[PATCH] x86 e820: only void usable memory areas in memmap=exactmap case
Thomas Renninger
trenn at suse.de
Tue Jan 22 10:21:01 EST 2013
On Tuesday, January 15, 2013 05:45:43 AM Yinghai Lu wrote:
> On Mon, Jan 14, 2013 at 4:54 PM, Thomas Renninger <trenn at suse.de> wrote:
...
> > From what I can see the patch looks fine, but above part should
> > simply be left out.
>
> then, I would like to rename it to resetusablemap instead.
>
> like attached.
I tried this one out on linux-x86-tip tree on the mm2 branch
This one already had your patch:
x86, mm: Let "memmap=" take more entries one time
and I additionally added:
x86 e820: Check for exactmap appearance when parsing first memmap option
and the one you posted one mail earlier:
x86 e820: Introduce memmap=resetusablemap for kdump usage
I just re-posted your 2 patches also adding some kernel-parameter
documention, subject:
[PATCH 0/2] Only parse exactmap once, introduce memmap=resetusablemap
I adjusted kexec tools to identify the kernel version from the kernel
it loads.
I posted these patches separately, subject (google should find it
pretty soon):
[PATCH 0/3] Make use of new memmap= kernel parameter syntax
for those who are interested in these to:
- make use of comma separated memmap= option
Let "memmap=" take more entries one time
- Do not pass unusable (ACPI or whatever reserved mem) via memmap=x#y
- Do use memmap=resetusablemap instead of memmap=exactmap
in case the kernel to load is of version 3.9 or newer.
Otherwise there is no change.
Unfortunately I cannot see a proper way to backport this.
The only way may be to:
- In the backported kernel inverse the condition to prefer resetusablemap
over exactmap
- In kexec pass both to older kernels: memmap=exactmap memmap=resetusablemap
and all the ACPI reservation memmap= params
I tried this on a somewhat quicker booting machine with quite some more
memmap= params passed by kexec. I reset the machine hard when it started
kdump:
Copying data : [ 20 %]
as I expect that if it comes that far, things work. In both cases the
kernel was dumped:
kexec using new resetusablemap syntax (with kexec debug enabled):
===================================
./build/sbin/kexec -d -p /boot/vmlinuz-3.7.0-rc6-default+ --append="root=/dev/disk/by-id/ata-Hitachi_HDS721016CLA382_JPAB40HM2KUK6B-part6 console=tty0
console=ttyS0,57600 sysrq_always_enabled panic=100 ignore_loglevel resume=/dev/disk/by-id/ata-Hitachi_HDS721016CLA382_JPAB40HM2KUK6B-part2 apic=verbose debug
vga=normal elevator=deadline sysrq=yes reset_devices irqpoll maxcpus=1 " --initrd=/boot/initrd-3.7.0-rc6-default+-kdump...
Kernel release: 3.7.0-rc6-d in long format: 0x30700
...
root=/dev/disk/by-id/ata-Hitachi_HDS721016CLA382_JPAB40HM2KUK6B-part6 console=tty0 console=ttyS0,57600 sysrq_always_enabled panic=100 ignore_loglevel
resume=/dev/disk/by-id/ata-Hitachi_HDS721016CLA382_JPAB40HM2KUK6B-part2 apic=verbose debug vga=normal elevator=deadline sysrq=yes reset_devices irqpoll maxcpus=1
memmap=resetusablemap,559K at 64K,261560K at 638976K elfcorehdr=900536K
...
===================================
important parts of crash kernel log with new syntax:
===================================
[48023.711213] RIP [<ffffffff812f368d>] sysrq_handle_crash+0xd/0x20
[48023.724765] RSP <ffff88042411fe90>
[48023.732539] CR2: 0000000000000000
[ 0.000000] Initializing cgroup subsys cpuset
[ 0.000000] Initializing cgroup subsys cpu
[ 0.000000] Linux version 3.7.0-rc6-default+ (trenn at ett) (gcc version 4.5.1 20101208 [gcc-4_5-branch revision 167585] (SUSE Linux) ) #2 SMP Tue Jan 22 01:43:26
CET 2013
[ 0.000000] Command line: root=/dev/disk/by-id/ata-Hitachi_HDS721016CLA382_JPAB40HM2KUK6B-part6 console=tty0 console=ttyS0,57600 sysrq_always_enabled panic=100
ignore_loglevel resume=/dev/disk/by-id/ata-Hitachi_HDS721016CLA382_JPAB40HM2KUK6B-part2 apic=verbose debug vga=normal elevator=deadline sysrq=yes reset_devices
irqpoll maxcpus=1 memmap=resetusablemap,559K at 64K,261560K at 638976K elfcorehdr=900536K
[ 0.000000] e820: BIOS-provided physical RAM map:
[ 0.000000] BIOS-e820: [mem 0x0000000000000100-0x000000000009bbff] usable
[ 0.000000] BIOS-e820: [mem 0x000000000009bc00-0x000000000009ffff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000000e0000-0x00000000000fffff] reserved
[ 0.000000] BIOS-e820: [mem 0x0000000000100000-0x00000000b93dafff] usable
[ 0.000000] BIOS-e820: [mem 0x00000000b93db000-0x00000000b9454fff] ACPI data
[ 0.000000] BIOS-e820: [mem 0x00000000b9455000-0x00000000bb155fff] usable
[ 0.000000] BIOS-e820: [mem 0x00000000bb156000-0x00000000bb166fff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000bb167000-0x00000000bb3d7fff] usable
[ 0.000000] BIOS-e820: [mem 0x00000000bb3d8000-0x00000000bb6d8fff] ACPI NVS
[ 0.000000] BIOS-e820: [mem 0x00000000bb6d9000-0x00000000bd9fcfff] usable
[ 0.000000] BIOS-e820: [mem 0x00000000bd9fd000-0x00000000bdbfcfff] ACPI NVS
[ 0.000000] BIOS-e820: [mem 0x00000000bdbfd000-0x00000000bdcdcfff] usable
[ 0.000000] BIOS-e820: [mem 0x00000000bdcdd000-0x00000000bdde6fff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000bdde7000-0x00000000bde8ffff] ACPI NVS
[ 0.000000] BIOS-e820: [mem 0x00000000bde90000-0x00000000bde90fff] ACPI data
[ 0.000000] BIOS-e820: [mem 0x00000000bde91000-0x00000000bdf07fff] ACPI NVS
[ 0.000000] BIOS-e820: [mem 0x00000000bdf08000-0x00000000bdf08fff] ACPI data
[ 0.000000] BIOS-e820: [mem 0x00000000bdf09000-0x00000000bdf0afff] ACPI NVS
[ 0.000000] BIOS-e820: [mem 0x00000000bdf0b000-0x00000000bdf0bfff] ACPI data
[ 0.000000] BIOS-e820: [mem 0x00000000bdf0c000-0x00000000bdf0cfff] ACPI NVS
[ 0.000000] BIOS-e820: [mem 0x00000000bdf0d000-0x00000000bdf23fff] ACPI data
[ 0.000000] BIOS-e820: [mem 0x00000000bdf24000-0x00000000bdfb0fff] ACPI NVS
[ 0.000000] BIOS-e820: [mem 0x00000000bdfb1000-0x00000000bdffffff] usable
[ 0.000000] BIOS-e820: [mem 0x00000000be000000-0x00000000cfffffff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000fec00000-0x00000000fec00fff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000fed19000-0x00000000fed19fff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000fed1c000-0x00000000fed1ffff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000fee00000-0x00000000fee00fff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000ffa20000-0x00000000ffffffff] reserved
[ 0.000000] BIOS-e820: [mem 0x0000000100000000-0x000000083fffffff] usable
[ 0.000000] debug: ignoring loglevel setting.
[ 0.000000] e820: last_pfn = 0x840000 max_arch_pfn = 0x400000000
[ 0.000000] e820: remove [mem 0x00000000-0xfffffffffffffffe] usable
[ 0.000000] NX (Execute Disable) protection: active
[ 0.000000] e820: user-defined physical RAM map:
[ 0.000000] user: [mem 0x0000000000010000-0x000000000009bbff] usable
[ 0.000000] user: [mem 0x000000000009bc00-0x000000000009ffff] reserved
[ 0.000000] user: [mem 0x00000000000e0000-0x00000000000fffff] reserved
[ 0.000000] user: [mem 0x0000000027000000-0x0000000036f6dfff] usable
[ 0.000000] user: [mem 0x00000000b93db000-0x00000000b9454fff] ACPI data
[ 0.000000] user: [mem 0x00000000bb156000-0x00000000bb166fff] reserved
[ 0.000000] user: [mem 0x00000000bb3d8000-0x00000000bb6d8fff] ACPI NVS
[ 0.000000] user: [mem 0x00000000bd9fd000-0x00000000bdbfcfff] ACPI NVS
[ 0.000000] user: [mem 0x00000000bdcdd000-0x00000000bdde6fff] reserved
[ 0.000000] user: [mem 0x00000000bdde7000-0x00000000bde8ffff] ACPI NVS
[ 0.000000] user: [mem 0x00000000bde90000-0x00000000bde90fff] ACPI data
[ 0.000000] user: [mem 0x00000000bde91000-0x00000000bdf07fff] ACPI NVS
[ 0.000000] user: [mem 0x00000000bdf08000-0x00000000bdf08fff] ACPI data
[ 0.000000] user: [mem 0x00000000bdf09000-0x00000000bdf0afff] ACPI NVS
[ 0.000000] user: [mem 0x00000000bdf0b000-0x00000000bdf0bfff] ACPI data
[ 0.000000] user: [mem 0x00000000bdf0c000-0x00000000bdf0cfff] ACPI NVS
[ 0.000000] user: [mem 0x00000000bdf0d000-0x00000000bdf23fff] ACPI data
[ 0.000000] user: [mem 0x00000000bdf24000-0x00000000bdfb0fff] ACPI NVS
[ 0.000000] user: [mem 0x00000000be000000-0x00000000cfffffff] reserved
[ 0.000000] user: [mem 0x00000000fec00000-0x00000000fec00fff] reserved
[ 0.000000] user: [mem 0x00000000fed19000-0x00000000fed19fff] reserved
[ 0.000000] user: [mem 0x00000000fed1c000-0x00000000fed1ffff] reserved
[ 0.000000] user: [mem 0x00000000fee00000-0x00000000fee00fff] reserved
[ 0.000000] user: [mem 0x00000000ffa20000-0x00000000ffffffff] reserved
[ 0.000000] DMI 2.6 present.
...
[ 2.370015] PCI: MMCONFIG for domain 0000 [bus 00-ff] at [mem 0xc0000000-0xcfffffff] (base 0xc0000000)
[ 2.390823] PCI: MMCONFIG at [mem 0xc0000000-0xcfffffff] reserved in E820
===================================
===================================
kexec using old exactmap syntax (with kexec debug enabled):
===================================
./build/sbin/kexec -d -p /boot/vmlinuz-3.7.0-rc6-default+ --append="root=/dev/disk/by-id/ata-Hitachi_HDS721016CLA382_JPAB40HM2KUK6B-part6 console=tty0
console=ttyS0,57600 sysrq_always_enabled panic=100 ignore_loglevel resume=/dev/disk/by-id/ata-Hitachi_HDS721016CLA382_JPAB40HM2KUK6B-part2 apic=verbose debug
vga=normal elevator=deadline sysrq=yes reset_devices irqpoll maxcpus=1 " --initrd=/boot/initrd-3.7.0-rc6-default+-kdump
...
root=/dev/disk/by-id/ata-Hitachi_HDS721016CLA382_JPAB40HM2KUK6B-part6 console=tty0 console=ttyS0,57600 sysrq_always_enabled panic=100 igno
re_loglevel resume=/dev/disk/by-id/ata-Hitachi_HDS721016CLA382_JPAB40HM2KUK6B-part2 apic=verbose debug vga=normal elevator=deadline sysrq=
yes reset_devices irqpoll maxcpus=1 memmap=exactmap memmap=559K at 64K memmap=261560K at 638976K elfcorehdr=900536K memmap=488K#3034988K memma
p=3076K#3067744K memmap=2048K#3106804K memmap=676K#3110812K memmap=4K#3111488K memmap=476K#3111492K memmap=4K#3111968K memmap=8K#3111972K
memmap=4K#3111980K memmap=4K#3111984K memmap=92K#3111988K memmap=564K#3112080K
===================================
important parts of crash kernel log with old syntax
(compare unnecessary memmap=x#y additions and the
resulting broken e820 user defined map):
===================================
[ 856.564790] RIP [<ffffffff812f368d>] sysrq_handle_crash+0xd/0x20
[ 856.578345] RSP <ffff880424197e90>
[ 856.586124] CR2: 0000000000000000
[ 0.000000] Initializing cgroup subsys cpuset
[ 0.000000] Initializing cgroup subsys cpu
[ 0.000000] Linux version 3.7.0-rc6-default+ (trenn at ett) (gcc version 4.5.1 20101208 [gcc-4_5-branch revision 167585] (SUSE Linux) ) #2 SMP Tue Jan 22 01:43:26
CET 2013
[ 0.000000] Command line: root=/dev/disk/by-id/ata-Hitachi_HDS721016CLA382_JPAB40HM2KUK6B-part6 console=tty0 console=ttyS0,57600 sysrq_always_enabled panic=100
ignore_loglevel resume=/dev/disk/by-id/ata-Hitachi_HDS721016CLA382_JPAB40HM2KUK6B-part2 apic=verbose debug vga=normal elevator=deadline sysrq=yes reset_devices
irqpoll maxcpus=1 memmap=exactmap memmap=559K at 64K memmap=261560K at 638976K elfcorehdr=900536K memmap=488K#3034988K memmap=3076K#3067744K memmap=2048K#3106804K
memmap=676K#3110812K memmap=4K#3111488K memmap=476K#3111492K memmap=4K#3111968K memmap=8K#3111972K memmap=4K#3111980K memmap=4K#3111984K memmap=92K#3111988K
memmap=564K#3112080K
[ 0.000000] e820: BIOS-provided physical RAM map:
[ 0.000000] BIOS-e820: [mem 0x0000000000000100-0x000000000009bbff] usable
[ 0.000000] BIOS-e820: [mem 0x000000000009bc00-0x000000000009ffff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000000e0000-0x00000000000fffff] reserved
[ 0.000000] BIOS-e820: [mem 0x0000000000100000-0x00000000b93dafff] usable
[ 0.000000] BIOS-e820: [mem 0x00000000b93db000-0x00000000b9454fff] ACPI data
[ 0.000000] BIOS-e820: [mem 0x00000000b9455000-0x00000000bb155fff] usable
[ 0.000000] BIOS-e820: [mem 0x00000000bb156000-0x00000000bb166fff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000bb167000-0x00000000bb3d7fff] usable
[ 0.000000] BIOS-e820: [mem 0x00000000bb3d8000-0x00000000bb6d8fff] ACPI NVS
[ 0.000000] BIOS-e820: [mem 0x00000000bb6d9000-0x00000000bd9fcfff] usable
[ 0.000000] BIOS-e820: [mem 0x00000000bd9fd000-0x00000000bdbfcfff] ACPI NVS
[ 0.000000] BIOS-e820: [mem 0x00000000bdbfd000-0x00000000bdcdcfff] usable
[ 0.000000] BIOS-e820: [mem 0x00000000bdcdd000-0x00000000bdde6fff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000bdde7000-0x00000000bde8ffff] ACPI NVS
[ 0.000000] BIOS-e820: [mem 0x00000000bde90000-0x00000000bde90fff] ACPI data
[ 0.000000] BIOS-e820: [mem 0x00000000bde91000-0x00000000bdf07fff] ACPI NVS
[ 0.000000] BIOS-e820: [mem 0x00000000bdf08000-0x00000000bdf08fff] ACPI data
[ 0.000000] BIOS-e820: [mem 0x00000000bdf09000-0x00000000bdf0afff] ACPI NVS
[ 0.000000] BIOS-e820: [mem 0x00000000bdf0b000-0x00000000bdf0bfff] ACPI data
[ 0.000000] BIOS-e820: [mem 0x00000000bdf0c000-0x00000000bdf0cfff] ACPI NVS
[ 0.000000] BIOS-e820: [mem 0x00000000bdf0d000-0x00000000bdf23fff] ACPI data
[ 0.000000] BIOS-e820: [mem 0x00000000bdf24000-0x00000000bdfb0fff] ACPI NVS
[ 0.000000] BIOS-e820: [mem 0x00000000bdfb1000-0x00000000bdffffff] usable
[ 0.000000] BIOS-e820: [mem 0x00000000be000000-0x00000000cfffffff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000fec00000-0x00000000fec00fff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000fed19000-0x00000000fed19fff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000fed1c000-0x00000000fed1ffff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000fee00000-0x00000000fee00fff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000ffa20000-0x00000000ffffffff] reserved
[ 0.000000] BIOS-e820: [mem 0x0000000100000000-0x000000083fffffff] usable
[ 0.000000] debug: ignoring loglevel setting.
[ 0.000000] e820: last_pfn = 0x840000 max_arch_pfn = 0x400000000
[ 0.000000] NX (Execute Disable) protection: active
[ 0.000000] e820: user-defined physical RAM map:
[ 0.000000] user: [mem 0x0000000000010000-0x000000000009bbff] usable
[ 0.000000] user: [mem 0x0000000027000000-0x0000000036f6dfff] usable
[ 0.000000] user: [mem 0x00000000b93db000-0x00000000b9454fff] ACPI data
[ 0.000000] user: [mem 0x00000000bb3d8000-0x00000000bb6d8fff] ACPI data
[ 0.000000] user: [mem 0x00000000bd9fd000-0x00000000bdbfcfff] ACPI data
[ 0.000000] user: [mem 0x00000000bdde7000-0x00000000bdfb0fff] ACPI data
[ 0.000000] DMI 2.6 present.
...
[ 2.264005] PCI: MMCONFIG for domain 0000 [bus 00-ff] at [mem 0xc0000000-0xcfffffff] (base 0xc0000000)
[ 2.284811] PCI: not using MMCONFIG
===================================
Thomas
More information about the kexec
mailing list