[PATCH v4 3/6] kexec, x86: add boot header member for version 2.12
Yinghai Lu
yinghai at kernel.org
Sat Nov 24 15:47:43 EST 2012
will use ext_ramdisk_image/size, and xloadflags to put
ramdisk and bzImage high for 64bit.
Signed-off-by: Yinghai Lu <yinghai at kernel.org>
---
include/x86/x86-linux.h | 32 +++++++++++++++++++++++++++-----
1 files changed, 27 insertions(+), 5 deletions(-)
diff --git a/include/x86/x86-linux.h b/include/x86/x86-linux.h
index 27af02b..a2452f2 100644
--- a/include/x86/x86-linux.h
+++ b/include/x86/x86-linux.h
@@ -32,7 +32,7 @@ struct drive_info_struct {
};
struct sys_desc_table {
uint16_t length;
- uint8_t table[318];
+ uint8_t table[30];
};
struct apm_bios_info {
@@ -112,6 +112,10 @@ struct x86_linux_param_header {
struct apm_bios_info apm_bios_info; /* 0x40 */
struct drive_info_struct drive_info; /* 0x80 */
struct sys_desc_table sys_desc_table; /* 0xa0 */
+ uint32_t ext_ramdisk_image; /* 0xc0 */
+ uint32_t ext_ramdisk_size; /* 0xc4 */
+ uint32_t ext_cmd_line_ptr; /* 0xc8 */
+ uint8_t reserved4_1[0x1e0 - 0xcc]; /* 0xcc */
uint32_t alt_mem_k; /* 0x1e0 */
uint8_t reserved5[4]; /* 0x1e4 */
uint8_t e820_map_nr; /* 0x1e8 */
@@ -174,11 +178,18 @@ struct x86_linux_param_header {
/* 2.04+ */
uint32_t kernel_alignment; /* 0x230 */
uint8_t relocatable_kernel; /* 0x234 */
- uint8_t reserved15[3]; /* 0x235 */
+ uint8_t min_alignment; /* 0x235 */
+ uint16_t xloadflags; /* 0x236 */
uint32_t cmdline_size; /* 0x238 */
uint32_t hardware_subarch; /* 0x23C */
uint64_t hardware_subarch_data; /* 0x240 */
- uint8_t reserved16[0x290 - 0x248]; /* 0x248 */
+ uint32_t payload_offset; /* 0x248 */
+ uint32_t payload_length; /* 0x24C */
+ uint64_t setup_data; /* 0x250 */
+ uint64_t pref_address; /* 0x258 */
+ uint32_t init_size; /* 0x260 */
+ uint32_t handover_offset; /* 0x264 */
+ uint8_t reserved16[0x290 - 0x268]; /* 0x268 */
uint32_t edd_mbr_sig_buffer[EDD_MBR_SIG_MAX]; /* 0x290 */
#endif
struct e820entry e820_map[E820MAX]; /* 0x2d0 */
@@ -195,7 +206,11 @@ struct x86_linux_faked_param_header {
};
struct x86_linux_header {
- uint8_t reserved1[0x1f1]; /* 0x000 */
+ uint8_t reserved1[0xc0]; /* 0x000 */
+ uint32_t ext_ramdisk_image; /* 0x0c0 */
+ uint32_t ext_ramdisk_size; /* 0x0c4 */
+ uint32_t ext_cmd_line_ptr; /* 0x0c8 */
+ uint8_t reserved1_1[0x1f1-0xcc]; /* 0x0cc */
uint8_t setup_sects; /* 0x1f1 */
uint16_t root_flags; /* 0x1f2 */
uint16_t syssize; /* 0x1f4 */
@@ -241,10 +256,17 @@ struct x86_linux_header {
#else
uint32_t kernel_alignment; /* 0x230 */
uint8_t relocatable_kernel; /* 0x234 */
- uint8_t reserved6[3]; /* 0x235 */
+ uint8_t min_alignment; /* 0x235 */
+ uint16_t xloadflags; /* 0x236 */
uint32_t cmdline_size; /* 0x238 */
uint32_t hardware_subarch; /* 0x23C */
uint64_t hardware_subarch_data; /* 0x240 */
+ uint32_t payload_offset; /* 0x248 */
+ uint32_t payload_length; /* 0x24C */
+ uint64_t setup_data; /* 0x250 */
+ uint64_t pref_address; /* 0x258 */
+ uint32_t init_size; /* 0x260 */
+ uint32_t handover_offset; /* 0x264 */
#endif
} PACKED;
--
1.7.7
More information about the kexec
mailing list