[PATCH 1/1] pci: reset all pci endpoints to stop on going dma
Gavin Shan
gwshan at linux.vnet.ibm.com
Sun Oct 19 16:20:08 PDT 2014
On Fri, Oct 17, 2014 at 02:44:43AM -0700, Eric W. Biederman wrote:
>"Li, Zhen-Hua" <zhen-hual at hp.com> writes:
>
>> This is an update of the patch
>> https://lkml.org/lkml/2014/10/10/37
>>
>> This patch is doing the reset works before the kdump kernel boots.
>
>If I have said it once I have said it a thousand times.
>
>Nacked-by: "Eric W. Biederman" <ebiederm at xmission.com>
>Nacked-by: "Eric W. Biederman" <ebiederm at xmission.com>
>Nacked-by: "Eric W. Biederman" <ebiederm at xmission.com>
>
>It is absolutely inappropriate to do this in the kernel that has
>crashed.
>
>Either reserve a chunk of the iommu for use by the crash dump kernel,
>or figure out how to do this during boot up.
>
>But this is absolutely and totally inappropriate to do in crash_kexec.
>The failure modes are all wrong. It will impact the reliability of our
>crash dumps.
>
>If an the code for a linux architecture is not structured in such a way
>as to make it easy or straight forward to do this my sympathies you are
>going to have do fix that linux port to be able to do things during
>boot.
>
>But things called from crash_kexec should be absolute necessities and I
>do not see this as coming anywhere close to being something that is
>impossible to do in the target kernel.
>
Zhenhua, Intrestingly, PPC has mechanism to reset the root port for kdump case
in order to drop pending DMA traffic. Maybe you can implement similar thing.
However, this kind of reset would be platform/board specific and needs support
from underly firmware. More details could be found from arch/powerpc/
platforms/powernv/pci-ioda.c
if (is_kdump_kernel()) {
pr_info(" Issue PHB reset ...\n");
ioda_eeh_phb_reset(hose, EEH_RESET_FUNDAMENTAL);
ioda_eeh_phb_reset(hose, OPAL_DEASSERT_RESET);
}
Please check if it's the thing you're looking for. I didn't understand your
requirements 100%
Thanks,
Gavin
>Eric
>
>
>> On a Linux system with iommu supported and many PCI devices on it,
>> when kernel crashed and the kdump kernel boots with intel_iommu=on,
>> there may be some unexpected DMA requests on this adapter, which will
>> cause DMA Remapping faults like:
>> dmar: DRHD: handling fault status reg 102
>> dmar: DMAR:[DMA Read] Request device [41:00.0] fault addr fff81000
>> DMAR:[fault reason 01] Present bit in root entry is clear
>>
>> This bug may happen on *any* PCI device.
>> Analysis for this bug:
>>
>> The present bit is set in this function:
>>
>> static struct context_entry * device_to_context_entry(
>> struct intel_iommu *iommu, u8 bus, u8 devfn)
>> {
>> ......
>> set_root_present(root);
>> ......
>> }
>>
>> Calling tree:
>> device driver
>> intel_alloc_coherent
>> __intel_map_single
>> domain_context_mapping
>> domain_context_mapping_one
>> device_to_context_entry
>>
>> This means, the present bit in root entry will not be set until the device
>> driver is loaded.
>>
>> But in the kdump kernel, hardware devices are not aware that control has
>> transferred to the second kernel, and those drivers must initialize again.
>> Consequently there may be unexpected DMA requests from devices activity
>> initiated in the first kernel leading to the DMA Remapping errors in the
>> second kernel.
>>
>> To fix this DMAR fault, we need to reset the bus that this device on. Reset
>> the device itself does not work.
>>
>> A patch for this bug that has been sent before:
>> https://lkml.org/lkml/2014/9/30/55
>> As in discussion, this bug may happen on *any* device, so we need to reset
>> all pci devices.
>>
>> There was an original version(Takao Indoh) that resets the pcie devices:
>> https://lkml.org/lkml/2013/5/14/9
>>
>> According to the previous discussion, On sparc, the IOMMU is initialized
>> before PCI devices are enumerated, this patch does the resetting works before
>> the kdump kernel boots, so it can also fix the problems on sparc.
>>
>> Update of this new version, comparing with Takao Indoh's version:
>> Add support for legacy PCI devices.
>> Use pci_try_reset_bus instead of do_downstream_device_reset.
>> Reset all PCI/PCIe deviecs in the first kernel, before kdump kernel boots.
>>
>> Randy Wright corrects some misunderstanding in this description.
>>
>> Signed-off-by: Li, Zhen-Hua <zhen-hual at hp.com>
>> Signed-off-by: Takao Indoh <indou.takao at jp.fujitsu.com>
>> Signed-off-by: Randy Wright <rwright at hp.com>
>> ---
>> drivers/pci/pci.c | 82 +++++++++++++++++++++++++++++++++++++++++++++++++++++
>> include/linux/pci.h | 6 ++++
>> kernel/kexec.c | 2 ++
>> 3 files changed, 90 insertions(+)
>>
>> diff --git a/drivers/pci/pci.c b/drivers/pci/pci.c
>> index 625a4ac..aa9192a 100644
>> --- a/drivers/pci/pci.c
>> +++ b/drivers/pci/pci.c
>> @@ -23,6 +23,7 @@
>> #include <linux/device.h>
>> #include <linux/pm_runtime.h>
>> #include <linux/pci_hotplug.h>
>> +#include <linux/crash_dump.h>
>> #include <asm-generic/pci-bridge.h>
>> #include <asm/setup.h>
>> #include "pci.h"
>> @@ -4466,6 +4467,87 @@ void __weak pci_fixup_cardbus(struct pci_bus *bus)
>> }
>> EXPORT_SYMBOL(pci_fixup_cardbus);
>>
>> +/*
>> + * Return true if dev is PCI root port or downstream port whose child is PCI
>> + * endpoint except VGA device.
>> + */
>> +static int __pci_dev_need_reset(struct pci_dev *dev)
>> +{
>> + struct pci_bus *subordinate;
>> + struct pci_dev *child;
>> +
>> + if (dev->hdr_type != PCI_HEADER_TYPE_BRIDGE)
>> + return 0;
>> +
>> + if (pci_is_pcie(dev)) {
>> + if ((pci_pcie_type(dev) != PCI_EXP_TYPE_ROOT_PORT) &&
>> + (pci_pcie_type(dev) != PCI_EXP_TYPE_DOWNSTREAM))
>> + return 0;
>> + }
>> +
>> + subordinate = dev->subordinate;
>> + list_for_each_entry(child, &subordinate->devices, bus_list) {
>> + /* Don't reset switch, bridge, VGA device */
>> + if ((child->hdr_type == PCI_HEADER_TYPE_BRIDGE) ||
>> + ((child->class >> 16) == PCI_BASE_CLASS_BRIDGE) ||
>> + ((child->class >> 16) == PCI_BASE_CLASS_DISPLAY))
>> + return 0;
>> +
>> + if (pci_is_pcie(child)) {
>> + if ((pci_pcie_type(child) == PCI_EXP_TYPE_UPSTREAM) ||
>> + (pci_pcie_type(child) == PCI_EXP_TYPE_PCI_BRIDGE))
>> + return 0;
>> + }
>> + }
>> +
>> + return 1;
>> +}
>> +
>> +struct pci_dev_reset_entry {
>> + struct list_head list;
>> + struct pci_dev *dev;
>> +};
>> +int pci_reset_endpoints(void)
>> +{
>> + struct pci_dev *dev = NULL;
>> + struct pci_dev_reset_entry *pdev_entry, *tmp;
>> + struct pci_bus *subordinate = NULL;
>> + int has_it;
>> +
>> + LIST_HEAD(pdev_list);
>> +
>> +
>> + for_each_pci_dev(dev) {
>> + subordinate = dev->subordinate;
>> + if (!subordinate || list_empty(&subordinate->devices))
>> + continue;
>> +
>> + has_it = 0;
>> + list_for_each_entry(pdev_entry, &pdev_list, list) {
>> + if (dev == pdev_entry->dev) {
>> + has_it = 1;
>> + break;
>> + }
>> + }
>> + if (has_it)
>> + continue;
>> +
>> + if (__pci_dev_need_reset(dev)) {
>> + pdev_entry = kmalloc(sizeof(*pdev_entry), GFP_KERNEL);
>> + pdev_entry->dev = dev;
>> + list_add(&pdev_entry->list, &pdev_list);
>> + }
>> + }
>> +
>> + list_for_each_entry_safe(pdev_entry, tmp, &pdev_list, list) {
>> + pci_try_reset_bus(pdev_entry->dev->subordinate);
>> + kfree(pdev_entry);
>> + }
>> +
>> + return 0;
>> +}
>> +EXPORT_SYMBOL_GPL(pci_reset_endpoints);
>> +
>> static int __init pci_setup(char *str)
>> {
>> while (str) {
>> diff --git a/include/linux/pci.h b/include/linux/pci.h
>> index 5be8db4..1cf7207 100644
>> --- a/include/linux/pci.h
>> +++ b/include/linux/pci.h
>> @@ -1869,4 +1869,10 @@ static inline bool pci_is_dev_assigned(struct pci_dev *pdev)
>> {
>> return (pdev->dev_flags & PCI_DEV_FLAGS_ASSIGNED) == PCI_DEV_FLAGS_ASSIGNED;
>> }
>> +
>> +/*
>> + * Reset all pci devices by resetting the buses.
>> + */
>> +int pci_reset_endpoints(void);
>> +
>> #endif /* LINUX_PCI_H */
>> diff --git a/kernel/kexec.c b/kernel/kexec.c
>> index 2abf9f6..986e8f7 100644
>> --- a/kernel/kexec.c
>> +++ b/kernel/kexec.c
>> @@ -36,6 +36,7 @@
>> #include <linux/syscore_ops.h>
>> #include <linux/compiler.h>
>> #include <linux/hugetlb.h>
>> +#include <linux/pci.h>
>>
>> #include <asm/page.h>
>> #include <asm/uaccess.h>
>> @@ -1474,6 +1475,7 @@ void crash_kexec(struct pt_regs *regs)
>> if (kexec_crash_image) {
>> struct pt_regs fixed_regs;
>>
>> + pci_reset_endpoints();
>> crash_setup_regs(&fixed_regs, regs);
>> crash_save_vmcoreinfo();
>> machine_crash_shutdown(&fixed_regs);
>--
>To unsubscribe from this list: send the line "unsubscribe linux-pci" in
>the body of a message to majordomo at vger.kernel.org
>More majordomo info at http://vger.kernel.org/majordomo-info.html
>
More information about the kexec
mailing list