[PATCH] acpi memory hotplug, add parameter to disable memory hotplug [v5]
Rafael J. Wysocki
rjw at rjwysocki.net
Thu Jan 16 20:26:12 EST 2014
On Thursday, January 16, 2014 10:35:51 AM Prarit Bhargava wrote:
> When booting a kdump kernel on a system that has specific memory hotplug
> regions the boot will fail with warnings like:
The timestamps are still present, sigh.
OK, please see
http://git.kernel.org/cgit/linux/kernel/git/rafael/linux-pm.git/commit/?h=bleeding-edge&id=00159a2013269bc0a617de885e4b921349192bd0
and tell me if it looks good to you.
Thanks!
> [ 2.939467] swapper/0: page allocation failure: order:9, mode:0x84d0
> [ 2.946564] CPU: 0 PID: 1 Comm: swapper/0 Not tainted
> 3.10.0-65.el7.x86_64 #1
> [ 2.954532] Hardware name: QCI QSSC-S4R/QSSC-S4R, BIOS
> QSSC-S4R.QCI.01.00.S013.032920111005 03/29/2011
> [ 2.964926] 0000000000000000 ffff8800341bd8c8 ffffffff815bcc67
> ffff8800341bd950
> [ 2.973224] ffffffff8113b1a0 ffff880036339b00 0000000000000009
> 00000000000084d0
> [ 2.981523] ffff8800341bd950 ffffffff815b87ee 0000000000000000
> 0000000000000200
> [ 2.989821] Call Trace:
> [ 2.992560] [<ffffffff815bcc67>] dump_stack+0x19/0x1b
> [ 2.998300] [<ffffffff8113b1a0>] warn_alloc_failed+0xf0/0x160
> [ 3.004817] [<ffffffff815b87ee>] ?
> __alloc_pages_direct_compact+0xac/0x196
> [ 3.012594] [<ffffffff8113f14f>] __alloc_pages_nodemask+0x7ff/0xa00
> [ 3.019692] [<ffffffff815b417c>] vmemmap_alloc_block+0x62/0xba
> [ 3.026303] [<ffffffff815b41e9>] vmemmap_alloc_block_buf+0x15/0x3b
> [ 3.033302] [<ffffffff815b1ff6>] vmemmap_populate+0xb4/0x21b
> [ 3.039718] [<ffffffff815b461d>] sparse_mem_map_populate+0x27/0x35
> [ 3.046717] [<ffffffff815b400f>] sparse_add_one_section+0x7a/0x185
> [ 3.053720] [<ffffffff815a1e9f>] __add_pages+0xaf/0x240
> [ 3.059656] [<ffffffff81047359>] arch_add_memory+0x59/0xd0
> [ 3.065877] [<ffffffff815a21d9>] add_memory+0xb9/0x1b0
> [ 3.071713] [<ffffffff81333b9c>] acpi_memory_device_add+0x18d/0x26d
> [ 3.078813] [<ffffffff81309a01>] acpi_bus_device_attach+0x7d/0xcd
> [ 3.085719] [<ffffffff8132379d>] acpi_ns_walk_namespace+0xc8/0x17f
> [ 3.092716] [<ffffffff81309984>] ? acpi_bus_type_and_status+0x90/0x90
> [ 3.100004] [<ffffffff81309984>] ? acpi_bus_type_and_status+0x90/0x90
> [ 3.107293] [<ffffffff81323c8c>] acpi_walk_namespace+0x95/0xc5
> [ 3.113904] [<ffffffff8130a6d6>] acpi_bus_scan+0x8b/0x9d
> [ 3.119933] [<ffffffff81a2019a>] acpi_scan_init+0x63/0x160
> [ 3.126153] [<ffffffff81a1ffb5>] acpi_init+0x25d/0x2a6
> [ 3.131987] [<ffffffff81a1fd58>] ? acpi_sleep_proc_init+0x2a/0x2a
> [ 3.138889] [<ffffffff810020e2>] do_one_initcall+0xe2/0x190
> [ 3.145210] [<ffffffff819e20c4>] kernel_init_freeable+0x17c/0x207
> [ 3.152111] [<ffffffff819e18d0>] ? do_early_param+0x88/0x88
> [ 3.158430] [<ffffffff8159fea0>] ? rest_init+0x80/0x80
> [ 3.164264] [<ffffffff8159feae>] kernel_init+0xe/0x180
> [ 3.170097] [<ffffffff815cca2c>] ret_from_fork+0x7c/0xb0
> [ 3.176123] [<ffffffff8159fea0>] ? rest_init+0x80/0x80
> [ 3.181956] Mem-Info:
> [ 3.184490] Node 0 DMA per-cpu:
> [ 3.188007] CPU 0: hi: 0, btch: 1 usd: 0
> [ 3.193353] Node 0 DMA32 per-cpu:
> [ 3.197060] CPU 0: hi: 42, btch: 7 usd: 0
> [ 3.202410] active_anon:0 inactive_anon:0 isolated_anon:0
> [ 3.202410] active_file:0 inactive_file:0 isolated_file:0
> [ 3.202410] unevictable:0 dirty:0 writeback:0 unstable:0
> [ 3.202410] free:872 slab_reclaimable:13 slab_unreclaimable:1880
> [ 3.202410] mapped:0 shmem:0 pagetables:0 bounce:0
> [ 3.202410] free_cma:0
>
> because the system has run out of memory at boot time. This occurs
> because of the following sequence in the boot:
>
> Main kernel boots and sets E820 map. The second kernel is booted with a
> map generated by the kdump service using memmap= and memmap=exactmap.
> These parameters are added to the kernel parameters of the kdump
> kernel. The kdump kernel has limited memory resources so as not
> to severely impact the main kernel.
>
> The system then panics and the kdump kernel boots (which is a
> completely new kernel boot). During this boot ACPI is initialized and the
> kernel (as can be seen above) traverses the ACPI namespace and finds an
> entry for a memory device to be hotadded.
>
> ie)
>
> [ 3.053720] [<ffffffff815a1e9f>] __add_pages+0xaf/0x240
> [ 3.059656] [<ffffffff81047359>] arch_add_memory+0x59/0xd0
> [ 3.065877] [<ffffffff815a21d9>] add_memory+0xb9/0x1b0
> [ 3.071713] [<ffffffff81333b9c>] acpi_memory_device_add+0x18d/0x26d
> [ 3.078813] [<ffffffff81309a01>] acpi_bus_device_attach+0x7d/0xcd
> [ 3.085719] [<ffffffff8132379d>] acpi_ns_walk_namespace+0xc8/0x17f
> [ 3.092716] [<ffffffff81309984>] ? acpi_bus_type_and_status+0x90/0x90
> [ 3.100004] [<ffffffff81309984>] ? acpi_bus_type_and_status+0x90/0x90
> [ 3.107293] [<ffffffff81323c8c>] acpi_walk_namespace+0x95/0xc5
> [ 3.113904] [<ffffffff8130a6d6>] acpi_bus_scan+0x8b/0x9d
> [ 3.119933] [<ffffffff81a2019a>] acpi_scan_init+0x63/0x160
> [ 3.126153] [<ffffffff81a1ffb5>] acpi_init+0x25d/0x2a6
>
> At this point the kernel adds page table information and the the kdump
> kernel runs out of memory.
>
> This can also be reproduced by using the memmap=exactmap and mem=X
> parameters on the main kernel and booting.
>
> This patchset resolves the problem by adding a kernel parameter,
> acpi_no_memhotplug, to disable ACPI memory hotplug.
>
> [v2]: changed acpi_no_memhotplug to bool
> [v3]: cleaned up Documentation/kernel-parameters.txt
> [v4]: add __initdata to acpi_no_memhotplug
> [v5]: remove kexec, kdump only
>
> Signed-off-by: Prarit Bhargava <prarit at redhat.com>
> Acked-by: Toshi Kani <toshi.kani at hp.com>
> Acked-by: Vivek Goyal <vgoyal at redhat.com>
> Cc: Vivek Goyal <vgoyal at redhat.com>
> Cc: Len Brown <lenb at kernel.org>
> Cc: "Rafael J. Wysocki" <rjw at rjwysocki.net>
> Cc: kosaki.motohiro at gmail.com
> Cc: dyoung at redhat.com
> Cc: rientjes at google.com
> Cc: linux-acpi at vger.kernel.org
> Cc: kexec at lists.infradead.org
> ---
> Documentation/kernel-parameters.txt | 3 +++
> drivers/acpi/acpi_memhotplug.c | 12 ++++++++++++
> 2 files changed, 15 insertions(+)
>
> diff --git a/Documentation/kernel-parameters.txt b/Documentation/kernel-parameters.txt
> index b9e9bd8..6201229 100644
> --- a/Documentation/kernel-parameters.txt
> +++ b/Documentation/kernel-parameters.txt
> @@ -343,6 +343,9 @@ bytes respectively. Such letter suffixes can also be entirely omitted.
> no: ACPI OperationRegions are not marked as reserved,
> no further checks are performed.
>
> + acpi_no_memhotplug [ACPI] Disable memory hotplug. Useful for kdump
> + kernels.
> +
> add_efi_memmap [EFI; X86] Include EFI memory map in
> kernel's map of available physical RAM.
>
> diff --git a/drivers/acpi/acpi_memhotplug.c b/drivers/acpi/acpi_memhotplug.c
> index 551dad7..383cd80 100644
> --- a/drivers/acpi/acpi_memhotplug.c
> +++ b/drivers/acpi/acpi_memhotplug.c
> @@ -361,7 +361,19 @@ static void acpi_memory_device_remove(struct acpi_device *device)
> acpi_memory_device_free(mem_device);
> }
>
> +static bool __initdata acpi_no_memhotplug;
> +
> void __init acpi_memory_hotplug_init(void)
> {
> + if (acpi_no_memhotplug)
> + return;
> +
> acpi_scan_add_handler_with_hotplug(&memory_device_handler, "memory");
> }
> +
> +static int __init disable_acpi_memory_hotplug(char *str)
> +{
> + acpi_no_memhotplug = true;
> + return 1;
> +}
> +__setup("acpi_no_memhotplug", disable_acpi_memory_hotplug);
>
--
I speak only for myself.
Rafael J. Wysocki, Intel Open Source Technology Center.
More information about the kexec
mailing list