[PATCH v10 04/10] kexec_file: Add support for purgatory built as PIE.
Thiago Jung Bauermann
bauerman at linux.vnet.ibm.com
Mon Nov 21 15:49:23 PST 2016
Hello Dave,
Thanks for your review.
Am Sonntag, 20. November 2016, 10:45:46 BRST schrieb Dave Young:
> On 11/10/16 at 01:27am, Thiago Jung Bauermann wrote:
> > powerpc's purgatory.ro has 12 relocation types when built as
> > a relocatable object. To implement support for them requires
> > arch_kexec_apply_relocations_add to duplicate a lot of code with
> > module_64.c:apply_relocate_add.
> >
> > When built as a Position Independent Executable there are only 4
> > relocation types in purgatory.ro, so it becomes practical for the powerpc
> > implementation of kexec_file to have its own relocation implementation.
> >
> > Also, the purgatory is an executable and not an intermediary output from
> > the compiler so it makes sense conceptually that it is easier to build
> > it as a PIE than as a partially linked object.
> >
> > Apart from the greatly reduced number of relocations, there are two
> > differences between a relocatable object and a PIE:
> >
> > 1. __kexec_load_purgatory needs to use the program headers rather than the
> >
> > section headers to figure out how to load the binary.
> >
> > 2. Symbol values are absolute addresses instead of relative to the
> >
> > start of the section.
> >
> > This patch adds the support needed in generic code for the differences
> > above and allows powerpc to load and relocate a position independent
> > purgatory.
>
> [snip]
>
> The kexec-tools machine_apply_elf_rel is pretty simple for ppc64, it is
> not that complex. So could you look into simplify your kexec_file
> implementation?
I can try, but there is one fundamental issue here: powerpc position-dependent
code relies more on relocations than x86 position-dependent code does, so
there's a limit to how simple it can be made without switching to position-
independent code. And it will always be more involved than it is on x86.
BTW, building x86's purgatory as PIE results in it not having any relocation
at all, so it's an advantage even in that architecture. Unfortunately, the
machine locks up during reboot and I didn't have time to try to figure out
what's going on.
> kernel/kexec_file.c kexec_apply_relocations only do limited things
> and some of the logic is in arch/x86, so move general code out of arch
> code, then I guess the arch code will be simpler
I agree that is a good idea. Is the patch below what you had in mind?
> and then we probably do not need this PIE stuff anymore.
If you are ok with the patch below I can post a new version of the series
based on it and we can see if Michael Ellerman thinks it is enough.
> BTW, __kexec_really_load_purgatory looks worse than
> ___kexec_load_purgatory ;)
Really? I find the special handling of bss makes the section-based loader a
bit more confusing.
--
Thiago Jung Bauermann
IBM Linux Technology Center
Subject: [PATCH] kexec_file: Move generic relocation code from arch/x86 to
kernel/kexec_file.c
The check for undefined symbols stays in arch-specific code because
powerpc needs to allow TOC symbols to be processed even though they're
undefined.
There is no functional change.
Suggested-by: Dave Young <dyoung at redhat.com>
Signed-off-by: Thiago Jung Bauermann <bauerman at linux.vnet.ibm.com>
---
arch/x86/kernel/machine_kexec_64.c | 160 +++++++------------------------------
include/linux/kexec.h | 9 ++-
kernel/kexec_file.c | 120 +++++++++++++++++++++++++++-
3 files changed, 154 insertions(+), 135 deletions(-)
diff --git a/arch/x86/kernel/machine_kexec_64.c b/arch/x86/kernel/machine_kexec_64.c
index 8c1f218926d7..f4860c408ece 100644
--- a/arch/x86/kernel/machine_kexec_64.c
+++ b/arch/x86/kernel/machine_kexec_64.c
@@ -401,143 +401,45 @@ int arch_kexec_kernel_verify_sig(struct kimage *image, void *kernel,
}
#endif
-/*
- * Apply purgatory relocations.
- *
- * ehdr: Pointer to elf headers
- * sechdrs: Pointer to section headers.
- * relsec: section index of SHT_RELA section.
- *
- * TODO: Some of the code belongs to generic code. Move that in kexec.c.
- */
-int arch_kexec_apply_relocations_add(const Elf64_Ehdr *ehdr,
- Elf64_Shdr *sechdrs, unsigned int relsec)
+int arch_kexec_apply_relocation_add(const Elf_Ehdr *ehdr, Elf_Shdr *sechdrs,
+ unsigned int reltype, Elf_Sym *sym,
+ const char *name, unsigned long *location,
+ unsigned long address, unsigned long value)
{
- unsigned int i;
- Elf64_Rela *rel;
- Elf64_Sym *sym;
- void *location;
- Elf64_Shdr *section, *symtabsec;
- unsigned long address, sec_base, value;
- const char *strtab, *name, *shstrtab;
-
- /*
- * ->sh_offset has been modified to keep the pointer to section
- * contents in memory
- */
- rel = (void *)sechdrs[relsec].sh_offset;
-
- /* Section to which relocations apply */
- section = &sechdrs[sechdrs[relsec].sh_info];
-
- pr_debug("Applying relocate section %u to %u\n", relsec,
- sechdrs[relsec].sh_info);
-
- /* Associated symbol table */
- symtabsec = &sechdrs[sechdrs[relsec].sh_link];
-
- /* String table */
- if (symtabsec->sh_link >= ehdr->e_shnum) {
- /* Invalid strtab section number */
- pr_err("Invalid string table section index %d\n",
- symtabsec->sh_link);
+ if (sym->st_shndx == SHN_UNDEF) {
+ pr_err("Undefined symbol: %s\n", name);
return -ENOEXEC;
}
- strtab = (char *)sechdrs[symtabsec->sh_link].sh_offset;
-
- /* section header string table */
- shstrtab = (char *)sechdrs[ehdr->e_shstrndx].sh_offset;
-
- for (i = 0; i < sechdrs[relsec].sh_size / sizeof(*rel); i++) {
-
- /*
- * rel[i].r_offset contains byte offset from beginning
- * of section to the storage unit affected.
- *
- * This is location to update (->sh_offset). This is temporary
- * buffer where section is currently loaded. This will finally
- * be loaded to a different address later, pointed to by
- * ->sh_addr. kexec takes care of moving it
- * (kexec_load_segment()).
- */
- location = (void *)(section->sh_offset + rel[i].r_offset);
-
- /* Final address of the location */
- address = section->sh_addr + rel[i].r_offset;
-
- /*
- * rel[i].r_info contains information about symbol table index
- * w.r.t which relocation must be made and type of relocation
- * to apply. ELF64_R_SYM() and ELF64_R_TYPE() macros get
- * these respectively.
- */
- sym = (Elf64_Sym *)symtabsec->sh_offset +
- ELF64_R_SYM(rel[i].r_info);
-
- if (sym->st_name)
- name = strtab + sym->st_name;
- else
- name = shstrtab + sechdrs[sym->st_shndx].sh_name;
-
- pr_debug("Symbol: %s info: %02x shndx: %02x value=%llx size: %llx\n",
- name, sym->st_info, sym->st_shndx, sym->st_value,
- sym->st_size);
-
- if (sym->st_shndx == SHN_UNDEF) {
- pr_err("Undefined symbol: %s\n", name);
- return -ENOEXEC;
- }
-
- if (sym->st_shndx == SHN_COMMON) {
- pr_err("symbol '%s' in common section\n", name);
- return -ENOEXEC;
- }
-
- if (sym->st_shndx == SHN_ABS)
- sec_base = 0;
- else if (sym->st_shndx >= ehdr->e_shnum) {
- pr_err("Invalid section %d for symbol %s\n",
- sym->st_shndx, name);
- return -ENOEXEC;
- } else
- sec_base = sechdrs[sym->st_shndx].sh_addr;
-
- value = sym->st_value;
- value += sec_base;
- value += rel[i].r_addend;
-
- switch (ELF64_R_TYPE(rel[i].r_info)) {
- case R_X86_64_NONE:
- break;
- case R_X86_64_64:
- *(u64 *)location = value;
- break;
- case R_X86_64_32:
- *(u32 *)location = value;
- if (value != *(u32 *)location)
- goto overflow;
- break;
- case R_X86_64_32S:
- *(s32 *)location = value;
- if ((s64)value != *(s32 *)location)
- goto overflow;
- break;
- case R_X86_64_PC32:
- value -= (u64)address;
- *(u32 *)location = value;
- break;
- default:
- pr_err("Unknown rela relocation: %llu\n",
- ELF64_R_TYPE(rel[i].r_info));
- return -ENOEXEC;
- }
+ switch (reltype) {
+ case R_X86_64_NONE:
+ break;
+ case R_X86_64_64:
+ *(u64 *)location = value;
+ break;
+ case R_X86_64_32:
+ *(u32 *)location = value;
+ if (value != *(u32 *)location)
+ goto overflow;
+ break;
+ case R_X86_64_32S:
+ *(s32 *)location = value;
+ if ((s64)value != *(s32 *)location)
+ goto overflow;
+ break;
+ case R_X86_64_PC32:
+ value -= (u64)address;
+ *(u32 *)location = value;
+ break;
+ default:
+ pr_err("Unknown rela relocation: %u\n", reltype);
+ return -ENOEXEC;
}
+
return 0;
overflow:
- pr_err("Overflow in relocation type %d value 0x%lx\n",
- (int)ELF64_R_TYPE(rel[i].r_info), value);
+ pr_err("Overflow in relocation type %u value 0x%lx\n", reltype, value);
return -ENOEXEC;
}
#endif /* CONFIG_KEXEC_FILE */
diff --git a/include/linux/kexec.h b/include/linux/kexec.h
index 406c33dcae13..e171a083540d 100644
--- a/include/linux/kexec.h
+++ b/include/linux/kexec.h
@@ -320,8 +320,13 @@ void * __weak arch_kexec_kernel_image_load(struct kimage *image);
int __weak arch_kimage_file_post_load_cleanup(struct kimage *image);
int __weak arch_kexec_kernel_verify_sig(struct kimage *image, void *buf,
unsigned long buf_len);
-int __weak arch_kexec_apply_relocations_add(const Elf_Ehdr *ehdr,
- Elf_Shdr *sechdrs, unsigned int relsec);
+int __weak arch_kexec_apply_relocation_add(const Elf_Ehdr *ehdr,
+ Elf_Shdr *sechdrs,
+ unsigned int reltype, Elf_Sym *sym,
+ const char *name,
+ unsigned long *location,
+ unsigned long address,
+ unsigned long value);
int __weak arch_kexec_apply_relocations(const Elf_Ehdr *ehdr, Elf_Shdr *sechdrs,
unsigned int relsec);
void arch_kexec_protect_crashkres(void);
diff --git a/kernel/kexec_file.c b/kernel/kexec_file.c
index 037c321c5618..1517f977cc25 100644
--- a/kernel/kexec_file.c
+++ b/kernel/kexec_file.c
@@ -61,8 +61,10 @@ int __weak arch_kexec_kernel_verify_sig(struct kimage *image, void *buf,
/* Apply relocations of type RELA */
int __weak
-arch_kexec_apply_relocations_add(const Elf_Ehdr *ehdr, Elf_Shdr *sechdrs,
- unsigned int relsec)
+arch_kexec_apply_relocation_add(const Elf_Ehdr *ehdr, Elf_Shdr *sechdrs,
+ unsigned int reltype, Elf_Sym *sym,
+ const char *name, unsigned long *location,
+ unsigned long address, unsigned long value)
{
pr_err("RELA relocation unsupported.\n");
return -ENOEXEC;
@@ -793,6 +795,117 @@ static int __kexec_load_purgatory(struct kimage *image, unsigned long min,
return ret;
}
+/**
+ * kexec_apply_relocations_add - apply purgatory relocations
+ * @ehdr: Pointer to elf headers
+ * @sechdrs: Pointer to section headers.
+ * @relsec: Section index of SHT_RELA section.
+ */
+static int kexec_apply_relocations_add(const Elf64_Ehdr *ehdr,
+ Elf64_Shdr *sechdrs, unsigned int relsec)
+{
+ int ret;
+ unsigned int i;
+ Elf64_Rela *rel;
+ Elf64_Sym *sym;
+ void *location;
+ Elf64_Shdr *section, *symtabsec;
+ unsigned long address, sec_base, value;
+ const char *strtab, *name, *shstrtab;
+
+ /*
+ * ->sh_offset has been modified to keep the pointer to section
+ * contents in memory
+ */
+ rel = (void *)sechdrs[relsec].sh_offset;
+
+ /* Section to which relocations apply */
+ section = &sechdrs[sechdrs[relsec].sh_info];
+
+ pr_debug("Applying relocate section %u to %u\n", relsec,
+ sechdrs[relsec].sh_info);
+
+ /* Associated symbol table */
+ symtabsec = &sechdrs[sechdrs[relsec].sh_link];
+
+ /* String table */
+ if (symtabsec->sh_link >= ehdr->e_shnum) {
+ /* Invalid strtab section number */
+ pr_err("Invalid string table section index %d\n",
+ symtabsec->sh_link);
+ return -ENOEXEC;
+ }
+
+ /* String table for the associated symbol table. */
+ strtab = (char *)sechdrs[symtabsec->sh_link].sh_offset;
+
+ /* section header string table */
+ shstrtab = (char *)sechdrs[ehdr->e_shstrndx].sh_offset;
+
+ for (i = 0; i < sechdrs[relsec].sh_size / sizeof(*rel); i++) {
+
+ /*
+ * rel[i].r_offset contains byte offset from beginning
+ * of section to the storage unit affected.
+ *
+ * This is location to update (->sh_offset). This is temporary
+ * buffer where section is currently loaded. This will finally
+ * be loaded to a different address later, pointed to by
+ * ->sh_addr. kexec takes care of moving it
+ * (kexec_load_segment()).
+ */
+ location = (void *)(section->sh_offset + rel[i].r_offset);
+
+ /* Final address of the location */
+ address = section->sh_addr + rel[i].r_offset;
+
+ /*
+ * rel[i].r_info contains information about symbol table index
+ * w.r.t which relocation must be made and type of relocation
+ * to apply. ELF64_R_SYM() and ELF64_R_TYPE() macros get
+ * these respectively.
+ */
+ sym = (Elf64_Sym *)symtabsec->sh_offset +
+ ELF64_R_SYM(rel[i].r_info);
+
+ if (sym->st_name)
+ name = strtab + sym->st_name;
+ else
+ name = shstrtab + sechdrs[sym->st_shndx].sh_name;
+
+ pr_debug("Symbol: %s info: %02x shndx: %02x value=%llx size: %llx\n",
+ name, sym->st_info, sym->st_shndx, sym->st_value,
+ sym->st_size);
+
+ if (sym->st_shndx == SHN_COMMON) {
+ pr_err("symbol '%s' in common section\n", name);
+ return -ENOEXEC;
+ }
+
+ if (sym->st_shndx == SHN_ABS)
+ sec_base = 0;
+ else if (sym->st_shndx >= ehdr->e_shnum) {
+ pr_err("Invalid section %d for symbol %s\n",
+ sym->st_shndx, name);
+ return -ENOEXEC;
+ } else
+ sec_base = sechdrs[sym->st_shndx].sh_addr;
+
+ value = sym->st_value;
+ value += sec_base;
+ value += rel[i].r_addend;
+
+ ret = arch_kexec_apply_relocation_add(ehdr, sechdrs,
+ ELF64_R_TYPE(rel[i].r_info),
+ sym, name, location,
+ address, value);
+ if (ret)
+ return ret;
+ }
+
+ return 0;
+}
+
static int kexec_apply_relocations(struct kimage *image)
{
int i, ret;
@@ -836,8 +949,7 @@ static int kexec_apply_relocations(struct kimage *image)
* relocations of type SHT_RELA/SHT_REL.
*/
if (sechdrs[i].sh_type == SHT_RELA)
- ret = arch_kexec_apply_relocations_add(pi->ehdr,
- sechdrs, i);
+ ret = kexec_apply_relocations_add(pi->ehdr, sechdrs, i);
else if (sechdrs[i].sh_type == SHT_REL)
ret = arch_kexec_apply_relocations(pi->ehdr,
sechdrs, i);
--
2.7.4
More information about the kexec
mailing list