[PATCH v2] ARM: head-common.S: relocate atags area if necessary
Daniel Mack
zonque at gmail.com
Fri Oct 18 12:12:56 EDT 2013
If the supplied atags/dtb pointer is located at memory inside the bss
section, it will be erased by __mmap_switched. The problem is that the
code that sets up the pointer can't know about a safe value unless it
examines the kernel's symbol tables, so we should care about that case
and relocate the area if necessary.
This patch does that from inside __vet_atags. In order to determine the
size of the section in dtb cases, it reads the next word after the dtb
binary magic, and also has to convert that value from big to CPU
endianess. For the atags case, a total size of up to 4k is assumed for
now.
Signed-off-by: Daniel Mack <zonque at gmail.com>
---
v2: move the relocation destination to '.end + atags_size' instead of
'.end', because the atags area could actually overlap the .end
pointer, which then would cause the relocation to fail.
arch/arm/kernel/head-common.S | 58 ++++++++++++++++++++++++++++++++++++++-----
1 file changed, 52 insertions(+), 6 deletions(-)
diff --git a/arch/arm/kernel/head-common.S b/arch/arm/kernel/head-common.S
index 47cd974..5434767 100644
--- a/arch/arm/kernel/head-common.S
+++ b/arch/arm/kernel/head-common.S
@@ -36,12 +36,18 @@
* that the pointer be aligned, in the first 16k of physical RAM and
* that the ATAG_CORE marker is first and present. If CONFIG_OF_FLATTREE
* is selected, then it will also accept a dtb pointer. Future revisions
- * of this function may be more lenient with the physical address and
- * may also be able to move the ATAGS block if necessary.
+ * of this function may be more lenient with the physical address.
+ *
+ * It is also checked whether the atags/dtb area is located before the
+ * end of the kernel's bss section and would hence be overridden by zeros
+ * later. In that case, the atags area is relocated to the '_end' symbol.
+ *
+ * r2 = atags or dtb
+ * r8 = phys_offset
*
* Returns:
* r2 either valid atags pointer, valid dtb pointer, or zero
- * r5, r6 corrupted
+ * r3, r5 - r7 corrupted
*/
__vet_atags:
tst r2, #0x3 @ aligned?
@@ -51,21 +57,61 @@ __vet_atags:
#ifdef CONFIG_OF_FLATTREE
ldr r6, =OF_DT_MAGIC @ is it a DTB?
cmp r5, r6
- beq 2f
-#endif
- cmp r5, #ATAG_CORE_SIZE @ is first tag ATAG_CORE?
+ bne 5f
+
+ ldreq r5, [r2, #4] @ fdt total size is at offset 4 ...
+#ifndef CONFIG_CPU_BIG_ENDIAN
+ eor r6, r5, r5, ror #16 @ ... and stored in be32 order
+ mov r6, r6, lsr #8
+ bic r6, r6, #0xff00
+ eor r5, r6, r5, ror #8
+#endif /* !CONFIG_CPU_BIG_ENDIAN */
+
+ add r5, r5, #4 @ align the size to 32bit
+ bic r5, r5, #3
+ b 4f
+#endif /* CONFIG_OF_FLATTREE */
+
+5: cmp r5, #ATAG_CORE_SIZE @ is first tag ATAG_CORE?
cmpne r5, #ATAG_CORE_SIZE_EMPTY
bne 1f
ldr r5, [r2, #4]
ldr r6, =ATAG_CORE
cmp r5, r6
+ movne r5, #4096 @ FIXME: we should walk the atags and
+ @ determine the real size.
bne 1f
+4: adr r3, 6f
+ ldmia r3!, {r6, r7}
+
+ @ The kernel end address is stored in virtual address space, but we're
+ @ still in flat mapping. Hence, we have to do virt_to_phys() manually.
+ subs r6, r6, r7 @ r7 = PAGE_OFFSET
+ add r6, r6, r8 @ r8 = PHYS_OFFET
+
+ cmp r2, r6 @ is the atags pointer inside the
+ @ kernel area?
+ bgt 2f
+
+ add r3, r6, r5 @ relocate start = .end + length
+ add r6, r3, r5 @ relocate end = .end + length * 2
+3: cmp r3, r6
+ ldrne fp, [r2], #4
+ strne fp, [r3], #4
+ bne 3b
+
+ subs r2, r6, r5 @ rewind back to the new
+ @ atags/dtb image start
+
2: mov pc, lr @ atag/dtb pointer is ok
1: mov r2, #0
mov pc, lr
ENDPROC(__vet_atags)
+ .align
+6: .long _end @ r6
+ .long PAGE_OFFSET @ r7
/*
* The following fragment of code is executed with the MMU on in MMU mode,
--
1.8.3.1
More information about the kexec
mailing list