makedumpfile mmap() benchmark

[Jingbai Ma]

On 03/27/2013 02:23 PM, HATAYAMA Daisuke wrote:
> From: Jingbai Ma<jingbai.ma at hp.com>
> Subject: makedumpfile mmap() benchmark
> Date: Wed, 27 Mar 2013 13:51:37 +0800
>
>> Hi,
>>
>> I have tested the makedumpfile mmap patch on a machine with 2TB
>> memory, here is testing results:
>
> Thanks for your benchmark. It's very helpful to see the benchmark on
> different environments.

Thanks for your patch, there is a great performance improvement, very 
impressive!

>
>> Test environment:
>> Machine: HP ProLiant DL980 G7 with 2TB RAM.
>> CPU: Intel(R) Xeon(R) CPU E7- 2860  @ 2.27GHz (8 sockets, 10 cores)
>> (Only 1 cpu was enabled the 2nd kernel)
>> Kernel: 3.9.0-rc3+ with mmap kernel patch v3
>> vmcore size: 2.0TB
>> Dump file size: 3.6GB
>> makedumpfile mmap branch with parameters: -c --message-level 23 -d 31
>> --map-size<map-size>
>
> To reduce the benchmark time, I recommend LZO or snappy compressions
> rather than zlib. zlib is used when -c option is specified, and it's
> too slow for use of crash dump.

That's a very helpful suggestion, I will try it again with LZO/snappy 
lib again.

>
> To build makedumpfile with each compression format supports, do
> USELZO=on or USESNAPPY=on after installing necessary libraries.
>
>> All measured time from debug message of makedumpfile.
>>
>> As a comparison, I also have tested with original kernel and original
>> makedumpfile 1.5.1 and 1.5.3.
>> I added all [Excluding unnecessary pages] and [Excluding free pages]
>> time together as "Filter Pages", and [Copyying Data] as "Copy data"
>> here.
>>
>> makedumjpfile Kernel map-size (KB) Filter pages (s) Copy data (s)
>> Total (s)
>> 1.5.1	 3.7.0-0.36.el7.x86_64	N/A	940.28	1269.25	2209.53
>> 1.5.3	 3.7.0-0.36.el7.x86_64	N/A	380.09	992.77	1372.86
>> 1.5.3	v3.9-rc3	N/A	197.77	892.27	1090.04
>> 1.5.3+mmap	v3.9-rc3+mmap	0	164.87	606.06	770.93
>> 1.5.3+mmap	v3.9-rc3+mmap	4	88.62	576.07	664.69
>> 1.5.3+mmap	v3.9-rc3+mmap	1024	83.66	477.23	560.89
>> 1.5.3+mmap	v3.9-rc3+mmap	2048	83.44	477.21	560.65
>> 1.5.3+mmap	v3.9-rc3+mmap	10240	83.84	476.56	560.4
>
> Did you calculate "Filter pages" by adding two [Excluding unnecessary
> pages] lines? The first one of the two line is displayed by
> get_num_dumpable_cyclic() during the calculation of the total number
> of dumpable pages, which is later used to print progress of writing
> pages in percentage.
>
> For example, here is the log, where the number of cycles is 3, and
>
> mem_map (16399)
>    mem_map    : ffffea0801e00000
>    pfn_start  : 20078000
>    pfn_end    : 20080000
> read /proc/vmcore with mmap()
> STEP [Excluding unnecessary pages] : 13.703842 seconds<-- this part is by get_num_dumpable_cyclic()
> STEP [Excluding unnecessary pages] : 13.842656 seconds
> STEP [Excluding unnecessary pages] : 6.857910 seconds
> STEP [Excluding unnecessary pages] : 13.554281 seconds<-- this part is by the main filtering processing.
> STEP [Excluding unnecessary pages] : 14.103593 seconds
> STEP [Excluding unnecessary pages] : 7.114239 seconds
> STEP [Copying data               ] : 138.442116 seconds
> Writing erase info...
> offset_eraseinfo: 1f4680e40, size_eraseinfo: 0
>
> Original pages  : 0x000000001ffc28a4
> <cut>
>
> So, get_num_dumpable_cyclic() actually does filtering operation but it
> should not be included here.
>
> If so, I guess each measured time would be about 42 seconds, right?
> Then, it's almost same as the result I posted today: 35 seconds.

Yes, I added them together, the following is one dump message log:
<Log>
makedumpfile  -c --message-level 23 -d 31 --map-size 10240 /proc/vmcore 
/sysroot/var/crash/vmcore_10240

cyclic buffer size has been changed: 77661798 => 77661184
Excluding unnecessary pages        : [100 %] STEP [Excluding unnecessary 
pages] : 24.777717 seconds
Excluding unnecessary pages        : [100 %] STEP [Excluding unnecessary 
pages] : 17.291935 seconds
Excluding unnecessary pages        : [100 %] STEP [Excluding unnecessary 
pages] : 24.498559 seconds
Excluding unnecessary pages        : [100 %] STEP [Excluding unnecessary 
pages] : 17.278414 seconds
Copying data                       : [100 %] STEP [Copying data 
       ] : 476.563428 seconds


Original pages  : 0x000000001ffe874d
   Excluded pages   : 0x000000001f79429e
     Pages filled with zero  : 0x00000000002b4c9c
     Cache pages             : 0x00000000000493bc
     Cache pages + private   : 0x00000000000011f3
     User process data pages : 0x0000000000005c55
     Free pages              : 0x000000001f48f3fe
     Hwpoison pages          : 0x0000000000000000
   Remaining pages  : 0x00000000008544af
   (The number of pages is reduced to 1%.)
Memory Hole     : 0x000000001c0178b3
--------------------------------------------------
Total pages     : 0x000000003c000000
</Log>

>
> Thanks.
> HATAYAMA, Daisuke
>


-- 
Thanks,
Jingbai Ma