BUG: zonelist->_zonerefs == 0x1c08
Vivek Goyal
vgoyal at redhat.com
Tue Nov 22 10:27:39 EST 2011
On Tue, Nov 22, 2011 at 02:00:24AM -0800, David Rientjes wrote:
> On Tue, 22 Nov 2011, Dave Young wrote:
>
> > [ 0.000000] Linux version 3.2.0-rc2+ (dave at darkstar) (gcc version
> > 4.5.2 (GCC) ) #256 SMP
> > [ 0.000000] Command line: ro root=/dev/mapper/vg_dellper71001-lv_root
> > rd_LVM_LV=vg_dellp
> > [ 0.000000] KERNEL supported cpus:
> > [ 0.000000] Intel GenuineIntel
> > [ 0.000000] AMD AuthenticAMD
> > [ 0.000000] Centaur CentaurHauls
> > [ 0.000000] BIOS-provided physical RAM map:
> > [ 0.000000] BIOS-e820: 0000000000000100 - 00000000000a0000 (usable)
> > [ 0.000000] BIOS-e820: 0000000000100000 - 00000000cf379000 (usable)
> > [ 0.000000] BIOS-e820: 00000000cf379000 - 00000000cf38f000 (reserved)
> > [ 0.000000] BIOS-e820: 00000000cf38f000 - 00000000cf3ce000 (ACPI data)
> > [ 0.000000] BIOS-e820: 00000000cf3ce000 - 00000000d0000000 (reserved)
> > [ 0.000000] BIOS-e820: 00000000e0000000 - 00000000f0000000 (reserved)
> > [ 0.000000] BIOS-e820: 00000000fe000000 - 0000000100000000 (reserved)
> > [ 0.000000] BIOS-e820: 0000000100000000 - 0000000630000000 (usable)
> > [ 0.000000] last_pfn = 0x630000 max_arch_pfn = 0x400000000
> > [ 0.000000] NX (Execute Disable) protection: active
> > [ 0.000000] user-defined physical RAM map:
> > [ 0.000000] user: 0000000000000000 - 0000000000010000 (reserved)
> > [ 0.000000] user: 0000000000010000 - 00000000000a0000 (usable)
> > [ 0.000000] user: 0000000003090000 - 000000000affb000 (usable)
> > [ 0.000000] user: 00000000cf379000 - 00000000cf38f000 (reserved)
> > [ 0.000000] user: 00000000cf38f000 - 00000000cf3ce000 (ACPI data)
> > [ 0.000000] user: 00000000cf3ce000 - 00000000d0000000 (reserved)
> > [ 0.000000] user: 00000000e0000000 - 00000000f0000000 (reserved)
> > [ 0.000000] user: 00000000fe000000 - 0000000100000000 (reserved)
> > [ 0.000000] DMI 2.6 present.
> > [ 0.000000] No AGP bridge found
> > [ 0.000000] last_pfn = 0xaffb max_arch_pfn = 0x400000000
> > [ 0.000000] x86 PAT enabled: cpu 0, old 0x7010600070106, new
> > 0x7010600070106
> > [ 0.000000] found SMP MP-table at [ffff8800000fe710] fe710
> > [ 0.000000] Using GB pages for direct mapping
> > [ 0.000000] init_memory_mapping: 0000000000000000-000000000affb000
> > [ 0.000000] RAMDISK: 0ac79000 - 0afef000
> > [ 0.000000] ACPI: RSDP 00000000000f1240 00024 (v02 DELL )
> > [ 0.000000] ACPI: XSDT 00000000000f1344 0009C (v01 DELL PE_SC3
> > 00000001 DELL 0000000
> > [ 0.000000] ACPI: FACP 00000000cf3b3f9c 000F4 (v03 DELL PE_SC3
> > 00000001 DELL 0000000
> > [ 0.000000] ACPI: DSDT 00000000cf38f000 03D72 (v01 DELL PE_SC3
> > 00000001 INTL 2005062
> > [ 0.000000] ACPI: FACS 00000000cf3b6000 00040
> > [ 0.000000] ACPI: APIC 00000000cf3b3478 0015E (v01 DELL PE_SC3
> > 00000001 DELL 0000000
> > [ 0.000000] ACPI: SPCR 00000000cf3b35d8 00050 (v01 DELL PE_SC3
> > 00000001 DELL 0000000
> > [ 0.000000] ACPI: HPET 00000000cf3b362c 00038 (v01 DELL PE_SC3
> > 00000001 DELL 0000000
> > [ 0.000000] ACPI: DMAR 00000000cf3b3668 001C0 (v01 DELL PE_SC3
> > 00000001 DELL 0000000
> > [ 0.000000] ACPI: MCFG 00000000cf3b38c4 0003C (v01 DELL PE_SC3
> > 00000001 DELL 0000000
> > [ 0.000000] ACPI: WD__ 00000000cf3b3904 00134 (v01 DELL PE_SC3
> > 00000001 DELL 0000000
> > [ 0.000000] ACPI: SLIC 00000000cf3b3a3c 00176 (v01 DELL PE_SC3
> > 00000001 DELL 0000000
> > [ 0.000000] ACPI: ERST 00000000cf392ef4 00270 (v01 DELL PE_SC3
> > 00000001 DELL 0000000
> > [ 0.000000] ACPI: HEST 00000000cf393164 003A8 (v01 DELL PE_SC3
> > 00000001 DELL 0000000
> > [ 0.000000] ACPI: BERT 00000000cf392d74 00030 (v01 DELL PE_SC3
> > 00000001 DELL 0000000
> > [ 0.000000] ACPI: EINJ 00000000cf392da4 00150 (v01 DELL PE_SC3
> > 00000001 DELL 0000000
> > [ 0.000000] ACPI: SRAT 00000000cf3b3bc0 00370 (v01 DELL PE_SC3
> > 00000001 DELL 0000000
> > [ 0.000000] ACPI: TCPA 00000000cf3b3f34 00064 (v02 DELL PE_SC3
> > 00000001 DELL 0000000
> > [ 0.000000] ACPI: SSDT 00000000cf3b7000 02A4C (v01 INTEL PPM RCM
> > 80000001 INTL 2006110
> > [ 0.000000] SRAT: PXM 1 -> APIC 0x20 -> Node 0
> > [ 0.000000] SRAT: PXM 2 -> APIC 0x00 -> Node 1
> > [ 0.000000] SRAT: PXM 1 -> APIC 0x34 -> Node 0
> > [ 0.000000] SRAT: PXM 2 -> APIC 0x14 -> Node 1
> > [ 0.000000] SRAT: PXM 1 -> APIC 0x21 -> Node 0
> > [ 0.000000] SRAT: PXM 2 -> APIC 0x01 -> Node 1
> > [ 0.000000] SRAT: PXM 1 -> APIC 0x35 -> Node 0
> > [ 0.000000] SRAT: PXM 2 -> APIC 0x15 -> Node 1
> > [ 0.000000] SRAT: Node 1 PXM 2 0-d0000000
> > [ 0.000000] SRAT: Node 1 PXM 2 100000000-330000000
> > [ 0.000000] SRAT: Node 0 PXM 1 330000000-630000000
> > [ 0.000000] Initmem setup node 1 0000000000000000-000000000affb000
> > [ 0.000000] NODE_DATA [000000000aff6000 - 000000000affafff]
>
> blk_throtl_init() is trying to allocate on a specific node and it appears
> like its zonelists were never built successfully. I'd guess it's trying
> to allocate on node 0 since it's not onlined above, probably because this
> is the crashkernel. Your SRAT maps two different nodes but it's only
> onlining node 1 and not node 0.
>
> The problem is that blk_alloc_queue_node() allocs the requeue_queue with
> __GFP_ZERO, which zeros it and never initialized the node field so it
> remains zero. blk_throtl_init() then calls kzalloc_node() on node 0 which
> doesn't have initialized zonelists.
>
> Maybe try this?
>
> diff --git a/block/blk-core.c b/block/blk-core.c
> index ea70e6c..99c1881 100644
> --- a/block/blk-core.c
> +++ b/block/blk-core.c
> @@ -467,6 +467,7 @@ struct request_queue *blk_alloc_queue_node(gfp_t gfp_mask, int node_id)
> q->backing_dev_info.state = 0;
> q->backing_dev_info.capabilities = BDI_CAP_MAP_COPY;
> q->backing_dev_info.name = "block";
> + q->node = node_id;
>
Storing q->node info at queue allocation time makes sense to me. In fact
it might make sense to clean it up from blk_init_allocated_queue_node
and assume that passed queue has queue->node set at the allocation time.
CCing Mike Snitzer who introduced blk_init_allocated_queue_node(). Mike
what do you think. I am not sure it makes sense to pass in nodeid, both
at queue allocation and queue initialization time. To me, it should make
more sense to allocate the queue at one node and that becomes the default
node for reset of the initialization.
I am wondering why node0 is not coming up in kdump kernel. Assuming that
you must have reserved memory in node0 in first kernel, shouldn't it come
up in second kernel?
Thanks
Vivek
More information about the kexec
mailing list