatory/entry.S
@@ -0,0 +1,28 @@
+/*
+ * kexec core purgatory
+ */
+#include <linux/linkage.h>
+
+.text
+
+ENTRY(purgatory_start)
+ /* Start new image. */
+ ldr x17, arm64_kernel_entry
+ ldr x0, arm64_dtb_addr
+ mov x1, xzr
+ mov x2, xzr
+ mov x3, xzr
+ br x17
+END(purgatory_start)
+
+.data
+
+.align 3
+
+ENTRY(arm64_kernel_entry)
+ .quad 0
+END(arm64_kernel_entry)
+
+ENTRY(arm64_dtb_addr)
+ .quad 0
+END(arm64_dtb_addr)
--
2.14.1
More information about the kexec
mailing list