3.9.0-rc1: kexec not working: root disk does not show up
Vivek Goyal
vgoyal at redhat.com
Fri Mar 8 12:17:05 EST 2013
Hi,
With 3.9.0-rc1, kexec seems to have stopped working on my system. 3.8.0
works just fine.
In second kernel root disk does not show up. Dracut waits for quite some
time and then gives up.
My root is on SATA disk. None of the SATA disks are up. Not sure but
looking at the logs, I am wondering if it is SATA driver related issue.
[ 17.564011] ata4.00: qc timeout (cmd 0xec)
[ 17.568179] ata4.00: failed to IDENTIFY (I/O error, err_mask=0x4)
[ 17.574339] ata4: limiting SATA link speed to 1.5 Gbps
[ 17.579549] ata1.00: qc timeout (cmd 0xec)
[ 17.583716] ata1.00: failed to IDENTIFY (I/O error, err_mask=0x4)
[ 17.589864] ata1: limiting SATA link speed to 1.5 Gbps
[ 17.595070] ata2.00: qc timeout (cmd 0xa1)
[ 17.599231] ata2.00: failed to IDENTIFY (I/O error, err_mask=0x4)
[ 17.605379] ata2: limiting SATA link speed to 1.5 Gbps
[ 17.610593] ata6.00: qc timeout (cmd 0xec)
[ 17.614760] ata6.00: failed to IDENTIFY (I/O error, err_mask=0x4)
[ 17.620908] ata6: limiting SATA link speed to 1.5 Gbps
[ 17.626120] ata3.00: qc timeout (cmd 0xec)
[ 17.630280] ata3.00: failed to IDENTIFY (I/O error, err_mask=0x4)
[ 17.636427] ata3: limiting SATA link speed to 1.5 Gbps
[ 17.913016] ata4: SATA link up 1.5 Gbps (SStatus 113 SControl 310)
[ 17.919279] ata1: SATA link up 1.5 Gbps (SStatus 113 SControl 310)
[ 17.931019] ata2: SATA link up 1.5 Gbps (SStatus 113 SControl 310)
[ 17.943016] ata6: SATA link up 1.5 Gbps (SStatus 113 SControl 310)
[ 17.949275] ata3: SATA link up 1.5 Gbps (SStatus 113 SControl 310)
Following are the console logs of second kernel boot through kexec. And
after that also attaching console logs for regular first kernel boot.
Thanks
Vivek
[ 78.286132] Starting new kernel
[ 0.000000] Initializing cgroup subsys cpuset
[ 0.000000] Initializing cgroup subsys cpu
[ 0.000000] Linux version 3.9.0-rc1+ (<edited>) (gcc version 4.6.3 20120306 (Red Hat 4.6.3-2) (GCC) ) #168 SMP Fri Mar 8 11:26:01 EST 2013
[ 0.000000] Command line: ro root=UUID=90e92cac-8f9b-464d-9e00-11491cc4bf8e rd_NO_LUKS rd_NO_LVM rd_NO_MD rd_NO_DM LANG=en_US.UTF-8 SYSFONT=latarcyrheb-sun16 KEYTABLE=us console=tty0 console=ttyS0,115200n8 selinux=0 crashkernel=128M at 64M
[ 0.000000] e820: BIOS-provided physical RAM map:
[ 0.000000] BIOS-e820: [mem 0x0000000000000100-0x0000000000096fff] usable
[ 0.000000] BIOS-e820: [mem 0x0000000000097000-0x000000000009ffff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000000e8000-0x00000000000fffff] reserved
[ 0.000000] BIOS-e820: [mem 0x0000000000100000-0x00000000bffc283f] usable
[ 0.000000] BIOS-e820: [mem 0x00000000bffc2840-0x00000000bfffffff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000e0000000-0x00000000efffffff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000fec00000-0x00000000ffffffff] reserved
[ 0.000000] BIOS-e820: [mem 0x0000000100000000-0x000000013fffffff] usable
[ 0.000000] NX (Execute Disable) protection: active
[ 0.000000] SMBIOS 2.5 present.
[ 0.000000] No AGP bridge found
[ 0.000000] e820: last_pfn = 0x140000 max_arch_pfn = 0x400000000
[ 0.000000] x86 PAT enabled: cpu 0, old 0x7010600070106, new 0x7010600070106
[ 0.000000] e820: last_pfn = 0xbffc2 max_arch_pfn = 0x400000000
[ 0.000000] found SMP MP-table at [mem 0x000fe700-0x000fe70f] mapped at [ffff8800000fe700]
[ 0.000000] Scanning 1 areas for low memory corruption
[ 0.000000] init_memory_mapping: [mem 0x00000000-0x000fffff]
[ 0.000000] init_memory_mapping: [mem 0x13fe00000-0x13fffffff]
[ 0.000000] init_memory_mapping: [mem 0x13c000000-0x13fdfffff]
[ 0.000000] init_memory_mapping: [mem 0x100000000-0x13bffffff]
[ 0.000000] init_memory_mapping: [mem 0x00100000-0xbffc1fff]
[ 0.000000] RAMDISK: [mem 0x7fb80000-0x7fff4fff]
[ 0.000000] Reserving 128MB of memory at 64MB for crashkernel (System RAM: 4095MB)
[ 0.000000] ACPI: RSDP 00000000000e9810 00024 (v02 HPQOEM)
[ 0.000000] ACPI: XSDT 00000000bffc52ec 0006C (v01 HPQOEM SLIC-WKS 20070918 00000000)
[ 0.000000] ACPI: FACP 00000000bffc5494 000F4 (v03 HPQOEM SEABURG 00000001 00000000)
[ 0.000000] ACPI BIOS Bug: Error: 32/64X address mismatch in FADT/Gpe0Block: 0x0000F828/0x000000000001F030, using 32 (20130117/tbfadt-462)
[ 0.000000] ACPI: DSDT 00000000bffc5a6e 02697 (v01 HPQOEM DSDT 00000001 MSFT 0100000E)
[ 0.000000] ACPI: FACS 00000000bffc5200 00040
[ 0.000000] ACPI: SSDT 00000000bffc8105 06A92 (v01 HPQOEM PROJECT 00000001 MSFT 0100000E)
[ 0.000000] ACPI: APIC 00000000bffc5588 000C8 (v01 HPQOEM SEABURG 00000001 00000000)
[ 0.000000] ACPI: ASF! 00000000bffc5650 0006A (v32 HPQOEM SEABURG 00000001 00000000)
[ 0.000000] ACPI: MCFG 00000000bffc5852 0003C (v01 HPQOEM SEABURG 00000001 00000000)
[ 0.000000] ACPI: SLIC 00000000bffc588e 00176 (v01 HPQOEM SLIC-WKS 00000001 00000000)
[ 0.000000] ACPI: HPET 00000000bffc5a04 00038 (v01 HPQOEM SEABURG 00000001 00000000)
[ 0.000000] ACPI: TCPA 00000000bffc5a3c 00032 (v01 HPQOEM SEABURG 00000001 00000000)
[ 0.000000] ACPI: DMAR 00000000bffc56ba 00108 (v01 HPQOEM SEABURG 00000001 00000000)
[ 0.000000] No NUMA configuration found
[ 0.000000] Faking a node at [mem 0x0000000000000000-0x000000013fffffff]
[ 0.000000] Initmem setup node 0 [mem 0x00000000-0x13fffffff]
[ 0.000000] NODE_DATA [mem 0x13fff9000-0x13fffcfff]
[ 0.000000] Zone ranges:
[ 0.000000] DMA [mem 0x00001000-0x00ffffff]
[ 0.000000] DMA32 [mem 0x01000000-0xffffffff]
[ 0.000000] Normal [mem 0x100000000-0x13fffffff]
[ 0.000000] Movable zone start for each node
[ 0.000000] Early memory node ranges
[ 0.000000] node 0: [mem 0x00001000-0x00096fff]
[ 0.000000] node 0: [mem 0x00100000-0xbffc1fff]
[ 0.000000] node 0: [mem 0x100000000-0x13fffffff]
[ 0.000000] ACPI: PM-Timer IO Port: 0xf808
[ 0.000000] ACPI: LAPIC (acpi_id[0x01] lapic_id[0x00] enabled)
[ 0.000000] ACPI: LAPIC (acpi_id[0x02] lapic_id[0x02] enabled)
[ 0.000000] ACPI: LAPIC (acpi_id[0x03] lapic_id[0x01] enabled)
[ 0.000000] ACPI: LAPIC (acpi_id[0x04] lapic_id[0x03] enabled)
[ 0.000000] ACPI: LAPIC (acpi_id[0x05] lapic_id[0x08] disabled)
[ 0.000000] ACPI: LAPIC (acpi_id[0x06] lapic_id[0x09] disabled)
[ 0.000000] ACPI: LAPIC (acpi_id[0x07] lapic_id[0x0a] disabled)
[ 0.000000] ACPI: LAPIC (acpi_id[0x08] lapic_id[0x0b] disabled)
[ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x01] high edge lint[0x1])
[ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x02] high edge lint[0x1])
[ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x03] high edge lint[0x1])
[ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x04] high edge lint[0x1])
[ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x05] high edge lint[0x1])
[ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x06] high edge lint[0x1])
[ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x07] high edge lint[0x1])
[ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x08] high edge lint[0x1])
[ 0.000000] ACPI: IOAPIC (id[0x01] address[0xfec00000] gsi_base[0])
[ 0.000000] IOAPIC[0]: apic_id 1, version 32, address 0xfec00000, GSI 0-23
[ 0.000000] ACPI: IOAPIC (id[0x02] address[0xfec89000] gsi_base[24])
[ 0.000000] IOAPIC[1]: apic_id 2, version 32, address 0xfec89000, GSI 24-47
[ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
[ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level)
[ 0.000000] Using ACPI (MADT) for SMP configuration information
[ 0.000000] ACPI: HPET id: 0x8086a201 base: 0xfed00000
[ 0.000000] smpboot: Allowing 8 CPUs, 4 hotplug CPUs
[ 0.000000] PM: Registered nosave memory: 0000000000097000 - 00000000000a0000
[ 0.000000] PM: Registered nosave memory: 00000000000a0000 - 00000000000e8000
[ 0.000000] PM: Registered nosave memory: 00000000000e8000 - 0000000000100000
[ 0.000000] PM: Registered nosave memory: 00000000bffc2000 - 00000000bffc3000
[ 0.000000] PM: Registered nosave memory: 00000000bffc3000 - 00000000c0000000
[ 0.000000] PM: Registered nosave memory: 00000000c0000000 - 00000000e0000000
[ 0.000000] PM: Registered nosave memory: 00000000e0000000 - 00000000f0000000
[ 0.000000] PM: Registered nosave memory: 00000000f0000000 - 00000000fec00000
[ 0.000000] PM: Registered nosave memory: 00000000fec00000 - 0000000100000000
[ 0.000000] e820: [mem 0xc0000000-0xdfffffff] available for PCI devices
[ 0.000000] setup_percpu: NR_CPUS:64 nr_cpumask_bits:64 nr_cpu_ids:8 nr_node_ids:1
[ 0.000000] PERCPU: Embedded 27 pages/cpu @ffff88013fc00000 s80000 r8192 d22400 u262144
[ 0.000000] Built 1 zonelists in Node order, mobility grouping on. Total pages: 1032002
[ 0.000000] Policy zone: Normal
[ 0.000000] Kernel command line: ro root=UUID=90e92cac-8f9b-464d-9e00-11491cc4bf8e rd_NO_LUKS rd_NO_LVM rd_NO_MD rd_NO_DM LANG=en_US.UTF-8 SYSFONT=latarcyrheb-sun16 KEYTABLE=us console=tty0 console=ttyS0,115200n8 selinux=0 crashkernel=128M at 64M
[ 0.000000] PID hash table entries: 4096 (order: 3, 32768 bytes)
[ 0.000000] __ex_table already sorted, skipping sort
[ 0.000000] Checking aperture...
[ 0.000000] No AGP bridge found
[ 0.000000] Memory: 3907908k/5242880k available (8771k kernel code, 1049248k absent, 285724k reserved, 6390k data, 1160k init)
[ 0.000000] SLUB: Genslabs=15, HWalign=64, Order=0-3, MinObjects=0, CPUs=8, Nodes=1
[ 0.000000] Hierarchical RCU implementation.
[ 0.000000] RCU restricting CPUs from NR_CPUS=64 to nr_cpu_ids=8.
[ 0.000000] NR_IRQS:4352 nr_irqs:1152 16
[ 0.000000] Console: colour VGA+ 80x25
[ 0.000000] console [tty0] enabled
[ 0.000000] console [ttyS0] enabled
[ 0.000000] tsc: Fast TSC calibration using PIT
[ 0.000000] tsc: Detected 2333.212 MHz processor
[ 0.003004] Calibrating delay loop (skipped), value calculated using timer frequency.. 4666.42 BogoMIPS (lpj=2333212)
[ 0.005003] pid_max: default: 32768 minimum: 301
[ 0.006037] Security Framework initialized
[ 0.007006] SELinux: Disabled at boot.
[ 0.009034] Dentry cache hash table entries: 524288 (order: 10, 4194304 bytes)
[ 0.012165] Inode-cache hash table entries: 262144 (order: 9, 2097152 bytes)
[ 0.014109] Mount-cache hash table entries: 256
[ 0.015275] Initializing cgroup subsys cpuacct
[ 0.016004] Initializing cgroup subsys freezer
[ 0.017003] Initializing cgroup subsys blkio
[ 0.018041] CPU: Physical Processor ID: 0
[ 0.019003] CPU: Processor Core ID: 0
[ 0.020003] mce: CPU supports 6 MCE banks
[ 0.021015] Last level iTLB entries: 4KB 128, 2MB 4, 4MB 4
[ 0.021015] Last level dTLB entries: 4KB 256, 2MB 0, 4MB 32
[ 0.021015] tlb_flushall_shift: -1
[ 0.022108] Freeing SMP alternatives: 28k freed
[ 0.023017] ACPI: Core revision 20130117
[ 0.026741] ACPI: All ACPI Tables successfully acquired
[ 0.029012] ftrace: allocating 30474 entries in 120 pages
[ 0.038566] ..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1
[ 0.039000] ..MP-BIOS bug: 8254 timer not connected to IO-APIC
[ 0.039000] ...trying to set up timer (IRQ0) through the 8259A ...
[ 0.039000] ..... (found apic 0 pin 2) ...
[ 0.039000] ....... failed.
[ 0.039000] ...trying to set up timer as Virtual Wire IRQ...
[ 0.049837] ..... works.
[ 0.050001] smpboot: CPU0: Genuine Intel(R) CPU @ 2.33GHz (fam: 06, model: 17, stepping: 04)
[ 0.055000] Performance Events: PEBS fmt0+, 4-deep LBR, Core2 events, Intel PMU driver.
[ 0.059002] ... version: 2
[ 0.060001] ... bit width: 40
[ 0.061001] ... generic registers: 2
[ 0.062001] ... value mask: 000000ffffffffff
[ 0.063001] ... max period: 000000007fffffff
[ 0.064001] ... fixed-purpose events: 3
[ 0.065001] ... event mask: 0000000700000003
[ 0.067132] smpboot: Booting Node 0, Processors #1 #2 #3
[ 0.106013] Brought up 4 CPUs
[ 0.107003] smpboot: Total of 4 processors activated (18665.69 BogoMIPS)
[ 0.110027] EVM: security.selinux
[ 0.111002] EVM: security.ima
[ 0.112001] EVM: security.capability
[ 0.113311] xor: measuring software checksum speed
[ 0.124002] prefetch64-sse: 10032.000 MB/sec
[ 0.135002] generic_sse: 8868.000 MB/sec
[ 0.136001] xor: using function: prefetch64-sse (10032.000 MB/sec)
[ 0.137021] RTC time: 11:34:18, date: 03/08/13
[ 0.138061] NET: Registered protocol family 16
[ 0.140097] ACPI: bus type PCI registered
[ 0.141030] PCI: MMCONFIG for domain 0000 [bus 00-ff] at [mem 0xe0000000-0xefffffff] (base 0xe0000000)
[ 0.142007] PCI: MMCONFIG at [mem 0xe0000000-0xefffffff] reserved in E820
[ 0.158208] PCI: Using configuration type 1 for base access
[ 0.180046] bio: create slab <bio-0> at 0
[ 0.200279] raid6: sse2x1 3210 MB/s
[ 0.220281] raid6: sse2x2 5792 MB/s
[ 0.240279] raid6: sse2x4 6367 MB/s
[ 0.244002] raid6: using algorithm sse2x4 (6367 MB/s)
[ 0.249002] raid6: using ssse3x2 recovery algorithm
[ 0.254021] ACPI: Added _OSI(Module Device)
[ 0.259004] ACPI: Added _OSI(Processor Device)
[ 0.264002] ACPI: Added _OSI(3.0 _SCP Extensions)
[ 0.269002] ACPI: Added _OSI(Processor Aggregator Device)
[ 0.287016] ACPI: SSDT 00000000bffd07c1 008C4 (v01 HPQOEM CPU_TM2 00000001 MSFT 0100000E)
[ 0.295577] ACPI: Dynamic OEM Table Load:
[ 0.300255] ACPI: SSDT (null) 008C4 (v01 HPQOEM CPU_TM2 00000001 MSFT 0100000E)
[ 0.314303] ACPI: Interpreter enabled
[ 0.318007] ACPI Exception: AE_NOT_FOUND, While evaluating Sleep State [\_S1_] (20130117/hwxface-568)
[ 0.328002] ACPI Exception: AE_NOT_FOUND, While evaluating Sleep State [\_S2_] (20130117/hwxface-568)
[ 0.337010] ACPI: (supports S0 S3 S4 S5)
[ 0.341002] ACPI: Using IOAPIC for interrupt routing
[ 0.346024] PCI: Ignoring host bridge windows from ACPI; if necessary, use "pci=use_crs" and report a bug
[ 0.371038] ACPI: PCI Root Bridge [PCI0] (domain 0000 [bus 00-ff])
[ 0.377054] ACPI Error: [CAPD] Namespace lookup failure, AE_ALREADY_EXISTS (20130117/dsfield-211)
[ 0.387002] ACPI Error: Method parse/execution failed [\_SB_.PCI0._OSC] (Node ffff88013aa61c30), AE_ALREADY_EXISTS (20130117/psparse-537)
[ 0.399002] ACPI: Marking method _OSC as Serialized because of AE_ALREADY_EXISTS error
[ 0.407045] ACPI Error: [CAPD] Namespace lookup failure, AE_ALREADY_EXISTS (20130117/dsfield-211)
[ 0.416002] ACPI Error: Method parse/execution failed [\_SB_.PCI0._OSC] (Node ffff88013aa61c30), AE_ALREADY_EXISTS (20130117/psparse-537)
[ 0.429006] acpi PNP0A08:00: ACPI _OSC support notification failed, disabling PCIe ASPM
[ 0.437002] acpi PNP0A08:00: Unable to request _OSC control (_OSC support mask: 0x08)
[ 0.445055] PCI host bridge to bus 0000:00
[ 0.449005] pci_bus 0000:00: root bus resource [bus 00-ff]
[ 0.455003] pci_bus 0000:00: root bus resource [io 0x0000-0xffff]
[ 0.461002] pci_bus 0000:00: root bus resource [mem 0x00000000-0x3fffffffff]
[ 0.469088] pci 0000:00:01.0: System wakeup disabled by ACPI
[ 0.474092] pci 0000:00:05.0: System wakeup disabled by ACPI
[ 0.480093] pci 0000:00:09.0: System wakeup disabled by ACPI
[ 0.488198] pci 0000:00:1c.0: System wakeup disabled by ACPI
[ 0.494124] pci 0000:00:1d.0: System wakeup disabled by ACPI
[ 0.500108] pci 0000:00:1d.1: System wakeup disabled by ACPI
[ 0.506105] pci 0000:00:1d.2: System wakeup disabled by ACPI
[ 0.512107] pci 0000:00:1d.3: System wakeup disabled by ACPI
[ 0.517165] pci 0000:00:1d.7: System wakeup disabled by ACPI
[ 0.523090] pci 0000:00:1e.0: System wakeup disabled by ACPI
[ 0.530184] pci 0000:00:01.0: PCI bridge to [bus 80]
[ 0.535072] pci 0000:60:00.0: System wakeup disabled by ACPI
[ 0.543013] pci 0000:00:05.0: PCI bridge to [bus 60]
[ 0.559008] pci 0000:00:09.0: PCI bridge to [bus 10-40]
[ 0.569972] pci 0000:1e:00.0: System wakeup disabled by ACPI
[ 0.580060] pci 0000:1e:01.0: System wakeup disabled by ACPI
[ 0.587184] pci 0000:10:00.0: PCI bridge to [bus 1e-40]
[ 0.595031] pci 0000:1e:00.0: PCI bridge to [bus 20]
[ 0.606331] pci 0000:40:00.0: System wakeup disabled by ACPI
[ 0.612281] pci 0000:1e:01.0: PCI bridge to [bus 40]
[ 0.621230] pci 0000:10:00.3: PCI bridge to [bus 11-1d]
[ 0.628272] pci 0000:0e:00.0: System wakeup disabled by ACPI
[ 0.636052] pci 0000:00:1c.0: PCI bridge to [bus 0e]
[ 0.641052] pci 0000:00:1e.0: PCI bridge to [bus 01] (subtractive decode)
[ 0.648032] ACPI _OSC control for PCIe not granted, disabling ASPM
[ 0.655324] ACPI: PCI Interrupt Link [LNKA] (IRQs *3 4 5 6 7 10 11 14 15), disabled.
[ 0.663054] ACPI: PCI Interrupt Link [LNKB] (IRQs 3 4 *5 6 7 10 11 14 15), disabled.
[ 0.671307] ACPI: PCI Interrupt Link [LNKC] (IRQs 3 4 5 6 *7 10 11 14 15), disabled.
[ 0.680314] ACPI: PCI Interrupt Link [LNKD] (IRQs 3 4 *5 6 7 10 11 14 15), disabled.
[ 0.688307] ACPI: PCI Interrupt Link [LNKE] (IRQs 3 4 5 6 7 10 11 14 15) *0, disabled.
[ 0.697314] ACPI: PCI Interrupt Link [LNKF] (IRQs *3 4 5 6 7 10 11 14 15), disabled.
[ 0.705306] ACPI: PCI Interrupt Link [LNKG] (IRQs 3 4 5 6 7 *10 11 14 15), disabled.
[ 0.714311] ACPI: PCI Interrupt Link [LNKH] (IRQs 3 4 5 6 7 10 11 14 15) *0, disabled.
[ 0.723080] ACPI: No dock devices found.
[ 0.727034] vgaarb: device added: PCI:0000:60:00.0,decodes=io+mem,owns=io+mem,locks=none
[ 0.735004] vgaarb: loaded
[ 0.738001] vgaarb: bridge control possible 0000:60:00.0
[ 0.744075] SCSI subsystem initialized
[ 0.748004] ACPI: bus type ATA registered
[ 0.752034] ACPI: bus type USB registered
[ 0.756034] usbcore: registered new interface driver usbfs
[ 0.762020] usbcore: registered new interface driver hub
[ 0.767035] usbcore: registered new device driver usb
[ 0.773034] pps_core: LinuxPPS API ver. 1 registered
[ 0.778009] pps_core: Software ver. 5.3.6 - Copyright 2005-2007 Rodolfo Giometti <giometti at linux.it>
[ 0.787019] PTP clock support registered
[ 0.791043] Advanced Linux Sound Architecture Driver Initialized.
[ 0.798003] PCI: Using ACPI for IRQ routing
[ 0.850063] cfg80211: Calling CRDA to update world regulatory domain
[ 0.852127] NetLabel: Initializing
[ 0.852128] NetLabel: domain hash size = 128
[ 0.852129] NetLabel: protocols = UNLABELED CIPSOv4
[ 0.852177] NetLabel: unlabeled traffic allowed by default
[ 0.852208] HPET: 3 timers in total, 0 timers will be used for per-cpu timer
[ 0.852208] hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0
[ 0.852208] hpet0: 3 comparators, 64-bit 14.318180 MHz counter
[ 0.893076] Switching to clocksource hpet
[ 0.903801] pnp: PnP ACPI init
[ 0.906931] ACPI: bus type PNP registered
[ 0.912914] system 00:0b: [io 0x04d0-0x04d1] has been reserved
[ 0.919062] system 00:0c: [io 0x0400-0x041f] has been reserved
[ 0.925046] system 00:0c: [io 0x0420-0x043f] has been reserved
[ 0.931032] system 00:0c: [io 0x0440-0x045f] has been reserved
[ 0.937019] system 00:0c: [io 0x0460-0x047f] has been reserved
[ 0.943005] system 00:0c: [io 0x0480-0x048f] has been reserved
[ 0.948990] system 00:0c: [io 0x0490-0x049f] has been reserved
[ 0.954977] system 00:0c: [io 0xf800-0xf81f] has been reserved
[ 0.960964] system 00:0c: [io 0xf820-0xf83f] has been reserved
[ 0.966951] system 00:0c: [io 0xf840-0xf85f] has been reserved
[ 0.972938] system 00:0c: [io 0xf860-0xf87f] has been reserved
[ 0.978925] system 00:0c: [io 0xfa00-0xfa3f] has been reserved
[ 0.984911] system 00:0c: [io 0xfc00-0xfc7f] has been reserved
[ 0.990898] system 00:0c: [io 0xfc80-0xfcff] has been reserved
[ 0.996885] system 00:0c: [io 0xfe00-0xfe7f] has been reserved
[ 1.002872] system 00:0c: [io 0xfe80-0xfeff] has been reserved
[ 1.008991] system 00:0d: [mem 0xfed1c000-0xfed1ffff] has been reserved
[ 1.015668] system 00:0d: [mem 0xffe00000-0xffffffff] has been reserved
[ 1.022350] system 00:0d: [mem 0xfee00000-0xfeefffff] has been reserved
[ 1.029031] system 00:0d: [mem 0xfe700000-0xfe7003ff] has been reserved
[ 1.035712] system 00:0d: [mem 0xfe600000-0xfe6fffff] has been reserved
[ 1.042393] system 00:0d: [mem 0xfe000000-0xfe01ffff] has been reserved
[ 1.049354] system 00:0e: [mem 0x00000000-0x0009ffff] could not be reserved
[ 1.056380] system 00:0e: [mem 0x000c0000-0x000e7fff] could not be reserved
[ 1.063408] system 00:0e: [mem 0x000e8000-0x000effff] could not be reserved
[ 1.070436] system 00:0e: [mem 0x000f0000-0x000fffff] could not be reserved
[ 1.077464] system 00:0e: [mem 0x00100000-0xbfffffff] could not be reserved
[ 1.084495] system 00:0e: [mem 0xfeda0000-0xfedbffff] has been reserved
[ 1.091327] system 00:0f: [mem 0xe0000000-0xefffffff] has been reserved
[ 1.098030] pnp: PnP ACPI: found 16 devices
[ 1.102277] ACPI: bus type PNP unregistered
[ 1.118954] pci 0000:0e:00.0: no compatible bridge window for [mem 0xde7e0000-0xde7effff pref]
[ 1.128749] pci 0000:00:01.0: PCI bridge to [bus 80]
[ 1.133794] pci 0000:60:00.0: BAR 6: can't assign mem pref (size 0x20000)
[ 1.140642] pci 0000:00:05.0: PCI bridge to [bus 60]
[ 1.145677] pci 0000:00:05.0: bridge window [io 0x1000-0x1fff]
[ 1.151839] pci 0000:00:05.0: bridge window [mem 0xf0000000-0xf2ffffff]
[ 1.158694] pci 0000:00:05.0: bridge window [mem 0xc0000000-0xdfffffff 64bit pref]
[ 1.166541] pci 0000:1e:00.0: PCI bridge to [bus 20]
[ 1.171944] pci 0000:40:00.0: BAR 6: assigned [mem 0xf3400000-0xf347ffff pref]
[ 1.179265] pci 0000:1e:01.0: PCI bridge to [bus 40]
[ 1.184299] pci 0000:1e:01.0: bridge window [io 0x2000-0x2fff]
[ 1.190551] pci 0000:1e:01.0: bridge window [mem 0xf3100000-0xf31fffff]
[ 1.197447] pci 0000:1e:01.0: bridge window [mem 0xf3400000-0xf34fffff 64bit pref]
[ 1.205424] pci 0000:10:00.0: PCI bridge to [bus 1e-40]
[ 1.210713] pci 0000:10:00.0: bridge window [io 0x2000-0x2fff]
[ 1.216966] pci 0000:10:00.0: bridge window [mem 0xf3100000-0xf31fffff]
[ 1.223859] pci 0000:10:00.0: bridge window [mem 0xf3400000-0xf34fffff 64bit pref]
[ 1.231835] pci 0000:10:00.3: PCI bridge to [bus 11-1d]
[ 1.237492] pci 0000:00:09.0: PCI bridge to [bus 10-40]
[ 1.242781] pci 0000:00:09.0: bridge window [io 0x2000-0x2fff]
[ 1.248943] pci 0000:00:09.0: bridge window [mem 0xf3100000-0xf32fffff]
[ 1.255798] pci 0000:00:09.0: bridge window [mem 0xf3400000-0xf34fffff 64bit pref]
[ 1.263645] pci 0000:0e:00.0: BAR 6: assigned [mem 0xf3500000-0xf350ffff pref]
[ 1.270969] pci 0000:00:1c.0: PCI bridge to [bus 0e]
[ 1.276004] pci 0000:00:1c.0: bridge window [io 0x4000-0x4fff]
[ 1.282162] pci 0000:00:1c.0: bridge window [mem 0xf3000000-0xf30fffff]
[ 1.289018] pci 0000:00:1c.0: bridge window [mem 0xf3500000-0xf36fffff 64bit pref]
[ 1.296865] pci 0000:00:1e.0: PCI bridge to [bus 01]
[ 1.303293] NET: Registered protocol family 2
[ 1.307928] TCP established hash table entries: 32768 (order: 7, 524288 bytes)
[ 1.315542] TCP bind hash table entries: 32768 (order: 8, 1048576 bytes)
[ 1.322741] TCP: Hash tables configured (established 32768 bind 32768)
[ 1.329384] TCP: reno registered
[ 1.332694] UDP hash table entries: 2048 (order: 5, 196608 bytes)
[ 1.338949] UDP-Lite hash table entries: 2048 (order: 5, 196608 bytes)
[ 1.346469] NET: Registered protocol family 1
[ 1.351012] RPC: Registered named UNIX socket transport module.
[ 1.356996] RPC: Registered udp transport module.
[ 1.361766] RPC: Registered tcp transport module.
[ 1.366535] RPC: Registered tcp NFSv4.1 backchannel transport module.
[ 1.374378] pci 0000:00:1f.0: rerouting interrupts for [8086:2670]
[ 1.380936] Trying to unpack rootfs image as initramfs...
[ 1.470967] Freeing initrd memory: 4564k freed
[ 1.477127] dmar: Host address width 36
[ 1.481034] dmar: DRHD base: 0x000000fe710000 flags: 0x0
[ 1.486434] dmar: IOMMU 0: reg_base_addr fe710000 ver 1:0 cap 900800c2f0462 ecap e01
[ 1.494272] dmar: DRHD base: 0x000000fe714000 flags: 0x0
[ 1.499653] dmar: IOMMU 1: reg_base_addr fe714000 ver 1:0 cap 900800c2f0462 ecap e01
[ 1.507499] dmar: DRHD base: 0x000000fe719000 flags: 0x0
[ 1.512878] dmar: IOMMU 2: reg_base_addr fe719000 ver 1:0 cap 900800c2f0462 ecap e01
[ 1.520720] dmar: DRHD base: 0x000000fe718000 flags: 0x1
[ 1.526100] dmar: IOMMU 3: reg_base_addr fe718000 ver 1:0 cap 900800c2f0462 ecap e01
[ 1.533943] dmar: RMRR base: 0x000000bffd3000 end: 0x000000bffd3fff
[ 1.540273] dmar: RMRR base: 0x000000bffd4000 end: 0x000000bffd4fff
[ 1.546602] dmar: RMRR base: 0x000000bffd5000 end: 0x000000bffd5fff
[ 1.552931] dmar: RMRR base: 0x000000bffd6000 end: 0x000000bffd6fff
[ 1.559275] PCI-DMA: Using software bounce buffering for IO (SWIOTLB)
[ 1.565780] software IO TLB [mem 0xbbfc2000-0xbffc2000] (64MB) mapped at [ffff8800bbfc2000-ffff8800bffc1fff]
[ 1.577157] microcode: CPU0 sig=0x10674, pf=0x40, revision=0x404
[ 1.583224] microcode: CPU1 sig=0x10674, pf=0x40, revision=0x404
[ 1.589304] microcode: CPU2 sig=0x10674, pf=0x40, revision=0x404
[ 1.595375] microcode: CPU3 sig=0x10674, pf=0x40, revision=0x404
[ 1.601536] microcode: Microcode Update Driver: v2.00 <tigran at aivazian.fsnet.co.uk>, Peter Oruba
[ 1.610416] Scanning for low memory corruption every 60 seconds
[ 1.616959] Initialise module verification
[ 1.621181] audit: initializing netlink socket (disabled)
[ 1.626667] type=2000 audit(1362742457.625:1): initialized
[ 1.664001] HugeTLB registered 2 MB page size, pre-allocated 0 pages
[ 1.677912] VFS: Disk quotas dquot_6.5.2
[ 1.682043] Dquot-cache hash table entries: 512 (order 0, 4096 bytes)
[ 1.690900] NFS: Registering the id_resolver key type
[ 1.696024] Key type id_resolver registered
[ 1.700279] Key type id_legacy registered
[ 1.704466] msgmni has been set to 7641
[ 1.709276] Key type asymmetric registered
[ 1.713444] Asymmetric key parser 'x509' registered
[ 1.718587] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 251)
[ 1.726134] io scheduler noop registered
[ 1.730124] io scheduler deadline registered
[ 1.734579] io scheduler cfq registered (default)
[ 1.743917] pci_hotplug: PCI Hot Plug PCI Core version: 0.5
[ 1.749986] input: Power Button as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0C:00/input/input0
[ 1.758437] ACPI: Power Button [PBTN]
[ 1.762292] input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input1
[ 1.769785] ACPI: Power Button [PWRF]
[ 1.773899] ACPI: Requesting acpi_cpufreq
[ 1.781088] Serial: 8250/16550 driver, 4 ports, IRQ sharing enabled
[ 1.808005] 00:07: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
[ 1.814873] Non-volatile memory driver v1.3
[ 1.819226] Linux agpgart interface v0.103
[ 1.823870] [drm] Initialized drm 1.1.0 20060810
[ 1.832523] brd: module loaded
[ 1.837698] loop: module loaded
[ 1.841684] ahci 0000:00:1f.2: AHCI 0001.0100 32 slots 6 ports 3 Gbps 0x3f impl RAID mode
[ 1.849958] ahci 0000:00:1f.2: flags: 64bit ncq pm led slum part
[ 1.858330] scsi0 : ahci
[ 1.861210] scsi1 : ahci
[ 1.864056] scsi2 : ahci
[ 1.866914] scsi3 : ahci
[ 1.869769] scsi4 : ahci
[ 1.872626] scsi5 : ahci
[ 1.875419] ata1: SATA max UDMA/133 abar m1024 at 0xf3304400 port 0xf3304500 irq 19
[ 1.882915] ata2: SATA max UDMA/133 abar m1024 at 0xf3304400 port 0xf3304580 irq 19
[ 1.890413] ata3: SATA max UDMA/133 abar m1024 at 0xf3304400 port 0xf3304600 irq 19
[ 1.897910] ata4: SATA max UDMA/133 abar m1024 at 0xf3304400 port 0xf3304680 irq 19
[ 1.905407] ata5: SATA max UDMA/133 abar m1024 at 0xf3304400 port 0xf3304700 irq 19
[ 1.912904] ata6: SATA max UDMA/133 abar m1024 at 0xf3304400 port 0xf3304780 irq 19
[ 1.921786] scsi6 : ata_piix
[ 1.924968] scsi7 : ata_piix
[ 1.928098] ata7: PATA max UDMA/100 cmd 0x1f0 ctl 0x3f6 bmdma 0x30c0 irq 14
[ 1.935120] ata8: PATA max UDMA/100 cmd 0x170 ctl 0x376 bmdma 0x30c8 irq 15
[ 1.942775] tg3.c:v3.130 (February 14, 2013)
[ 1.972566] tg3 0000:0e:00.0 eth0: Tigon3 [partno(BCM95755) rev a002] (PCI Express) MAC address 00:19:bb:ea:3c:7d
[ 1.982920] tg3 0000:0e:00.0 eth0: attached PHY is 5755 (10/100/1000Base-T Ethernet) (WireSpeed[1], EEE[0])
[ 1.992757] tg3 0000:0e:00.0 eth0: RXcsums[1] LinkChgREG[0] MIirq[0] ASF[0] TSOcap[1]
[ 2.000682] tg3 0000:0e:00.0 eth0: dma_rwctrl[76180000] dma_mask[64-bit]
[ 2.007587] e100: Intel(R) PRO/100 Network Driver, 3.5.24-k2-NAPI
[ 2.013742] e100: Copyright(c) 1999-2006 Intel Corporation
[ 2.019389] e1000: Intel(R) PRO/1000 Network Driver - version 7.3.21-k8-NAPI
[ 2.026500] e1000: Copyright (c) 1999-2006 Intel Corporation.
[ 2.032406] sky2: driver version 1.30
[ 2.036725] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
[ 2.043325] ehci-pci: EHCI PCI platform driver
[ 2.047993] ehci-pci 0000:00:1d.7: EHCI Host Controller
[ 2.053397] ehci-pci 0000:00:1d.7: new USB bus registered, assigned bus number 1
[ 2.060906] ehci-pci 0000:00:1d.7: debug port 1
[ 2.069457] ehci-pci 0000:00:1d.7: irq 16, io mem 0xf3304000
[ 2.081017] ehci-pci 0000:00:1d.7: USB 2.0 started, EHCI 1.00
[ 2.086870] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002
[ 2.093721] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 2.101040] usb usb1: Product: EHCI Host Controller
[ 2.105982] usb usb1: Manufacturer: Linux 3.9.0-rc1+ ehci_hcd
[ 2.111790] usb usb1: SerialNumber: 0000:00:1d.7
[ 2.116724] hub 1-0:1.0: USB hub found
[ 2.120545] hub 1-0:1.0: 8 ports detected
[ 2.124828] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver
[ 2.131174] uhci_hcd: USB Universal Host Controller Interface driver
[ 2.137738] uhci_hcd 0000:00:1d.0: UHCI Host Controller
[ 2.143141] uhci_hcd 0000:00:1d.0: new USB bus registered, assigned bus number 2
[ 2.150640] uhci_hcd 0000:00:1d.0: detected 2 ports
[ 2.155615] uhci_hcd 0000:00:1d.0: irq 16, io base 0x00003000
[ 2.161468] usb usb2: New USB device found, idVendor=1d6b, idProduct=0001
[ 2.168319] usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 2.175642] usb usb2: Product: UHCI Host Controller
[ 2.180585] usb usb2: Manufacturer: Linux 3.9.0-rc1+ uhci_hcd
[ 2.186394] usb usb2: SerialNumber: 0000:00:1d.0
[ 2.191310] hub 2-0:1.0: USB hub found
[ 2.195139] hub 2-0:1.0: 2 ports detected
[ 2.199413] uhci_hcd 0000:00:1d.1: UHCI Host Controller
[ 2.204827] uhci_hcd 0000:00:1d.1: new USB bus registered, assigned bus number 3
[ 2.212335] uhci_hcd 0000:00:1d.1: detected 2 ports
[ 2.217305] uhci_hcd 0000:00:1d.1: irq 19, io base 0x00003020
[ 2.223167] usb usb3: New USB device found, idVendor=1d6b, idProduct=0001
[ 2.225037] ata5: SATA link down (SStatus 0 SControl 300)
[ 2.225064] ata3: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
[ 2.225087] ata2: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
[ 2.225114] ata1: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
[ 2.225133] ata4: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
[ 2.225154] ata6: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
[ 2.266626] usb usb3: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 2.273950] usb usb3: Product: UHCI Host Controller
[ 2.278891] usb usb3: Manufacturer: Linux 3.9.0-rc1+ uhci_hcd
[ 2.284700] usb usb3: SerialNumber: 0000:00:1d.1
[ 2.289633] hub 3-0:1.0: USB hub found
[ 2.293454] hub 3-0:1.0: 2 ports detected
[ 2.297779] uhci_hcd 0000:00:1d.2: UHCI Host Controller
[ 2.303174] uhci_hcd 0000:00:1d.2: new USB bus registered, assigned bus number 4
[ 2.310668] uhci_hcd 0000:00:1d.2: detected 2 ports
[ 2.315644] uhci_hcd 0000:00:1d.2: irq 18, io base 0x00003040
[ 2.321502] usb usb4: New USB device found, idVendor=1d6b, idProduct=0001
[ 2.328347] usb usb4: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 2.335661] usb usb4: Product: UHCI Host Controller
[ 2.340597] usb usb4: Manufacturer: Linux 3.9.0-rc1+ uhci_hcd
[ 2.346400] usb usb4: SerialNumber: 0000:00:1d.2
[ 2.351290] hub 4-0:1.0: USB hub found
[ 2.355110] hub 4-0:1.0: 2 ports detected
[ 2.359378] uhci_hcd 0000:00:1d.3: UHCI Host Controller
[ 2.364753] uhci_hcd 0000:00:1d.3: new USB bus registered, assigned bus number 5
[ 2.372252] uhci_hcd 0000:00:1d.3: detected 2 ports
[ 2.377222] uhci_hcd 0000:00:1d.3: irq 22, io base 0x00003060
[ 2.383074] usb usb5: New USB device found, idVendor=1d6b, idProduct=0001
[ 2.389922] usb usb5: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 2.397238] usb usb5: Product: UHCI Host Controller
[ 2.402182] usb usb5: Manufacturer: Linux 3.9.0-rc1+ uhci_hcd
[ 2.407990] usb usb5: SerialNumber: 0000:00:1d.3
[ 2.412895] hub 5-0:1.0: USB hub found
[ 2.417495] hub 5-0:1.0: 2 ports detected
[ 2.421795] usbcore: registered new interface driver usblp
[ 2.427343] Initializing USB Mass Storage driver...
[ 2.432364] usbcore: registered new interface driver usb-storage
[ 2.438432] USB Mass Storage support registered.
[ 2.443290] i8042: PNP: PS/2 Controller [PNP0303:KBD,PNP0f0e:PS2M] at 0x60,0x64 irq 1,12
[ 2.576017] tsc: Refined TSC clocksource calibration: 2333.415 MHz
[ 2.582266] Switching to clocksource tsc
[ 2.646010] usb 2-2: new low-speed USB device number 2 using uhci_hcd
[ 2.703408] serio: i8042 KBD port at 0x60,0x64 irq 1
[ 2.708661] mousedev: PS/2 mouse device common for all mice
[ 2.714692] rtc_cmos 00:03: RTC can wake from S4
[ 2.719565] rtc_cmos 00:03: rtc core: registered rtc_cmos as rtc0
[ 2.725739] rtc_cmos 00:03: alarms up to one month, y3k, 114 bytes nvram, hpet irqs
[ 2.733627] md: linear personality registered for level -1
[ 2.739179] md: raid0 personality registered for level 0
[ 2.744548] md: raid1 personality registered for level 1
[ 2.749916] md: raid10 personality registered for level 10
[ 2.755458] md: raid6 personality registered for level 6
[ 2.760824] md: raid5 personality registered for level 5
[ 2.766192] md: raid4 personality registered for level 4
[ 2.771822] device-mapper: ioctl: 4.24.0-ioctl (2013-01-15) initialised: dm-devel at redhat.com
[ 2.780505] device-mapper: raid: Loading target version 1.4.2
[ 2.786410] device-mapper: cache-policy-mq: version 1.0.0 loaded
[ 2.792475] device-mapper: cache cleaner: version 1.0.0 loaded
[ 2.798363] cpuidle: using governor ladder
[ 2.802517] cpuidle: using governor menu
[ 2.806498] EFI Variables Facility v0.08 2004-May-17
[ 2.811651] hidraw: raw HID events driver (C) Jiri Kosina
[ 2.818589] usbcore: registered new interface driver usbhid
[ 2.824220] usbhid: USB HID core driver
[ 5.842007] hda-intel 0000:00:1b.0: azx_get_response timeout, switching to polling mode: last cmd=0x000f0000
[ 6.852006] hda-intel 0000:00:1b.0: No response from codec, disabling MSI: last cmd=0x000f0000
[ 7.225015] ata3.00: qc timeout (cmd 0xec)
[ 7.229177] ata3.00: failed to IDENTIFY (I/O error, err_mask=0x4)
[ 7.235334] ata4.00: qc timeout (cmd 0xec)
[ 7.239496] ata4.00: failed to IDENTIFY (I/O error, err_mask=0x4)
[ 7.245652] ata1.00: qc timeout (cmd 0xec)
[ 7.249813] ata1.00: failed to IDENTIFY (I/O error, err_mask=0x4)
[ 7.255970] ata2.00: qc timeout (cmd 0xa1)
[ 7.260136] ata2.00: failed to IDENTIFY (I/O error, err_mask=0x4)
[ 7.266300] ata6.00: qc timeout (cmd 0xec)
[ 7.270465] ata6.00: failed to IDENTIFY (I/O error, err_mask=0x4)
[ 7.558019] ata4: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
[ 7.570023] ata1: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
[ 7.582019] ata2: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
[ 7.588277] ata3: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
[ 7.594529] ata6: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
[ 7.861006] hda-intel 0000:00:1b.0: Codec #0 probe error; disabling it...
[ 8.873006] hda_intel: azx_get_response timeout, switching to single_cmd mode: last cmd=0x000f0000
[ 8.885125] hda_codec: ALC262: SKU not ready 0x411111f0
[ 8.902602] Netfilter messages via NETLINK v0.30.
[ 8.907378] nf_conntrack version 0.5.0 (16384 buckets, 65536 max)
[ 8.913711] ctnetlink v0.93: registering with nfnetlink.
[ 8.919199] ip_tables: (C) 2000-2006 Netfilter Core Team
[ 8.924605] TCP: cubic registered
[ 8.927982] Initializing XFRM netlink socket
[ 8.932728] NET: Registered protocol family 10
[ 8.937542] ip6_tables: (C) 2000-2006 Netfilter Core Team
[ 8.943061] sit: IPv6 over IPv4 tunneling driver
[ 8.948056] NET: Registered protocol family 17
[ 8.952588] Key type dns_resolver registered
[ 8.957700] Loading module verification certificates
[ 8.963791] MODSIGN: Loaded cert 'Magrathea: Glacier signing key: 0c33cdda5e831cd8c069c7b17dc72268cc6fc0e7'
[ 8.973628] registered taskstats version 1
[ 8.979508] Key type encrypted registered
[ 8.985276] IMA: No TPM chip found, activating TPM-bypass!
[ 8.993723] Magic number: 5:775:579
[ 8.997497] mem kmem: hash matches
[ 9.000970] pci_bus 0000:00: hash matches
[ 9.005070] console [netcon0] enabled
[ 9.008792] netconsole: network logging started
[ 9.098143] ALSA device list:
[ 9.101179] #0: HDA Intel at 0xf3300000 irq 65
[ 17.564011] ata4.00: qc timeout (cmd 0xec)
[ 17.568179] ata4.00: failed to IDENTIFY (I/O error, err_mask=0x4)
[ 17.574339] ata4: limiting SATA link speed to 1.5 Gbps
[ 17.579549] ata1.00: qc timeout (cmd 0xec)
[ 17.583716] ata1.00: failed to IDENTIFY (I/O error, err_mask=0x4)
[ 17.589864] ata1: limiting SATA link speed to 1.5 Gbps
[ 17.595070] ata2.00: qc timeout (cmd 0xa1)
[ 17.599231] ata2.00: failed to IDENTIFY (I/O error, err_mask=0x4)
[ 17.605379] ata2: limiting SATA link speed to 1.5 Gbps
[ 17.610593] ata6.00: qc timeout (cmd 0xec)
[ 17.614760] ata6.00: failed to IDENTIFY (I/O error, err_mask=0x4)
[ 17.620908] ata6: limiting SATA link speed to 1.5 Gbps
[ 17.626120] ata3.00: qc timeout (cmd 0xec)
[ 17.630280] ata3.00: failed to IDENTIFY (I/O error, err_mask=0x4)
[ 17.636427] ata3: limiting SATA link speed to 1.5 Gbps
[ 17.913016] ata4: SATA link up 1.5 Gbps (SStatus 113 SControl 310)
[ 17.919279] ata1: SATA link up 1.5 Gbps (SStatus 113 SControl 310)
[ 17.931019] ata2: SATA link up 1.5 Gbps (SStatus 113 SControl 310)
[ 17.943016] ata6: SATA link up 1.5 Gbps (SStatus 113 SControl 310)
[ 17.949275] ata3: SATA link up 1.5 Gbps (SStatus 113 SControl 310)
[ 47.919011] ata4.00: qc timeout (cmd 0xec)
[ 47.923177] ata4.00: failed to IDENTIFY (I/O error, err_mask=0x4)
[ 47.929338] ata1.00: qc timeout (cmd 0xec)
[ 47.933503] ata1.00: failed to IDENTIFY (I/O error, err_mask=0x4)
[ 47.939658] ata2.00: qc timeout (cmd 0xa1)
[ 47.943824] ata2.00: failed to IDENTIFY (I/O error, err_mask=0x4)
[ 47.949980] ata6.00: qc timeout (cmd 0xec)
[ 47.954159] ata6.00: failed to IDENTIFY (I/O error, err_mask=0x4)
[ 47.960318] ata3.00: qc timeout (cmd 0xec)
[ 47.964483] ata3.00: failed to IDENTIFY (I/O error, err_mask=0x4)
[ 48.242017] ata4: SATA link up 1.5 Gbps (SStatus 113 SControl 310)
[ 48.254021] ata1: SATA link up 1.5 Gbps (SStatus 113 SControl 310)
[ 48.266018] ata2: SATA link up 1.5 Gbps (SStatus 113 SControl 310)
[ 48.272272] ata6: SATA link up 1.5 Gbps (SStatus 113 SControl 310)
[ 48.278529] ata3: SATA link up 1.5 Gbps (SStatus 113 SControl 310)
[ 48.286162] Freeing unused kernel memory: 1160k freed
[ 48.291702] Write protecting the kernel read-only data: 14336k
[ 48.302132] Freeing unused kernel memory: 1456k freed
[ 48.309312] Freeing unused kernel memory: 504k freed
[ 48.345557] dracut: dracut-009-12.fc15
[ 48.360229] udev[1113]: starting version 167
[ 48.438175] dracut: Starting plymouth daemon
[ 48.468363] Floppy drive(s): fd0 is 1.44M
[ 51.488031] floppy0: no floppy controllers found
First kernel boot logs
=======================
[ 0.000000] Initializing cgroup subsys cpuset
[ 0.000000] Initializing cgroup subsys cpu
[ 0.000000] Linux version 3.9.0-rc1+ (<edited>) (gcc version 4.6.3 20120306 (Red Hat 4.6.3-2) (GCC) ) #168 SMP Fri Mar 8 11:26:01 EST 2013
[ 0.000000] Command line: ro root=UUID=90e92cac-8f9b-464d-9e00-11491cc4bf8e rd_NO_LUKS rd_NO_LVM rd_NO_MD rd_NO_DM LANG=en_US.UTF-8 SYSFONT=latarcyrheb-sun16 KEYTABLE=us console=tty0 console=ttyS0,115200n8 console=ttyS0,115200n8 selinux=0 crashkernel=128M at 64M
[ 0.000000] e820: BIOS-provided physical RAM map:
[ 0.000000] BIOS-e820: [mem 0x0000000000000000-0x0000000000096fff] usable
[ 0.000000] BIOS-e820: [mem 0x0000000000097000-0x000000000009ffff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000000e8000-0x00000000000fffff] reserved
[ 0.000000] BIOS-e820: [mem 0x0000000000100000-0x00000000bffc283f] usable
[ 0.000000] BIOS-e820: [mem 0x00000000bffc2840-0x00000000bfffffff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000e0000000-0x00000000efffffff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000fec00000-0x00000000ffffffff] reserved
[ 0.000000] BIOS-e820: [mem 0x0000000100000000-0x000000013fffffff] usable
[ 0.000000] NX (Execute Disable) protection: active
[ 0.000000] SMBIOS 2.5 present.
[ 0.000000] No AGP bridge found
[ 0.000000] e820: last_pfn = 0x140000 max_arch_pfn = 0x400000000
[ 0.000000] x86 PAT enabled: cpu 0, old 0x7040600070406, new 0x7010600070106
[ 0.000000] e820: last_pfn = 0xbffc2 max_arch_pfn = 0x400000000
[ 0.000000] found SMP MP-table at [mem 0x000fe700-0x000fe70f] mapped at [ffff8800000fe700]
[ 0.000000] Scanning 1 areas for low memory corruption
[ 0.000000] init_memory_mapping: [mem 0x00000000-0x000fffff]
[ 0.000000] init_memory_mapping: [mem 0x13fe00000-0x13fffffff]
[ 0.000000] init_memory_mapping: [mem 0x13c000000-0x13fdfffff]
[ 0.000000] init_memory_mapping: [mem 0x100000000-0x13bffffff]
[ 0.000000] init_memory_mapping: [mem 0x00100000-0xbffc1fff]
[ 0.000000] RAMDISK: [mem 0x37b7b000-0x37feffff]
[ 0.000000] Reserving 128MB of memory at 64MB for crashkernel (System RAM: 4095MB)
[ 0.000000] ACPI: RSDP 00000000000e9810 00024 (v02 HPQOEM)
[ 0.000000] ACPI: XSDT 00000000bffc52ec 0006C (v01 HPQOEM SLIC-WKS 20070918 00000000)
[ 0.000000] ACPI: FACP 00000000bffc5494 000F4 (v03 HPQOEM SEABURG 00000001 00000000)
[ 0.000000] ACPI BIOS Bug: Error: 32/64X address mismatch in FADT/Gpe0Block: 0x0000F828/0x000000000001F030, using 32 (20130117/tbfadt-462)
[ 0.000000] ACPI: DSDT 00000000bffc5a6e 02697 (v01 HPQOEM DSDT 00000001 MSFT 0100000E)
[ 0.000000] ACPI: FACS 00000000bffc5200 00040
[ 0.000000] ACPI: SSDT 00000000bffc8105 06A92 (v01 HPQOEM PROJECT 00000001 MSFT 0100000E)
[ 0.000000] ACPI: APIC 00000000bffc5588 000C8 (v01 HPQOEM SEABURG 00000001 00000000)
[ 0.000000] ACPI: ASF! 00000000bffc5650 0006A (v32 HPQOEM SEABURG 00000001 00000000)
[ 0.000000] ACPI: MCFG 00000000bffc5852 0003C (v01 HPQOEM SEABURG 00000001 00000000)
[ 0.000000] ACPI: SLIC 00000000bffc588e 00176 (v01 HPQOEM SLIC-WKS 00000001 00000000)
[ 0.000000] ACPI: HPET 00000000bffc5a04 00038 (v01 HPQOEM SEABURG 00000001 00000000)
[ 0.000000] ACPI: TCPA 00000000bffc5a3c 00032 (v01 HPQOEM SEABURG 00000001 00000000)
[ 0.000000] ACPI: DMAR 00000000bffc56ba 00108 (v01 HPQOEM SEABURG 00000001 00000000)
[ 0.000000] No NUMA configuration found
[ 0.000000] Faking a node at [mem 0x0000000000000000-0x000000013fffffff]
[ 0.000000] Initmem setup node 0 [mem 0x00000000-0x13fffffff]
[ 0.000000] NODE_DATA [mem 0x13fff9000-0x13fffcfff]
[ 0.000000] Zone ranges:
[ 0.000000] DMA [mem 0x00001000-0x00ffffff]
[ 0.000000] DMA32 [mem 0x01000000-0xffffffff]
[ 0.000000] Normal [mem 0x100000000-0x13fffffff]
[ 0.000000] Movable zone start for each node
[ 0.000000] Early memory node ranges
[ 0.000000] node 0: [mem 0x00001000-0x00096fff]
[ 0.000000] node 0: [mem 0x00100000-0xbffc1fff]
[ 0.000000] node 0: [mem 0x100000000-0x13fffffff]
[ 0.000000] ACPI: PM-Timer IO Port: 0xf808
[ 0.000000] ACPI: LAPIC (acpi_id[0x01] lapic_id[0x00] enabled)
[ 0.000000] ACPI: LAPIC (acpi_id[0x02] lapic_id[0x02] enabled)
[ 0.000000] ACPI: LAPIC (acpi_id[0x03] lapic_id[0x01] enabled)
[ 0.000000] ACPI: LAPIC (acpi_id[0x04] lapic_id[0x03] enabled)
[ 0.000000] ACPI: LAPIC (acpi_id[0x05] lapic_id[0x08] disabled)
[ 0.000000] ACPI: LAPIC (acpi_id[0x06] lapic_id[0x09] disabled)
[ 0.000000] ACPI: LAPIC (acpi_id[0x07] lapic_id[0x0a] disabled)
[ 0.000000] ACPI: LAPIC (acpi_id[0x08] lapic_id[0x0b] disabled)
[ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x01] high edge lint[0x1])
[ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x02] high edge lint[0x1])
[ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x03] high edge lint[0x1])
[ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x04] high edge lint[0x1])
[ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x05] high edge lint[0x1])
[ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x06] high edge lint[0x1])
[ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x07] high edge lint[0x1])
[ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x08] high edge lint[0x1])
[ 0.000000] ACPI: IOAPIC (id[0x01] address[0xfec00000] gsi_base[0])
[ 0.000000] IOAPIC[0]: apic_id 1, version 32, address 0xfec00000, GSI 0-23
[ 0.000000] ACPI: IOAPIC (id[0x02] address[0xfec89000] gsi_base[24])
[ 0.000000] IOAPIC[1]: apic_id 2, version 32, address 0xfec89000, GSI 24-47
[ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
[ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level)
[ 0.000000] Using ACPI (MADT) for SMP configuration information
[ 0.000000] ACPI: HPET id: 0x8086a201 base: 0xfed00000
[ 0.000000] smpboot: Allowing 8 CPUs, 4 hotplug CPUs
[ 0.000000] PM: Registered nosave memory: 0000000000097000 - 00000000000a0000
[ 0.000000] PM: Registered nosave memory: 00000000000a0000 - 00000000000e8000
[ 0.000000] PM: Registered nosave memory: 00000000000e8000 - 0000000000100000
[ 0.000000] PM: Registered nosave memory: 00000000bffc2000 - 00000000bffc3000
[ 0.000000] PM: Registered nosave memory: 00000000bffc3000 - 00000000c0000000
[ 0.000000] PM: Registered nosave memory: 00000000c0000000 - 00000000e0000000
[ 0.000000] PM: Registered nosave memory: 00000000e0000000 - 00000000f0000000
[ 0.000000] PM: Registered nosave memory: 00000000f0000000 - 00000000fec00000
[ 0.000000] PM: Registered nosave memory: 00000000fec00000 - 0000000100000000
[ 0.000000] e820: [mem 0xc0000000-0xdfffffff] available for PCI devices
[ 0.000000] setup_percpu: NR_CPUS:64 nr_cpumask_bits:64 nr_cpu_ids:8 nr_node_ids:1
[ 0.000000] PERCPU: Embedded 27 pages/cpu @ffff88013fc00000 s80000 r8192 d22400 u262144
[ 0.000000] Built 1 zonelists in Node order, mobility grouping on. Total pages: 1032002
[ 0.000000] Policy zone: Normal
[ 0.000000] Kernel command line: ro root=UUID=90e92cac-8f9b-464d-9e00-11491cc4bf8e rd_NO_LUKS rd_NO_LVM rd_NO_MD rd_NO_DM LANG=en_US.UTF-8 SYSFONT=latarcyrheb-sun16 KEYTABLE=us console=tty0 console=ttyS0,115200n8 console=ttyS0,115200n8 selinux=0 crashkernel=128M at 64M
[ 0.000000] PID hash table entries: 4096 (order: 3, 32768 bytes)
[ 0.000000] __ex_table already sorted, skipping sort
[ 0.000000] Checking aperture...
[ 0.000000] No AGP bridge found
[ 0.000000] Memory: 3907908k/5242880k available (8771k kernel code, 1049248k absent, 285724k reserved, 6390k data, 1160k init)
[ 0.000000] SLUB: Genslabs=15, HWalign=64, Order=0-3, MinObjects=0, CPUs=8, Nodes=1
[ 0.000000] Hierarchical RCU implementation.
[ 0.000000] RCU restricting CPUs from NR_CPUS=64 to nr_cpu_ids=8.
[ 0.000000] NR_IRQS:4352 nr_irqs:1152 16
[ 0.000000] Console: colour VGA+ 80x25
[ 0.000000] console [tty0] enabled
[ 0.000000] console [ttyS0] enabled
[ 0.000000] tsc: Fast TSC calibration using PIT
[ 0.000000] tsc: Detected 2333.444 MHz processor
[ 0.002004] Calibrating delay loop (skipped), value calculated using timer frequency.. 4666.88 BogoMIPS (lpj=2333444)
[ 0.004003] pid_max: default: 32768 minimum: 301
[ 0.005037] Security Framework initialized
[ 0.006007] SELinux: Disabled at boot.
[ 0.007306] Dentry cache hash table entries: 524288 (order: 10, 4194304 bytes)
[ 0.010580] Inode-cache hash table entries: 262144 (order: 9, 2097152 bytes)
[ 0.012523] Mount-cache hash table entries: 256
[ 0.013272] Initializing cgroup subsys cpuacct
[ 0.014004] Initializing cgroup subsys freezer
[ 0.015003] Initializing cgroup subsys blkio
[ 0.016041] CPU: Physical Processor ID: 0
[ 0.017002] CPU: Processor Core ID: 0
[ 0.018003] mce: CPU supports 6 MCE banks
[ 0.019009] CPU0: Thermal monitoring enabled (TM2)
[ 0.020008] Last level iTLB entries: 4KB 128, 2MB 4, 4MB 4
[ 0.020008] Last level dTLB entries: 4KB 256, 2MB 0, 4MB 32
[ 0.020008] tlb_flushall_shift: -1
[ 0.021106] Freeing SMP alternatives: 28k freed
[ 0.022017] ACPI: Core revision 20130117
[ 0.025989] ACPI: All ACPI Tables successfully acquired
[ 0.028007] ftrace: allocating 30474 entries in 120 pages
[ 0.037562] ..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1
[ 0.048659] smpboot: CPU0: Genuine Intel(R) CPU @ 2.33GHz (fam: 06, model: 17, stepping: 04)
[ 0.053000] Performance Events: PEBS fmt0+, 4-deep LBR, Core2 events, Intel PMU driver.
[ 0.057002] ... version: 2
[ 0.058001] ... bit width: 40
[ 0.059001] ... generic registers: 2
[ 0.060001] ... value mask: 000000ffffffffff
[ 0.061001] ... max period: 000000007fffffff
[ 0.062001] ... fixed-purpose events: 3
[ 0.063001] ... event mask: 0000000700000003
[ 0.065120] smpboot: Booting Node 0, Processors #1 #2 #3
[ 0.104014] Brought up 4 CPUs
[ 0.105002] smpboot: Total of 4 processors activated (18667.55 BogoMIPS)
[ 0.108341] EVM: security.selinux
[ 0.109008] EVM: security.ima
[ 0.110003] EVM: security.capability
[ 0.111316] xor: measuring software checksum speed
[ 0.122002] prefetch64-sse: 10028.000 MB/sec
[ 0.133002] generic_sse: 8864.000 MB/sec
[ 0.134001] xor: using function: prefetch64-sse (10028.000 MB/sec)
[ 0.135021] RTC time: 12:05:42, date: 03/08/13
[ 0.136061] NET: Registered protocol family 16
[ 0.138111] ACPI: bus type PCI registered
[ 0.139031] PCI: MMCONFIG for domain 0000 [bus 00-ff] at [mem 0xe0000000-0xefffffff] (base 0xe0000000)
[ 0.140007] PCI: MMCONFIG at [mem 0xe0000000-0xefffffff] reserved in E820
[ 0.157009] PCI: Using configuration type 1 for base access
[ 0.174040] bio: create slab <bio-0> at 0
[ 0.194294] raid6: sse2x1 3265 MB/s
[ 0.214301] raid6: sse2x2 5906 MB/s
[ 0.234300] raid6: sse2x4 6492 MB/s
[ 0.238002] raid6: using algorithm sse2x4 (6492 MB/s)
[ 0.243002] raid6: using ssse3x2 recovery algorithm
[ 0.248018] ACPI: Added _OSI(Module Device)
[ 0.253003] ACPI: Added _OSI(Processor Device)
[ 0.257002] ACPI: Added _OSI(3.0 _SCP Extensions)
[ 0.262002] ACPI: Added _OSI(Processor Aggregator Device)
[ 0.280016] ACPI: SSDT 00000000bffd07c1 008C4 (v01 HPQOEM CPU_TM2 00000001 MSFT 0100000E)
[ 0.288577] ACPI: Dynamic OEM Table Load:
[ 0.293254] ACPI: SSDT (null) 008C4 (v01 HPQOEM CPU_TM2 00000001 MSFT 0100000E)
[ 0.307302] ACPI: Interpreter enabled
[ 0.311007] ACPI Exception: AE_NOT_FOUND, While evaluating Sleep State [\_S1_] (20130117/hwxface-568)
[ 0.321002] ACPI Exception: AE_NOT_FOUND, While evaluating Sleep State [\_S2_] (20130117/hwxface-568)
[ 0.330010] ACPI: (supports S0 S3 S4 S5)
[ 0.334002] ACPI: Using IOAPIC for interrupt routing
[ 0.339026] PCI: Ignoring host bridge windows from ACPI; if necessary, use "pci=use_crs" and report a bug
[ 0.365037] ACPI: PCI Root Bridge [PCI0] (domain 0000 [bus 00-ff])
[ 0.371050] ACPI Error: [CAPD] Namespace lookup failure, AE_ALREADY_EXISTS (20130117/dsfield-211)
[ 0.381002] ACPI Error: Method parse/execution failed [\_SB_.PCI0._OSC] (Node ffff88013aa61c30), AE_ALREADY_EXISTS (20130117/psparse-537)
[ 0.393003] ACPI: Marking method _OSC as Serialized because of AE_ALREADY_EXISTS error
[ 0.401045] ACPI Error: [CAPD] Namespace lookup failure, AE_ALREADY_EXISTS (20130117/dsfield-211)
[ 0.410002] ACPI Error: Method parse/execution failed [\_SB_.PCI0._OSC] (Node ffff88013aa61c30), AE_ALREADY_EXISTS (20130117/psparse-537)
[ 0.423006] acpi PNP0A08:00: ACPI _OSC support notification failed, disabling PCIe ASPM
[ 0.431002] acpi PNP0A08:00: Unable to request _OSC control (_OSC support mask: 0x08)
[ 0.439135] PCI host bridge to bus 0000:00
[ 0.443005] pci_bus 0000:00: root bus resource [bus 00-ff]
[ 0.449003] pci_bus 0000:00: root bus resource [io 0x0000-0xffff]
[ 0.455002] pci_bus 0000:00: root bus resource [mem 0x00000000-0x3fffffffff]
[ 0.462144] pci 0000:00:01.0: System wakeup disabled by ACPI
[ 0.468096] pci 0000:00:05.0: System wakeup disabled by ACPI
[ 0.474098] pci 0000:00:09.0: System wakeup disabled by ACPI
[ 0.482195] pci 0000:00:1c.0: System wakeup disabled by ACPI
[ 0.488116] pci 0000:00:1d.0: System wakeup disabled by ACPI
[ 0.494113] pci 0000:00:1d.1: System wakeup disabled by ACPI
[ 0.499116] pci 0000:00:1d.2: System wakeup disabled by ACPI
[ 0.505112] pci 0000:00:1d.3: System wakeup disabled by ACPI
[ 0.511173] pci 0000:00:1d.7: System wakeup disabled by ACPI
[ 0.517091] pci 0000:00:1e.0: System wakeup disabled by ACPI
[ 0.524065] pci 0000:00:01.0: PCI bridge to [bus 80]
[ 0.529135] pci 0000:60:00.0: System wakeup disabled by ACPI
[ 0.537013] pci 0000:00:05.0: PCI bridge to [bus 60]
[ 0.553008] pci 0000:00:09.0: PCI bridge to [bus 10-40]
[ 0.563972] pci 0000:1e:00.0: System wakeup disabled by ACPI
[ 0.574013] pci 0000:1e:01.0: System wakeup disabled by ACPI
[ 0.581138] pci 0000:10:00.0: PCI bridge to [bus 1e-40]
[ 0.589039] pci 0000:1e:00.0: PCI bridge to [bus 20]
[ 0.600285] pci 0000:40:00.0: System wakeup disabled by ACPI
[ 0.606287] pci 0000:1e:01.0: PCI bridge to [bus 40]
[ 0.615184] pci 0000:10:00.3: PCI bridge to [bus 11-1d]
[ 0.622252] pci 0000:0e:00.0: System wakeup disabled by ACPI
[ 0.630015] pci 0000:00:1c.0: PCI bridge to [bus 0e]
[ 0.635048] pci 0000:00:1e.0: PCI bridge to [bus 01] (subtractive decode)
[ 0.642032] ACPI _OSC control for PCIe not granted, disabling ASPM
[ 0.648323] ACPI: PCI Interrupt Link [LNKA] (IRQs *3 4 5 6 7 10 11 14 15)
[ 0.655740] ACPI: PCI Interrupt Link [LNKB] (IRQs 3 4 *5 6 7 10 11 14 15)
[ 0.663307] ACPI: PCI Interrupt Link [LNKC] (IRQs 3 4 5 6 *7 10 11 14 15)
[ 0.670436] ACPI: PCI Interrupt Link [LNKD] (IRQs 3 4 *5 6 7 10 11 14 15)
[ 0.678054] ACPI: PCI Interrupt Link [LNKE] (IRQs 3 4 5 6 7 10 11 14 15) *0, disabled.
[ 0.687307] ACPI: PCI Interrupt Link [LNKF] (IRQs *3 4 5 6 7 10 11 14 15)
[ 0.694038] ACPI: PCI Interrupt Link [LNKG] (IRQs 3 4 5 6 7 *10 11 14 15)
[ 0.701306] ACPI: PCI Interrupt Link [LNKH] (IRQs 3 4 5 6 7 10 11 14 15) *0, disabled.
[ 0.711086] ACPI: No dock devices found.
[ 0.715030] vgaarb: device added: PCI:0000:60:00.0,decodes=io+mem,owns=io+mem,locks=none
[ 0.723006] vgaarb: loaded
[ 0.726002] vgaarb: bridge control possible 0000:60:00.0
[ 0.731071] SCSI subsystem initialized
[ 0.735004] ACPI: bus type ATA registered
[ 0.739034] ACPI: bus type USB registered
[ 0.744031] usbcore: registered new interface driver usbfs
[ 0.749022] usbcore: registered new interface driver hub
[ 0.755017] usbcore: registered new device driver usb
[ 0.760031] pps_core: LinuxPPS API ver. 1 registered
[ 0.765002] pps_core: Software ver. 5.3.6 - Copyright 2005-2007 Rodolfo Giometti <giometti at linux.it>
[ 0.774017] PTP clock support registered
[ 0.779019] Advanced Linux Sound Architecture Driver Initialized.
[ 0.785003] PCI: Using ACPI for IRQ routing
[ 0.837065] cfg80211: Calling CRDA to update world regulatory domain
[ 0.838144] NetLabel: Initializing
[ 0.838146] NetLabel: domain hash size = 128
[ 0.838146] NetLabel: protocols = UNLABELED CIPSOv4
[ 0.838199] NetLabel: unlabeled traffic allowed by default
[ 0.838233] HPET: 3 timers in total, 0 timers will be used for per-cpu timer
[ 0.838233] hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0
[ 0.838233] hpet0: 3 comparators, 64-bit 14.318180 MHz counter
[ 0.880062] Switching to clocksource hpet
[ 0.891484] pnp: PnP ACPI init
[ 0.894615] ACPI: bus type PNP registered
[ 0.900401] system 00:0b: [io 0x04d0-0x04d1] has been reserved
[ 0.906523] system 00:0c: [io 0x0400-0x041f] has been reserved
[ 0.912506] system 00:0c: [io 0x0420-0x043f] has been reserved
[ 0.918486] system 00:0c: [io 0x0440-0x045f] has been reserved
[ 0.924466] system 00:0c: [io 0x0460-0x047f] has been reserved
[ 0.930444] system 00:0c: [io 0x0480-0x048f] has been reserved
[ 0.936424] system 00:0c: [io 0x0490-0x049f] has been reserved
[ 0.942404] system 00:0c: [io 0xf800-0xf81f] has been reserved
[ 0.948383] system 00:0c: [io 0xf820-0xf83f] has been reserved
[ 0.954361] system 00:0c: [io 0xf840-0xf85f] has been reserved
[ 0.960341] system 00:0c: [io 0xf860-0xf87f] has been reserved
[ 0.966321] system 00:0c: [io 0xfa00-0xfa3f] has been reserved
[ 0.972301] system 00:0c: [io 0xfc00-0xfc7f] has been reserved
[ 0.978282] system 00:0c: [io 0xfc80-0xfcff] has been reserved
[ 0.984259] system 00:0c: [io 0xfe00-0xfe7f] has been reserved
[ 0.990239] system 00:0c: [io 0xfe80-0xfeff] has been reserved
[ 0.996323] system 00:0d: [mem 0xfed1c000-0xfed1ffff] has been reserved
[ 1.002996] system 00:0d: [mem 0xffe00000-0xffffffff] has been reserved
[ 1.009670] system 00:0d: [mem 0xfee00000-0xfeefffff] has been reserved
[ 1.016343] system 00:0d: [mem 0xfe700000-0xfe7003ff] has been reserved
[ 1.023014] system 00:0d: [mem 0xfe600000-0xfe6fffff] has been reserved
[ 1.029687] system 00:0d: [mem 0xfe000000-0xfe01ffff] has been reserved
[ 1.036636] system 00:0e: [mem 0x00000000-0x0009ffff] could not be reserved
[ 1.043657] system 00:0e: [mem 0x000c0000-0x000e7fff] could not be reserved
[ 1.050677] system 00:0e: [mem 0x000e8000-0x000effff] could not be reserved
[ 1.057695] system 00:0e: [mem 0x000f0000-0x000fffff] could not be reserved
[ 1.064714] system 00:0e: [mem 0x00100000-0xbfffffff] could not be reserved
[ 1.071733] system 00:0e: [mem 0xfeda0000-0xfedbffff] has been reserved
[ 1.078538] system 00:0f: [mem 0xe0000000-0xefffffff] has been reserved
[ 1.085235] pnp: PnP ACPI: found 16 devices
[ 1.089480] ACPI: bus type PNP unregistered
[ 1.105073] pci 0000:00:09.0: BAR 15: assigned [mem 0xf3400000-0xf34fffff pref]
[ 1.112477] pci 0000:00:1c.0: BAR 15: assigned [mem 0xf3500000-0xf36fffff 64bit pref]
[ 1.120399] pci 0000:00:1c.0: BAR 13: assigned [io 0x4000-0x4fff]
[ 1.126638] pci 0000:00:01.0: PCI bridge to [bus 80]
[ 1.131673] pci 0000:60:00.0: BAR 6: can't assign mem pref (size 0x20000)
[ 1.138520] pci 0000:00:05.0: PCI bridge to [bus 60]
[ 1.143546] pci 0000:00:05.0: bridge window [io 0x1000-0x1fff]
[ 1.149701] pci 0000:00:05.0: bridge window [mem 0xf0000000-0xf2ffffff]
[ 1.156548] pci 0000:00:05.0: bridge window [mem 0xc0000000-0xdfffffff 64bit pref]
[ 1.164388] pci 0000:10:00.0: BAR 15: assigned [mem 0xf3400000-0xf34fffff pref]
[ 1.171790] pci 0000:1e:01.0: BAR 15: assigned [mem 0xf3400000-0xf34fffff pref]
[ 1.179201] pci 0000:1e:00.0: PCI bridge to [bus 20]
[ 1.184599] pci 0000:40:00.0: BAR 6: assigned [mem 0xf3400000-0xf347ffff pref]
[ 1.191916] pci 0000:1e:01.0: PCI bridge to [bus 40]
[ 1.196942] pci 0000:1e:01.0: bridge window [io 0x2000-0x2fff]
[ 1.203188] pci 0000:1e:01.0: bridge window [mem 0xf3100000-0xf31fffff]
[ 1.210080] pci 0000:1e:01.0: bridge window [mem 0xf3400000-0xf34fffff pref]
[ 1.217538] pci 0000:10:00.0: PCI bridge to [bus 1e-40]
[ 1.222825] pci 0000:10:00.0: bridge window [io 0x2000-0x2fff]
[ 1.229068] pci 0000:10:00.0: bridge window [mem 0xf3100000-0xf31fffff]
[ 1.235960] pci 0000:10:00.0: bridge window [mem 0xf3400000-0xf34fffff pref]
[ 1.243414] pci 0000:10:00.3: PCI bridge to [bus 11-1d]
[ 1.249071] pci 0000:00:09.0: PCI bridge to [bus 10-40]
[ 1.254357] pci 0000:00:09.0: bridge window [io 0x2000-0x2fff]
[ 1.260512] pci 0000:00:09.0: bridge window [mem 0xf3100000-0xf32fffff]
[ 1.267358] pci 0000:00:09.0: bridge window [mem 0xf3400000-0xf34fffff pref]
[ 1.275456] pci 0000:00:1c.0: PCI bridge to [bus 0e]
[ 1.280481] pci 0000:00:1c.0: bridge window [io 0x4000-0x4fff]
[ 1.286635] pci 0000:00:1c.0: bridge window [mem 0xf3000000-0xf30fffff]
[ 1.293480] pci 0000:00:1c.0: bridge window [mem 0xf3500000-0xf36fffff 64bit pref]
[ 1.301319] pci 0000:00:1e.0: PCI bridge to [bus 01]
[ 1.307684] NET: Registered protocol family 2
[ 1.312343] TCP established hash table entries: 32768 (order: 7, 524288 bytes)
[ 1.319981] TCP bind hash table entries: 32768 (order: 8, 1048576 bytes)
[ 1.327193] TCP: Hash tables configured (established 32768 bind 32768)
[ 1.333823] TCP: reno registered
[ 1.337140] UDP hash table entries: 2048 (order: 5, 196608 bytes)
[ 1.343397] UDP-Lite hash table entries: 2048 (order: 5, 196608 bytes)
[ 1.350165] NET: Registered protocol family 1
[ 1.354675] RPC: Registered named UNIX socket transport module.
[ 1.360658] RPC: Registered udp transport module.
[ 1.365424] RPC: Registered tcp transport module.
[ 1.370198] RPC: Registered tcp NFSv4.1 backchannel transport module.
[ 1.378249] pci 0000:00:1f.0: rerouting interrupts for [8086:2670]
[ 1.384770] Trying to unpack rootfs image as initramfs...
[ 1.488303] Freeing initrd memory: 4564k freed
[ 1.494472] dmar: Host address width 36
[ 1.498377] dmar: DRHD base: 0x000000fe710000 flags: 0x0
[ 1.503771] dmar: IOMMU 0: reg_base_addr fe710000 ver 1:0 cap 900800c2f0462 ecap e01
[ 1.511610] dmar: DRHD base: 0x000000fe714000 flags: 0x0
[ 1.516989] dmar: IOMMU 1: reg_base_addr fe714000 ver 1:0 cap 900800c2f0462 ecap e01
[ 1.524825] dmar: DRHD base: 0x000000fe719000 flags: 0x0
[ 1.530203] dmar: IOMMU 2: reg_base_addr fe719000 ver 1:0 cap 900800c2f0462 ecap e01
[ 1.538041] dmar: DRHD base: 0x000000fe718000 flags: 0x1
[ 1.543416] dmar: IOMMU 3: reg_base_addr fe718000 ver 1:0 cap 900800c2f0462 ecap e01
[ 1.551253] dmar: RMRR base: 0x000000bffd3000 end: 0x000000bffd3fff
[ 1.557581] dmar: RMRR base: 0x000000bffd4000 end: 0x000000bffd4fff
[ 1.563906] dmar: RMRR base: 0x000000bffd5000 end: 0x000000bffd5fff
[ 1.570239] dmar: RMRR base: 0x000000bffd6000 end: 0x000000bffd6fff
[ 1.576573] PCI-DMA: Using software bounce buffering for IO (SWIOTLB)
[ 1.583073] software IO TLB [mem 0xbbfc2000-0xbffc2000] (64MB) mapped at [ffff8800bbfc2000-ffff8800bffc1fff]
[ 1.594127] microcode: CPU0 sig=0x10674, pf=0x40, revision=0x404
[ 1.600197] microcode: CPU1 sig=0x10674, pf=0x40, revision=0x404
[ 1.606273] microcode: CPU2 sig=0x10674, pf=0x40, revision=0x404
[ 1.612346] microcode: CPU3 sig=0x10674, pf=0x40, revision=0x404
[ 1.618480] microcode: Microcode Update Driver: v2.00 <tigran at aivazian.fsnet.co.uk>, Peter Oruba
[ 1.627356] Scanning for low memory corruption every 60 seconds
[ 1.633766] Initialise module verification
[ 1.637995] audit: initializing netlink socket (disabled)
[ 1.643474] type=2000 audit(1362744342.642:1): initialized
[ 1.685785] HugeTLB registered 2 MB page size, pre-allocated 0 pages
[ 1.697995] VFS: Disk quotas dquot_6.5.2
[ 1.702102] Dquot-cache hash table entries: 512 (order 0, 4096 bytes)
[ 1.710463] NFS: Registering the id_resolver key type
[ 1.715587] Key type id_resolver registered
[ 1.719834] Key type id_legacy registered
[ 1.723987] msgmni has been set to 7641
[ 1.728562] Key type asymmetric registered
[ 1.732724] Asymmetric key parser 'x509' registered
[ 1.737815] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 251)
[ 1.745346] io scheduler noop registered
[ 1.749332] io scheduler deadline registered
[ 1.753748] io scheduler cfq registered (default)
[ 1.762984] pci_hotplug: PCI Hot Plug PCI Core version: 0.5
[ 1.768949] input: Power Button as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0C:00/input/input0
[ 1.777396] ACPI: Power Button [PBTN]
[ 1.781217] input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input1
[ 1.788708] ACPI: Power Button [PWRF]
[ 1.792738] ACPI: Requesting acpi_cpufreq
[ 1.799941] Serial: 8250/16550 driver, 4 ports, IRQ sharing enabled
[ 1.826858] 00:07: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
[ 1.833459] Non-volatile memory driver v1.3
[ 1.837780] Linux agpgart interface v0.103
[ 1.842296] [drm] Initialized drm 1.1.0 20060810
[ 1.850225] brd: module loaded
[ 1.855038] loop: module loaded
[ 1.858926] ahci 0000:00:1f.2: AHCI 0001.0100 32 slots 6 ports 3 Gbps 0x3f impl RAID mode
[ 1.867199] ahci 0000:00:1f.2: flags: 64bit ncq pm led slum part
[ 1.875136] scsi0 : ahci
[ 1.877936] scsi1 : ahci
[ 1.880722] scsi2 : ahci
[ 1.883506] scsi3 : ahci
[ 1.886289] scsi4 : ahci
[ 1.889088] scsi5 : ahci
[ 1.891835] ata1: SATA max UDMA/133 abar m1024 at 0xf3304400 port 0xf3304500 irq 19
[ 1.899332] ata2: SATA max UDMA/133 abar m1024 at 0xf3304400 port 0xf3304580 irq 19
[ 1.906822] ata3: SATA max UDMA/133 abar m1024 at 0xf3304400 port 0xf3304600 irq 19
[ 1.914311] ata4: SATA max UDMA/133 abar m1024 at 0xf3304400 port 0xf3304680 irq 19
[ 1.921800] ata5: SATA max UDMA/133 abar m1024 at 0xf3304400 port 0xf3304700 irq 19
[ 1.929289] ata6: SATA max UDMA/133 abar m1024 at 0xf3304400 port 0xf3304780 irq 19
[ 1.937966] scsi6 : ata_piix
[ 1.941104] scsi7 : ata_piix
[ 1.944181] ata7: PATA max UDMA/100 cmd 0x1f0 ctl 0x3f6 bmdma 0x30c0 irq 14
[ 1.951211] ata8: PATA max UDMA/100 cmd 0x170 ctl 0x376 bmdma 0x30c8 irq 15
[ 1.958744] tg3.c:v3.130 (February 14, 2013)
[ 1.974267] tg3 0000:0e:00.0 eth0: Tigon3 [partno(BCM95755) rev a002] (PCI Express) MAC address 00:19:bb:ea:3c:7d
[ 1.984617] tg3 0000:0e:00.0 eth0: attached PHY is 5755 (10/100/1000Base-T Ethernet) (WireSpeed[1], EEE[0])
[ 1.994444] tg3 0000:0e:00.0 eth0: RXcsums[1] LinkChgREG[0] MIirq[0] ASF[0] TSOcap[1]
[ 2.002365] tg3 0000:0e:00.0 eth0: dma_rwctrl[76180000] dma_mask[64-bit]
[ 2.009235] e100: Intel(R) PRO/100 Network Driver, 3.5.24-k2-NAPI
[ 2.015388] e100: Copyright(c) 1999-2006 Intel Corporation
[ 2.021010] e1000: Intel(R) PRO/1000 Network Driver - version 7.3.21-k8-NAPI
[ 2.028114] e1000: Copyright (c) 1999-2006 Intel Corporation.
[ 2.033988] sky2: driver version 1.30
[ 2.038174] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
[ 2.044770] ehci-pci: EHCI PCI platform driver
[ 2.049448] ehci-pci 0000:00:1d.7: EHCI Host Controller
[ 2.054819] ehci-pci 0000:00:1d.7: new USB bus registered, assigned bus number 1
[ 2.062320] ehci-pci 0000:00:1d.7: debug port 1
[ 2.070870] ehci-pci 0000:00:1d.7: irq 16, io mem 0xf3304000
[ 2.082016] ehci-pci 0000:00:1d.7: USB 2.0 started, EHCI 1.00
[ 2.087886] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002
[ 2.094733] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 2.102050] usb usb1: Product: EHCI Host Controller
[ 2.106991] usb usb1: Manufacturer: Linux 3.9.0-rc1+ ehci_hcd
[ 2.112797] usb usb1: SerialNumber: 0000:00:1d.7
[ 2.117684] hub 1-0:1.0: USB hub found
[ 2.121512] hub 1-0:1.0: 8 ports detected
[ 2.125775] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver
[ 2.132089] uhci_hcd: USB Universal Host Controller Interface driver
[ 2.138665] uhci_hcd 0000:00:1d.0: UHCI Host Controller
[ 2.144046] uhci_hcd 0000:00:1d.0: new USB bus registered, assigned bus number 2
[ 2.151541] uhci_hcd 0000:00:1d.0: detected 2 ports
[ 2.156505] uhci_hcd 0000:00:1d.0: irq 16, io base 0x00003000
[ 2.162353] usb usb2: New USB device found, idVendor=1d6b, idProduct=0001
[ 2.169210] usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 2.176525] usb usb2: Product: UHCI Host Controller
[ 2.181463] usb usb2: Manufacturer: Linux 3.9.0-rc1+ uhci_hcd
[ 2.187267] usb usb2: SerialNumber: 0000:00:1d.0
[ 2.192141] hub 2-0:1.0: USB hub found
[ 2.195963] hub 2-0:1.0: 2 ports detected
[ 2.200259] uhci_hcd 0000:00:1d.1: UHCI Host Controller
[ 2.205638] uhci_hcd 0000:00:1d.1: new USB bus registered, assigned bus number 3
[ 2.213139] uhci_hcd 0000:00:1d.1: detected 2 ports
[ 2.218103] uhci_hcd 0000:00:1d.1: irq 19, io base 0x00003020
[ 2.223961] usb usb3: New USB device found, idVendor=1d6b, idProduct=0001
[ 2.230811] usb usb3: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 2.238127] usb usb3: Product: UHCI Host Controller
[ 2.241037] ata3: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
[ 2.241062] ata5: SATA link down (SStatus 0 SControl 300)
[ 2.241089] ata2: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
[ 2.241110] ata1: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
[ 2.241141] ata4: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
[ 2.241162] ata6: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
[ 2.241345] ata4.00: ATA-7: INTEL SSDSA2MH080G1GN, 045C8820, max UDMA/133
[ 2.241347] ata4.00: 156301488 sectors, multi 1: LBA48 NCQ (depth 31)
[ 2.293033] usb usb3: Manufacturer: Linux 3.9.0-rc1+ uhci_hcd
[ 2.293046] ata2.00: ATAPI: HL-DT-STDVD-ROM GDRH10N, D70D, max UDMA/100
[ 2.293090] ata4.00: configured for UDMA/133
[ 2.293164] ata3.00: ATA-8: WDC SSC-D0064SC-2100, 5.12, max UDMA/133
[ 2.293166] ata3.00: 125045424 sectors, multi 16: LBA48 NCQ (depth 31/32), AA
[ 2.323437] ata1.00: ATA-7: Hitachi HDS721680PLA380, P21OAB6A, max UDMA/100
[ 2.323439] usb usb3: SerialNumber: 0000:00:1d.1
[ 2.326166] hub 3-0:1.0: USB hub found
[ 2.326171] hub 3-0:1.0: 2 ports detected
[ 2.326392] uhci_hcd 0000:00:1d.2: UHCI Host Controller
[ 2.326455] uhci_hcd 0000:00:1d.2: new USB bus registered, assigned bus number 4
[ 2.326463] uhci_hcd 0000:00:1d.2: detected 2 ports
[ 2.326501] uhci_hcd 0000:00:1d.2: irq 18, io base 0x00003040
[ 2.326544] usb usb4: New USB device found, idVendor=1d6b, idProduct=0001
[ 2.326546] usb usb4: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 2.326548] usb usb4: Product: UHCI Host Controller
[ 2.326550] usb usb4: Manufacturer: Linux 3.9.0-rc1+ uhci_hcd
[ 2.326551] usb usb4: SerialNumber: 0000:00:1d.2
[ 2.326698] hub 4-0:1.0: USB hub found
[ 2.326702] hub 4-0:1.0: 2 ports detected
[ 2.326921] uhci_hcd 0000:00:1d.3: UHCI Host Controller
[ 2.326985] uhci_hcd 0000:00:1d.3: new USB bus registered, assigned bus number 5
[ 2.326993] uhci_hcd 0000:00:1d.3: detected 2 ports
[ 2.327040] uhci_hcd 0000:00:1d.3: irq 22, io base 0x00003060
[ 2.327085] usb usb5: New USB device found, idVendor=1d6b, idProduct=0001
[ 2.327087] usb usb5: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 2.327088] usb usb5: Product: UHCI Host Controller
[ 2.327090] usb usb5: Manufacturer: Linux 3.9.0-rc1+ uhci_hcd
[ 2.327092] usb usb5: SerialNumber: 0000:00:1d.3
[ 2.327248] hub 5-0:1.0: USB hub found
[ 2.327252] hub 5-0:1.0: 2 ports detected
[ 2.327425] usbcore: registered new interface driver usblp
[ 2.327426] Initializing USB Mass Storage driver...
[ 2.327485] usbcore: registered new interface driver usb-storage
[ 2.327485] USB Mass Storage support registered.
[ 2.327607] i8042: PNP: PS/2 Controller [PNP0303:KBD,PNP0f0e:PS2M] at 0x60,0x64 irq 1,12
[ 2.494978] ata1.00: 156301488 sectors, multi 0: LBA48 NCQ (depth 31/32), AA
[ 2.496040] serio: i8042 KBD port at 0x60,0x64 irq 1
[ 2.496046] serio: i8042 AUX port at 0x60,0x64 irq 12
[ 2.496163] mousedev: PS/2 mouse device common for all mice
[ 2.496452] rtc_cmos 00:03: RTC can wake from S4
[ 2.496633] rtc_cmos 00:03: rtc core: registered rtc_cmos as rtc0
[ 2.496666] rtc_cmos 00:03: alarms up to one month, y3k, 114 bytes nvram, hpet irqs
[ 2.496772] md: linear personality registered for level -1
[ 2.496773] md: raid0 personality registered for level 0
[ 2.496774] md: raid1 personality registered for level 1
[ 2.496776] md: raid10 personality registered for level 10
[ 2.496776] md: raid6 personality registered for level 6
[ 2.496777] md: raid5 personality registered for level 5
[ 2.496778] md: raid4 personality registered for level 4
[ 2.496997] device-mapper: ioctl: 4.24.0-ioctl (2013-01-15) initialised: dm-devel at redhat.com
[ 2.497123] device-mapper: raid: Loading target version 1.4.2
[ 2.497200] device-mapper: cache-policy-mq: version 1.0.0 loaded
[ 2.497201] device-mapper: cache cleaner: version 1.0.0 loaded
[ 2.497206] cpuidle: using governor ladder
[ 2.497207] cpuidle: using governor menu
[ 2.497208] EFI Variables Facility v0.08 2004-May-17
[ 2.497309] hidraw: raw HID events driver (C) Jiri Kosina
[ 2.498363] usbcore: registered new interface driver usbhid
[ 2.498364] usbhid: USB HID core driver
[ 2.596019] tsc: Refined TSC clocksource calibration: 2333.415 MHz
[ 2.596023] Switching to clocksource tsc
[ 2.638906] ata6.00: ATA-8: WDC WD30EZRS-00J99B0, 80.00A80, max UDMA/133
[ 2.645669] ata6.00: 5860533168 sectors, multi 0: LBA48 NCQ (depth 31/32), AA
[ 2.652890] ata2.00: configured for UDMA/100
[ 2.657330] ata3.00: configured for UDMA/133
[ 2.661686] ata1.00: configured for UDMA/100
[ 2.666096] ata6.00: configured for UDMA/133
[ 2.666184] scsi 0:0:0:0: Direct-Access ATA Hitachi HDS72168 P21O PQ: 0 ANSI: 5
[ 2.666514] sd 0:0:0:0: [sda] 156301488 512-byte logical blocks: (80.0 GB/74.5 GiB)
[ 2.666575] sd 0:0:0:0: [sda] Write Protect is off
[ 2.666581] sd 0:0:0:0: Attached scsi generic sg0 type 0
[ 2.666605] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[ 2.689011] usb 2-2: new low-speed USB device number 2 using uhci_hcd
[ 2.700212] sda: sda1 sda2 sda3
[ 2.700648] sd 0:0:0:0: [sda] Attached SCSI disk
[ 2.724733] scsi 1:0:0:0: CD-ROM HL-DT-ST DVD-ROM GDRH10N D70D PQ: 0 ANSI: 5
[ 2.733095] hda_codec: ALC262: SKU not ready 0x411111f0
[ 2.741643] sr0: scsi3-mmc drive: 48x/48x cd/rw xa/form2 cdda tray
[ 2.747887] cdrom: Uniform CD-ROM driver Revision: 3.20
[ 2.753422] sr 1:0:0:0: Attached scsi generic sg1 type 5
[ 2.758971] scsi 2:0:0:0: Direct-Access ATA WDC SSC-D0064SC- 5.12 PQ: 0 ANSI: 5
[ 2.767345] sd 2:0:0:0: [sdb] 125045424 512-byte logical blocks: (64.0 GB/59.6 GiB)
[ 2.767427] sd 2:0:0:0: Attached scsi generic sg2 type 0
[ 2.767587] scsi 3:0:0:0: Direct-Access ATA INTEL SSDSA2MH08 045C PQ: 0 ANSI: 5
[ 2.767834] sd 3:0:0:0: [sdc] 156301488 512-byte logical blocks: (80.0 GB/74.5 GiB)
[ 2.767880] sd 3:0:0:0: [sdc] Write Protect is off
[ 2.767902] sd 3:0:0:0: [sdc] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[ 2.768035] sd 3:0:0:0: Attached scsi generic sg3 type 0
[ 2.768542] sdc: unknown partition table
[ 2.777131] scsi 5:0:0:0: Direct-Access ATA WDC WD30EZRS-00J 80.0 PQ: 0 ANSI: 5
[ 2.777188] sd 3:0:0:0: [sdc] Attached SCSI disk
[ 2.777355] sd 5:0:0:0: [sdd] 5860533168 512-byte logical blocks: (3.00 TB/2.72 TiB)
[ 2.777356] sd 5:0:0:0: [sdd] 4096-byte physical blocks
[ 2.777402] sd 5:0:0:0: [sdd] Write Protect is off
[ 2.777422] sd 5:0:0:0: Attached scsi generic sg4 type 0
[ 2.777426] sd 5:0:0:0: [sdd] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[ 2.865121] sd 2:0:0:0: [sdb] Write Protect is off
[ 2.870000] sd 2:0:0:0: [sdb] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[ 2.879855] sdb: unknown partition table
[ 2.884168] sd 2:0:0:0: [sdb] Attached SCSI disk
[ 2.893513] Netfilter messages via NETLINK v0.30.
[ 2.898322] nf_conntrack version 0.5.0 (16384 buckets, 65536 max)
[ 2.904652] ctnetlink v0.93: registering with nfnetlink.
[ 2.910159] ip_tables: (C) 2000-2006 Netfilter Core Team
[ 2.915563] TCP: cubic registered
[ 2.918941] Initializing XFRM netlink socket
[ 2.923659] NET: Registered protocol family 10
[ 2.928506] ip6_tables: (C) 2000-2006 Netfilter Core Team
[ 2.934027] sit: IPv6 over IPv4 tunneling driver
[ 2.938992] NET: Registered protocol family 17
[ 2.943537] Key type dns_resolver registered
[ 2.948543] Loading module verification certificates
[ 2.954847] MODSIGN: Loaded cert 'Magrathea: Glacier signing key: 0c33cdda5e831cd8c069c7b17dc72268cc6fc0e7'
[ 2.964701] registered taskstats version 1
[ 2.970797] Key type encrypted registered
[ 2.976627] IMA: No TPM chip found, activating TPM-bypass!
[ 2.984354] usb 2-2: New USB device found, idVendor=0624, idProduct=0291
[ 2.985121] Magic number: 5:366:76
[ 2.994746] usb 2-2: New USB device strings: Mfr=1, Product=2, SerialNumber=0
[ 2.994749] console [netcon0] enabled
[ 2.994750] netconsole: network logging started
[ 3.010237] usb 2-2: Product: Avocent AVRIQ-USB
[ 3.014825] usb 2-2: Manufacturer: Avocent
[ 3.053751] input: Avocent Avocent AVRIQ-USB as /devices/pci0000:00/0000:00:1d.0/usb2/2-2/2-2:1.0/input/input2
[ 3.063985] hid-generic 0003:0624:0291.0001: input,hidraw0: USB HID v1.10 Keyboard [Avocent Avocent AVRIQ-USB] on usb-0000:00:1d.0-2/input0
[ 3.104851] input: Avocent Avocent AVRIQ-USB as /devices/pci0000:00/0000:00:1d.0/usb2/2-2/2-2:1.1/input/input3
[ 3.115119] hid-generic 0003:0624:0291.0002: input,hidraw1: USB HID v1.10 Mouse [Avocent Avocent AVRIQ-USB] on usb-0000:00:1d.0-2/input1
[ 3.162132] ALSA device list:
[ 3.165166] #0: HDA Intel at 0xf3300000 irq 65
[ 3.201389] sdd: sdd1 sdd2 sdd3
[ 3.205088] sd 5:0:0:0: [sdd] Attached SCSI disk
[ 3.211246] Freeing unused kernel memory: 1160k freed
[ 3.216800] Write protecting the kernel read-only data: 14336k
[ 3.227947] Freeing unused kernel memory: 1456k freed
[ 3.235391] Freeing unused kernel memory: 504k freed
[ 3.272271] dracut: dracut-009-12.fc15
[ 3.287701] udev[1173]: starting version 167
[ 3.320738] dracut: Starting plymouth daemon
[ 3.353350] Floppy drive(s): fd0 is 1.44M
[ 3.370234] FDC 0 is a post-1991 82077
[ 3.691208] kjournald starting. Commit interval 5 seconds
[ 3.691272] EXT3-fs (sda2): mounted filesystem with writeback data mode
[ 3.763581] dracut: Checking filesystems
[ 3.767598] dracut: fsck -T -t noopts=_netdev -A -a
[ 3.957734] dracut: /dev/sda2: Superblock last mount time is in the future. (by less than a day, probably due to the hardware clock being incorrectly set) FIXED. /dev/sda2: clean, 259572/4489216 files, 7067522/17929984 blocks
[ 3.977995] dracut: Remounting /dev/disk/by-uuid/90e92cac-8f9b-464d-9e00-11491cc4bf8e with -o ro,
[ 4.027270] kjournald starting. Commit interval 5 seconds
[ 4.027306] EXT3-fs (sda2): mounted filesystem with writeback data mode
[ 4.066278] dracut: Mounted root filesystem /dev/sda2
[ 4.207925] dracut: Switching root
[ 4.999267] systemd[1]: systemd 26 running in system mode. (+PAM +LIBWRAP +AUDIT +SELINUX +SYSVINIT +LIBCRYPTSETUP; fedora)
More information about the kexec
mailing list