[ANNOUNCE] kexec-tools 2.0.2

Simon Horman horms at verge.net.au
Thu Jul 29 01:09:51 EDT 2010


[ repost: the first attempt was a reply to nothing ]

Hi all,

I am happy to announce the release of kexec-tools 2.0.2.
There were no changes between 2.0.2-rc2 and 2.0.2.

The release can be downloaded from kernel.org:

http://kernel.org/pub/linux/utils/kernel/kexec/kexec-tools-2.0.2.tar.gz
http://kernel.org/pub/linux/utils/kernel/kexec/

I have also tagged it in git:

Git:	 git://git.kernel.org/pub/scm/utils/kernel/kexec/kexec-tools.git
	 http://git.kernel.org/pub/scm/utils/kernel/kexec/kexec-tools.git
	 https://git.kernel.org/pub/scm/utils/kernel/kexec/kexec-tools.git
Git-Web: http://git.kernel.org/?p=utils/kernel/kexec/kexec-tools.git

==== N.B: New URLs for both downloads and git ===

A summary of the changes since the previous release,
kexec-tools 2.0.1, is below.

commit 7918271775078fc1c7b30dd84d026fa935a9f11f
Author: Simon Horman <horms at verge.net.au>
Date:   Thu Jul 29 13:40:00 2010 +0900

    kexec-tools 2.0.2
    
    Signed-off-by: Simon Horman <horms at verge.net.au>

commit ab82e4fc013a0293d016768fd9e28ede8b775675
Author: Simon Horman <horms at verge.net.au>
Date:   Tue Jul 13 11:33:47 2010 +0900

    kexec-tools 2.0.2-rc2
    
    Signed-off-by: Simon Horman <horms at verge.net.au>

commit 04b22ab9dda7e73064c9b20cf08308473a7b0951
Author: Simon Horman <horms at verge.net.au>
Date:   Tue Jul 13 11:32:16 2010 +0900

    build: Include missing files in tarball
    
    Signed-off-by: Simon Horman <horms at verge.net.au>

commit 42e90cfcde6ce3d0e9540cfe57485e378900393b
Author: Simon Horman <horms at verge.net.au>
Date:   Mon Jul 5 11:44:19 2010 +0900

    kexec-tools 2.0.2-rc1
    
    Signed-off-by: Simon Horman <horms at verge.net.au>

commit 26ed909df48ea3db3f7395713a9c68c94d091032
Author: Cliff Wickman <cpw at sgi.com>
Date:   Thu Jun 17 11:37:06 2010 -0500

    kexec: Unusable memory range type
    
    On SGI UV (x86_64) kexec grumbles about 'Unusable memory' ranges:
       Unknown type (%s) while parsing %s. Please "
       "report this as bug. Using RANGE_RESERVED now.
    
    uv44-sys:~ # cat /proc/iomem
    00000000-00000fff : System RAM
    00001000-00005fff : reserved
    00006000-0008efff : System RAM
    0008f000-0008ffff : ACPI Non-volatile Storage
    00090000-0009ffff : System RAM
    00100000-75ffcfff : System RAM
      01000000-0139dcaf : Kernel code
      0139dcb0-0192c12f : Kernel data
      01a28000-01cd7777 : Kernel bss
      02000000-09ffffff : Crash kernel
    75ffd000-76013fff : Unusable memory
    76014000-766a6fff : System RAM
    766a7000-766d6fff : Unusable memory
    ...
    
    This patch keeps Unusable memory as another RANGE_RESERVED area, but
    without the warning message.
    
    Diffed against git.kernel.org/pub/scm/linux/kernel/git/horms/kexec-tools.git
    
    Signed-off-by: Cliff Wickman <cpw at sgi.com>
    Signed-off-by: Simon Horman <horms at verge.net.au>

commit 4b4b2a533e218e287ab4aed25678434ad938309e
Author: Cliff Wickman <cpw at sgi.com>
Date:   Wed Jun 16 08:36:09 2010 -0500

    kexec: extend for large cpu count and memory
    
    The MAX_MEMORY_RANGES of 64 is too small for a very large NUMA machine.
    (A 512 processor SGI UV, for example.)
    
    And fix a temporary workaround (hack) in load_crashdump_segments() that
    assumes that 16k is sufficient for the size of the crashdump elf header.
    This is too small for a machine with a large cpu count. A PT_NOTE is created
    in the elf header for each cpu.
    
    Signed-off-by: Cliff Wickman <cpw at sgi.com>
    Signed-off-by: Simon Horman <horms at verge.net.au>

commit 436f1376e1621aeba54d8253244955df4865d5e9
Author: Matt Evans <matt at ozlabs.org>
Date:   Fri May 14 14:15:09 2010 +1000

    kexec-tools: Fix option/argument parsing
    
    The argument parsing is currently a bit broken as main()'s getopt_long()
    knows nothing about either the architecture-specific options or, even
    more specifically, the architecture-and-loader-specific options.
    
    This patch introduces new #defines for all architectures,
    KEXEC_ALL_OPTIONS and KEXEC_ALL_OPT_STR.  These contain all possible
    options for a given build, and the getopt_long() passes in main() and
    arch_process_options() will now recognise arch- and loader-specific
    options; these will not be re-ordered in argv[], there is no confusion
    over which argv[] entry is the kernel filename, and using '--opt=foo' and
    '--opt foo' both work.
    
    All architectures have command line options (and #define OPT_BLAHs)
    consolidated into their include/arch/option.h files.  x86_64 builds
    parts of i386/ as well, so now both share a single option.h file (with
    a symlink).
    
    Signed-off-by: Matt Evans <matt at ozlabs.org>
    Signed-off-by: Simon Horman <horms at verge.net.au>

commit b1dcc08ea79ca96256a9ae6ef59e5ea4e217ef1d
Author: Mika Westerberg <ext-mika.1.westerberg at nokia.com>
Date:   Wed May 5 09:58:33 2010 +0300

    kexec: implement ARM crashdump support
    
    Implement support for loading dump capture kernels for ARM architecture. ARM
    doesn't need any backup memory regions so only elfcore header is allocated from
    the top of the reserved memory region. Only zImages are supported.
    
    The dump capture kernel needs to be loaded to physical address corresponding to
    the memory region reserved with 'crashkernel=size at start' kernel command line
    parameter.
    
    Signed-off-by: Mika Westerberg <ext-mika.1.westerberg at nokia.com>
    Signed-off-by: Simon Horman <horms at verge.net.au>

commit 7429f91acaba453c819cc22b364a5f1339a275fd
Author: Mika Westerberg <ext-mika.1.westerberg at nokia.com>
Date:   Wed May 5 09:58:32 2010 +0300

    kexec: introduce phys_to_virt() function
    
    This function is used by ELF crashdump code which prepares crash memory headers
    for the dump capture kernel. Most architecture can use default version which
    just adds PAGE_OFFSET to the virtual address but some architectures might need
    some special handling.
    
    Signed-off-by: Mika Westerberg <ext-mika.1.westerberg at nokia.com>
    Signed-off-by: Simon Horman <horms at verge.net.au>

commit 992971824134441065c29f475153a4c142696102
Author: Simon Horman <horms at verge.net.au>
Date:   Fri May 14 00:25:19 2010 +0900

    ppc: Fix gamecube build
    
    This fixes the kexec-build on ppc32 when
    the --game-cube option is supplied to ./configure.
    It seems to have bit-rotted a little.
    
    Cc: Sebastian Andrzej Siewior <sebastian at breakpoint.cc>
    Cc: Maxim Uvarov <muvarov at gmail.com>
    Signed-off-by: Simon Horman <horms at verge.net.au>

commit e5ebc83034a407bf208578fb99e719886ec74cde
Author: Matt Evans <matt at ozlabs.org>
Date:   Fri May 14 13:07:53 2010 +1000

    kexec-tools, ppc64: Fix segfault parsing DR memory property
    
    add_dyn_reconf_usable_mem_property() iterates over memory spans
    in /ibm,dynamic-reconfiguration-memory/ibm,dynamic-memory and intersects
    these with usablemem_rgns ranges.  In doing so it used an unchecked
    fixed-size array which will overrun on machines with lots of LMBs.
    
    This patch removes the fixed-sized arrays from
    add_dyn_reconf_usable_mem_property() and add_usable_mem_property(), in lieu of
    malloc/realloc/free.
    
    Signed-off-by: Matt Evans <matt at ozlabs.org>
    Michael Neuling <mikey at neuling.org>
    Signed-off-by: Simon Horman <horms at verge.net.au>

commit 45e8f29639d9f97b74389e5bd28c7a5cccbf3e2a
Author: Maxim Uvarov <muvarov at gmail.com>
Date:   Wed May 12 11:08:49 2010 +0400

    powerpc new toolchains fix (crt.S)
    
    Linker does not provide some vital functions when building freestanding
    applications with a new toolchain, so we have to provide our own CRT.
    
    p.s.
    Without the CRT we won't see any build errors (since the purgatory is
    linked with --no-undefined), but the purgatory code won't work,
    'kexec -e' will just hang the board.
    
    I added option to configure to keep code buildable for old toolchais.
    But there should be way to do this automatically.
    
    Author: Anton Vorontsov <avorontsov at ru.mvista.com>
    Signed-off-by: Maxim Uvarov <muvarov at gmail.com>
    Signed-off-by: Simon Horman <horms at verge.net.au>

commit 00f6fff403c6bbb3241def8451d17f5f2544b5a9
Author: Maxim Uvarov <muvarov at gmail.com>
Date:   Wed May 12 11:08:41 2010 +0400

    Fix kexec on powerpc32
    
    Signed-off-by: Maxim Uvarov <muvarov at gmail.com>
    Signed-off-by: Maxim Uvarov <muvarov at gmail.com>
    Signed-off-by: Simon Horman <horms at verge.net.au>

commit 51234576b4ed8d4fcaf2ef1bbd625e050c592d15
Author: Matt Evans <matt at ozlabs.org>
Date:   Thu May 13 17:33:59 2010 +1000

    kexec-tools: remove unused code from arch_process_options (arm, cris, ia64, mips, ppc)
    
    These architectures don't have any architecture-specific options
    (note: distinct from loader options, which are more specific), yet
    their arch_process_options() functions contain getopts_long() calls
    followed by no argument processing.  The code doesn't do anything,
    so this patch removes it.
    
    Signed-off-by: Matt Evans <matt at ozlabs.org>
    Signed-off-by: Simon Horman <horms at verge.net.au>

commit 6662d03f27ad1cf01f0b09b89f22e3e8eb3f097e
Author: Simon Horman <horms at verge.net.au>
Date:   Wed May 5 13:33:21 2010 +1000

    build: Don't modify CFLAGS in kexec/arch/mips/Makefile
    
    Revert this portion of recent MIPS changes as it actually effects the
    CFLAGS for all architectures.  Moreover I'm somewhat dubious about
    defaulting to -Werror for any architecture.
    
    Signed-off-by: Simon Horman <horms at verge.net.au>

commit 46f9ca97337dd48ac1cf663f528a1041b7e2805d
Author: Eric Miao <eric.miao at canonical.com>
Date:   Fri Apr 23 10:36:44 2010 +0800

    arm: place initrd to safer place according to zImage length
    
    The original fixed address of 0x800000 may be overwritten after the
    kernel is decompressed.  Assume a maximum decompression ratio of 4
    and place initrd right after that, just to be safer.
    
    Signed-off-by: Eric Miao <eric.miao at canonical.com>
    Signed-off-by: Simon Horman <horms at verge.net.au>

commit 65feee9df927bef15f0b1d2f9b285cb924a9f799
Author: Matt Evans <matt at ozlabs.org>
Date:   Mon May 10 14:39:34 2010 +1000

    kexec-tools, ppc64: Fix segfault on parsing of large device trees.
    
    ppc64's fs2dt used to use a fixed-size array into which the device tree
    was parsed.  There was no bounds checking, so with a large device tree other
    heap data ended up getting stomped -- SIGSEGV time.
    
    This patch adds a function, 'dt_reserve', to check whether there's enough space
    left prior to writing data to the array.  If not, the array is realloced.
    
    Signed-off-by: Matt Evans <matt at ozlabs.org>
    Ack-by: Michael Neuling <mikey at neuling.org>
    Signed-off-by: Simon Horman <horms at verge.net.au>

commit 64c4e7d1aedec929ba57bd1e89577098f2a63612
Author: Michael Neuling <mikey at neuling.org>
Date:   Wed May 5 11:48:53 2010 +1000

    kexec-tools, ppc64: fix build error on ppc64
    
    6adc05c6e3fdbc8b9f5d915af78ca05d0a09cb17 "some kexec MIPS
    improvements" broke pp64 as it turned on -Werror for all archs.
    
    This fixes the warning and hence ppc64 building.
    
    Signed-off-by: Michael Neuling <mikey at neuling.org>
    Signed-off-by: Simon Horman <horms at verge.net.au>

commit d3ab86bd6d8b5203c8b6e079355d5a878db24494
Merge: 2208c30 de5dd4d
Author: Simon Horman <horms at verge.net.au>
Date:   Thu Apr 1 09:10:56 2010 +1100

    Merge branch 'ppc32' of git://git.breakpoint.cc/bigeasy/kexec-tools

commit de5dd4d4036211b0a8e1839ce87984a074eb18f8
Author: Sebastian Andrzej Siewior <sebastian at breakpoint.cc>
Date:   Fri Jan 22 18:15:38 2010 +0100

    Let SH adn ARM use common uImage probe code
    
    The now generic probe function is more complete than the currently used.
    It seems that ARM's and SH's uImage are always uncompressed so it might
    be good to check for this.
    
    Cc: Paul Mundt <lethal at linux-sh.org>
    Cc: Marc Andre Tanner <mat at brain-dump.org>
    Signed-off-by: Sebastian Andrzej Siewior <bigeasy at linutronix.de>

commit 872edb58246b9f310bd99315e5e102ab754fb765
Author: Sebastian Andrzej Siewior <sebastian at breakpoint.cc>
Date:   Thu Mar 4 18:14:15 2010 +0100

    Split Powerpc's uImage code
    
    The check and uncompress code could be split and recycled by other arch.
    
    Signed-off-by: Sebastian Andrzej Siewior <bigeasy at linutronix.de>

commit 2208c3067904b56855daa8da1e7d96dc7d351fc6
Author: Ameya Palande <ameya.palande at nokia.com>
Date:   Mon Mar 29 14:52:58 2010 +0300

    kexec-tools: Use the build date for package release
    
    kexec built from git HEAD shows release date as 13th August 2009, which is not
    correct. Instead of that use the build date as release date.
    
    Signed-off-by: Ameya Palande <ameya.palande at nokia.com>
    Signed-off-by: Simon Horman <horms at verge.net.au>

commit 2a105fa6c139186a408e8d52f95fe00b11b1cc4d
Author: Ameya Palande <ameya.palande at nokia.com>
Date:   Fri Mar 19 15:58:52 2010 +0200

    kexec-tools: Fix a typo in rpm spec description
    
    Signed-off-by: Ameya Palande <ameya.palande at nokia.com>
    Signed-off-by: Simon Horman <horms at verge.net.au>

commit a7bfce1b279503d5c5e52d6b9f1d3ae6a2cd13ca
Author: Ameya Palande <ameya.palande at nokia.com>
Date:   Fri Mar 19 15:55:04 2010 +0200

    kexec-tools: Fix unused return value warning for fread
    
    Signed-off-by: Ameya Palande <ameya.palande at nokia.com>
    Signed-off-by: Simon Horman <horms at verge.net.au>

commit 529ad47e356a8e68be9cde771af8e909a784c3fc
Author: Ameya Palande <2ameya at gmail.com>
Date:   Thu Mar 18 22:03:24 2010 +0200

    kexec-tools: Use default rpmbuild definations
    
    Since current mechanism for building rpm into custom directory is not working,
    remove it and switch to system defaults for rpmbuild.
    
    Signed-off-by: Ameya Palande <ameya.palande at nokia.com>
    Signed-off-by: Simon Horman <horms at verge.net.au>

commit c17b20d49385404851c0f75f0a666813aa8c6f1f
Author: Ameya Palande <2ameya at gmail.com>
Date:   Thu Mar 18 22:03:23 2010 +0200

    kexec-tools: Add rpm spec file to the dist-clean target
    
    This patch adds rpm spec file to the "make dist-clean" target and also removes
    a wrong comment.
    
    Signed-off-by: Ameya Palande <ameya.palande at nokia.com>
    Signed-off-by: Simon Horman <horms at verge.net.au>

commit 2ee904a2d12bea835285905f55f0914b170d4c1f
Author: Ameya Palande <2ameya at gmail.com>
Date:   Thu Mar 18 22:03:22 2010 +0200

    kexec-tools: Add kdump and kexec_test to rpm spec
    
    Without this patch rpmbuild complains about unpackaged kdump and kexec_test
    files.
    
    Signed-off-by: Ameya Palande <ameya.palande at nokia.com>
    Signed-off-by: Simon Horman <horms at verge.net.au>

commit a131cd090f17fd91cdbd1c490ba59d366f940069
Author: Ameya Palande <2ameya at gmail.com>
Date:   Thu Mar 18 22:03:21 2010 +0200

    kexec-tools: Add missing include files in dist target
    
    Signed-off-by: Ameya Palande <ameya.palande at nokia.com>
    Signed-off-by: Simon Horman <horms at verge.net.au>

commit 1d469cf3f8c24e9441b805c33cd7f068a139274d
Author: Ameya Palande <2ameya at gmail.com>
Date:   Thu Mar 18 22:03:20 2010 +0200

    kexec-tools: Use same source in rpm spec and Makefile.in
    
    Signed-off-by: Ameya Palande <ameya.palande at nokia.com>
    Signed-off-by: Simon Horman <horms at verge.net.au>

commit 493b95471163dc842420c5a27200923f1c632552
Author: Ameya Palande <2ameya at gmail.com>
Date:   Thu Mar 18 22:03:19 2010 +0200

    kexec-tools: Fix rpm Version tag
    
    Version tag in rpm spec file doesn't allow '-', so use '_' to fix the rpm
    build.
    
    Signed-off-by: Ameya Palande <ameya.palande at nokia.com>
    Signed-off-by: Simon Horman <horms at verge.net.au>

commit e8ccd16e27cc5b111bf13275f69df179f162d6c1
Author: Ameya Palande <ameya.palande at nokia.com>
Date:   Sat Mar 13 14:39:10 2010 +0200

    kexec-tools: Fix unused return value warnings
    
    This patch fixes following warning:
    
    kexec/firmware_memmap.c: In function ‘parse_numeric_sysfs’:
    kexec/firmware_memmap.c:70: error: ignoring return value of ‘fgets’, declared
    with attribute warn_unused_result
    kexec/firmware_memmap.c: In function ‘parse_string_sysfs’:
    kexec/firmware_memmap.c:103: error: ignoring return value of ‘fgets’, declared
    with attribute warn_unused_result
    
    Difference between v1 and v2: Less indentation.
    
    Signed-off-by: Ameya Palande <ameya.palande at nokia.com>
    Signed-off-by: Simon Horman <horms at verge.net.au>

commit 2ff0927be86e92f3026fa4330a068b70e3fa2526
Author: Ameya Palande <ameya.palande at nokia.com>
Date:   Fri Mar 12 20:19:32 2010 +0200

    kexec-tools: Replace obsolate Copyright tag in rpm spec
    
    Signed-off-by: Ameya Palande <ameya.palande at nokia.com>
    Signed-off-by: Simon Horman <horms at verge.net.au>

commit 05348d6ff899706087c667d276066ac11aebf6bc
Author: Eric W. Biederman <ebiederm at xmission.com>
Date:   Thu Mar 11 00:22:07 2010 -0800

    x86: Fix biarch crashdump setup.
    
    Generate the correct crashdump header for x86_64 kernels
    when a 32bit kernel is used.
    
    Signed-off-by: Eric W. Biederman <ebiederm at aristanetworks.com>
    Signed-off-by: Simon Horman <horms at verge.net.au>

commit a2d9b444eb54029513ad2300466b3cf55dbcd9b5
Author: Eric W. Biederman <ebiederm at xmission.com>
Date:   Thu Mar 11 00:21:33 2010 -0800

    kexec: Figure out our native architecture before load
    
    This moves the computing of our native archtecture earlier so
    that load can use it, as arch/i386/crashdump-x86.c has been
    trying to.
    
    Signed-off-by: Eric W. Biederman <ebiederm at aristanetworks.com>
    Signed-off-by: Simon Horman <horms at verge.net.au>

commit c9d224fba0a8997d6008352f0be32aaaf4524fa1
Author: Eric W. Biederman <ebiederm at xmission.com>
Date:   Thu Mar 11 00:20:48 2010 -0800

    Refix concat_cmdline
    
    When removing the potential leak the logic was flipped which
    mean we never reached the case for handling when both parameters
    were set.
    
    Signed-off-by: Eric W. Biederman <ebiederm at aristanetworks.com>
    Signed-off-by: Simon Horman <horms at verge.net.au>

commit 6adc05c6e3fdbc8b9f5d915af78ca05d0a09cb17
Author: Maxim Uvarov <muvarov at gmail.com>
Date:   Wed Mar 3 14:05:53 2010 +0300

    some kexec MIPS improvements
    
    -  using simple   mips* ) in configure.ac to make it compilable on mips2
       and mips64
    - remove kexec/arch/mips/mips-setup-simple.S which prepares cmdline for
      new kernel, it is better to move this work to kernel code. BTW this code was
      compilable only on o32 because of t4 is not defined on 64-64 or n32 MIPS ABIs.
    - simple put cmdline as string, kernel code should catch cmdline like this
    
    int board_kexec_prepare(struct kimage *image)
    {
        int i;
        char *bootloader = "kexec";
        board_boot_desc_ptr->argc = 0;
        for(i=0;i<image->nr_segments;i++)
        {
            printk("segment %d
            if (!strncmp(bootloader, (char*)image->segment[i].buf,
                    strlen(bootloader)))
            {
                /*
                 * convert command line string to array
                 * of parameters (as bootloader does).
                 */
                int argc = 0, offt;
                char *str = (char *)image->segment[i].buf;
                char *ptr = strchr(str, ' ');
                while (ptr && (ARGV_MAX_ARGS > argc)) {
                    *ptr = '\0';
                    if (ptr[1] != ' ') {
                        offt = (int)(ptr - str + 1);
                        boot_desc_ptr->argv[argc] =
                            image->segment[i].mem + offt;
                        argc++;
                    }
                    ptr = strchr(ptr + 1, ' ');
                }
                boot_desc_ptr->argc = argc;
                break;
            }
        }
       Keep it as string make code simple and more readable.
    
    - add crashdump support
    - do not redefine syscalls numbers if they defined in system
      remove fixups for /proc/iomem. If your board provides wrong /proc/iomem please
      fix kernel, or at least you local version of kexec. No need to support it in
      main line. At least add option --fake-iomem
    - some minor fixes
    
    Signed-off-by: Maxim Uvarov <muvarov at gmail.com>
    Signed-off-by: Simon Horman <horms at verge.net.au>

commit 66a33d1e1625e136d458f964e9679e606ce9a409
Author: Sebastian Andrzej Siewior <bigeasy at linutronix.de>
Date:   Tue Jan 19 17:37:44 2010 +0100

    powerpc32: add support for uImage
    
    On PowerPC the uImage usually contains the compressed "final" kernel and
    not a tiny wrapper which relocates itself und uncomprosses the final
    kernel to its final position. Instead we uncompress the gzip image and
    put it the its final position.
    
    Signed-off-by: Sebastian Andrzej Siewior <bigeasy at linutronix.de>

commit e176002f2930d3dfef01eb0e997dd86731bb8fed
Author: Sebastian Andrzej Siewior <bigeasy at linutronix.de>
Date:   Thu Oct 16 15:45:39 2008 +0200

    powerpc32: add support to fixup the dtb
    
    A few device nodes are dynamically determined by the bootloader (MAC address,
    memory size, ..) and are not part of the device tree. The kernel command line
    is also read from dtb and usually not part of the device tree.
    With the libfdt it is now easy to add/replace nodes in the device tree.
    The user may specify "--reuse-node=/memory/reg" to update the memory/reg
    node to what ever is now. This requires the kernel to export the device
    tree via the procfs in /proc/device-tree.
    
    Signed-off-by: Sebastian Andrzej Siewior <bigeasy at linutronix.de>

commit 7775fee582c9f4be9d58c436a8c8517e56b2a404
Author: Sebastian Andrzej Siewior <bigeasy at linutronix.de>
Date:   Thu Oct 16 15:45:39 2008 +0200

    powerpc32: pull in libfdt
    
    This is v1.2.0 of libfdt from the dtc project which is available at
     git://www.jdl.com/software/dtc.git
    
    The other files
    - include/page.h
    - include/types.h
    - libfdt-wrapper.c
    - ops.h
    
    are part of the glue code which is used the powerpc boot wrapper code
    is comming from the Linux kernel v2.6.27-rc6 and has been modified a
    little to fit.
    
    Signed-off-by: Sebastian Andrzej Siewior <bigeasy at linutronix.de>

commit e2c28a627007fe372b2286fa366b497be6a94ea5
Author: Sebastian Andrzej Siewior <bigeasy at linutronix.de>
Date:   Wed Oct 1 10:04:16 2008 +0200

    powerpc: dtb and purgatory support for ppc32
    
    Some code dtb scanning & filling has been borrowed from ppc64.
    The old behavior is still available if compiled with GameCube,
    other PowerPC platform use the can purgatory and specify a new
    dtb.
    Booting a self contained elf image (incl. dtb / without the need
    for a bd sturct or the like) can be booted. The dtb support is currently
    optional. That means if the elf image does not contain a dtb file then
    the user has to supply a complete dtb (including mem size, command line,
    bus freq., mac addr, ...)
    
    Signed-off-by: Sebastian Andrzej Siewior <bigeasy at linutronix.de>

commit 3d06b10be52b2a5ddcd4328bc2da11c3cc25f809
Author: Sebastian Andrzej Siewior <bigeasy at linutronix.de>
Date:   Tue Oct 21 21:35:16 2008 +0200

    slurpfile: use lseek() on character nodes instead of fstat() for file size
    
    fstat() is used to determine the filesize before read() and
    it requires a filesystem. That means that it can not be used
    on character nodes. This makes it impossible to obtains the
    kernel from a char node like mtd or more likely ubi.
    We can't use this in every case because files in /proc don't
    support lseek(). This is required by the powerpc part to read
    some device-tree entries.
    
    Signed-off-by: Sebastian Andrzej Siewior <bigeasy at linutronix.de>

commit 5996651eccbffb7c195c2911f37fda2f2258e48d
Author: Chandru <chandru at in.ibm.com>
Date:   Tue Mar 2 16:09:49 2010 +0530

    kexec/kdump: RMO region does not exist in drconf memory
    
    The RMO region can only exist in '/memory at 0' node in the device tree.
    While adding support for '/ibm,dynamic-reconfiguration-memory' in
    kexec-tools, I incorrectly extended the code of '/memory@' nodes to
    drconf memory with the assumption that what applies to '/memory@'
    nodes would also apply to drconf memory. This is incorrect and
    hence removing the code from kexec-tools now.
    
    With this code in place, kexec on kexec fails. The first kexec
    works because '/memory at 0' node is read after drconf memory and
    that correctly sets rmo_base and rmo_top from '/memory at 0' node.
    While in the kexec'ed kernel, '/ibm,dynamic-reconfiguration-memory'
    is read after '/memory at xxx' nodes and this incorrectly sets both
    rmo_base and rmo_top from drconf memory.
    
    Sorry for introducing this bug.
    
    Signed-off-by: Chandru Siddalingappa <chandru at linux.vnet.ibm.com>
    Signed-off-by: Simon Horman <horms at verge.net.au>

commit 0e669a27ec55d2baaf47fdab87da08ed189b5ac6
Author: Simon Horman <horms at verge.net.au>
Date:   Thu Feb 18 11:38:09 2010 +1100

    x86_64: use correct PAGE_OFFSET
    
    This fixes a bug when using gdb with vmcore
    as explained by Dave Anderson:
    
    The kexec/arch/x86_64/crashdump-x86_64.h file contains a
    stale PAGE_OFFSET value.  In 2.6.27 it was changed from
    0xffff810000000000UL to 0xffff880000000000UL.  This is
    only a problem when using gdb with the vmlinux/vmcore
    pair, because gdb relies upon the PT_LOAD segment's p_vaddr
    values in the ELF header to be correct.
    
    Cc: Dave Anderson <anderson at redhat.com>
    Signed-off-by: Simon Horman <horms at verge.net.au>

commit 02ad89cdc85606dba57c2bca4f77ff432248d6ac
Author: Simon Horman <horms at verge.net.au>
Date:   Tue Feb 2 14:42:03 2010 +1100

    cris: cast trampoline_base
    
    # crisv32-axis-linux-gnu-gcc --version
    crisv32-axis-linux-gnu-gcc (GCC) 3.2.1 Axis release R64/1.64
    Copyright (C) 2002 Free Software Foundation, Inc.
    This is free software; see the source for copying conditions.  There is NO
    warranty; not even for MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.
    
    # make
    kexec/arch/cris/kexec-elf-cris.c: In function `elf_cris_load':
    kexec/arch/cris/kexec-elf-cris.c:134: warning: assignment makes pointer from integer without a cast
    
    Signed-off-by: Simon Horman <horms at verge.net.au>

commit 2178f71f2e77c78b7bc3d46b91b77454e016898f
Author: Simon Horman <horms at verge.net.au>
Date:   Tue Feb 2 14:42:02 2010 +1100

    arm: Initialise initrd_start in zImage_arm_load()
    
    Although the following compiler warning is bogus
    it seems harmless to initialise initrd_start to NULL.
    
    # arm-unknown-linux-gnu-gcc --version
    arm-unknown-linux-gnu-gcc (GCC) 4.1.1
    Copyright (C) 2006 Free Software Foundation, Inc.
    This is free software; see the source for copying conditions.  There is NO
    warranty; not even for MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.
    
    # make
    kexec/arch/arm/kexec-zImage-arm.c: In function 'zImage_arm_load':
    kexec/arch/arm/kexec-zImage-arm.c:135: warning: 'initrd_start' may be used
    uninitialized in this function
    
    Signed-off-by: Simon Horman <horms at verge.net.au>

commit c986de289120d449bf4d94c46c676566ccfd4202
Author: Simon Horman <horms at verge.net.au>
Date:   Tue Feb 2 14:42:02 2010 +1100

    arm: Include unistd.h for getpagesize()
    
    Signed-off-by: Simon Horman <horms at verge.net.au>

commit eb5a7cd0117e8d6d31ad8f87af4e6ce9042a3c01
Author: Simon Horman <horms at verge.net.au>
Date:   Tue Feb 2 14:42:02 2010 +1100

    sh: netbsd_booter extern qualifier should come first
    
    # sh4-unknown-linux-gnu-gcc --version
    sh4-unknown-linux-gnu-gcc (GCC) 4.1.1
    Copyright (C) 2006 Free Software Foundation, Inc.
    This is free software; see the source for copying conditions.  There is NO
    warranty; not even for MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.
    
    # make
    kexec/arch/sh/kexec-netbsd-sh.c:29: warning: 'extern' is not at beginning of declaration
    
    Signed-off-by: Simon Horman <horms at verge.net.au>

commit 9e60b0fce6e17e6a67f4b2babca1b30b3e72edcf
Author: Simon Horman <horms at verge.net.au>
Date:   Tue Feb 2 14:42:02 2010 +1100

    sh: Use size_t for zero_page_size parameter of kexec_sh_setup_zero_page()
    
    This avoids comparisons between signed and unsigned integers.
    
    Signed-off-by: Simon Horman <horms at verge.net.au>

commit 642c3e306d21a189274d8c00e15d635dfcbb2b6b
Author: Simon Horman <horms at verge.net.au>
Date:   Tue Feb 2 14:42:02 2010 +1100

    Don't discard the const qualifier of proc_iomem()
    
    Signed-off-by: Simon Horman <horms at verge.net.au>

commit 61ea8541b7ceb1782636bcaf5fab175846569bf9
Author: Simon Horman <horms at verge.net.au>
Date:   Tue Feb 2 14:42:02 2010 +1100

    ia64: move_loaded_segments: handle no matching region
    
    Apparently this never happens, but the current code seems excessively loose.
    
    1) die if it does happen
    2) initialise offset to make gcc happy.
    
    # ia64-unknown-linux-gnu-gcc --version
    ia64-unknown-linux-gnu-gcc (GCC) 3.4.5
    Copyright (C) 2004 Free Software Foundation, Inc.
    This is free software; see the source for copying conditions.  There is NO
    warranty; not even for MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.
    
    # make
    kexec/arch/ia64/kexec-elf-ia64.c: In function `move_loaded_segments':
    kexec/arch/ia64/kexec-elf-ia64.c:102: warning: 'offset' might be used
    uninitialized in this function
    
    Signed-off-by: Simon Horman <horms at verge.net.au>

commit ebadff4f150b3309938ec1779ecbd8ede871b7ac
Author: Simon Horman <horms at verge.net.au>
Date:   Tue Feb 2 14:42:02 2010 +1100

    Cast 64bit pointer to a 64bit int then a 32bit int
    
    The two-stage cast is because we really do want a 32bit integer value
    from a 64bit pointer, and gcc assumes that we're making a mistake
    if there is just one cast.
    
    # powerpc64-unknown-linux-gnu-gcc --version
    powerpc64-unknown-linux-gnu-gcc (GCC) 4.1.1
    Copyright (C) 2006 Free Software Foundation, Inc.
    This is free software; see the source for copying conditions.  There is NO
    warranty; not even for MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.
    
    # make
    kexec/arch/ppc64/kexec-elf-rel-ppc64.c: In function 'machine_apply_elf_rel':
    kexec/arch/ppc64/kexec-elf-rel-ppc64.c:66: warning: cast from pointer to integer of different size
    
    Signed-off-by: Simon Horman <horms at verge.net.au>

commit e90a4fef6966eecfc6f6fa2f3a755ac031996db1
Author: Simon Horman <horms at verge.net.au>
Date:   Tue Feb 2 14:42:02 2010 +1100

    Consistently use signed char buffers throughout
    
    Signed-off-by: Simon Horman <horms at verge.net.au>

commit 3fb7c2ba7a96ac3a76795632369464acc6c1a776
Author: Simon Horman <horms at verge.net.au>
Date:   Tue Feb 2 14:42:02 2010 +1100

    Make purgatory a signed char buffer
    
    The consumer of the purgatory buffer, elf_rel_build_load()
    expects a signed char buffer.
    
    Signed-off-by: Simon Horman <horms at verge.net.au>

commit 77ee5cf2143417ca19c1dd981abcd016579f0cd9
Author: Simon Horman <horms at verge.net.au>
Date:   Tue Feb 2 14:42:02 2010 +1100

    x86_64: initialise temp_region in exclude_region() and delete_memmap()
    
    Signed-off-by: Simon Horman <horms at verge.net.au>

commit 563ee341d950f2fae0ba6608d70c19eb647ff943
Author: Simon Horman <horms at verge.net.au>
Date:   Tue Feb 2 14:42:02 2010 +1100

    Use C99 initialisers
    
    Signed-off-by: Simon Horman <horms at verge.net.au>

commit 22b17e2d0c40d870b3cb35f95d1b4b2c7d109216
Author: Simon Horman <horms at verge.net.au>
Date:   Tue Feb 2 14:42:02 2010 +1100

    Cast when making signed/unsigned comparison in locate_hole()
    
    Signed-off-by: Simon Horman <horms at verge.net.au>

commit 7433197c7448060b2d95822ed6bee4a09532d418
Author: Simon Horman <horms at verge.net.au>
Date:   Tue Feb 2 14:42:02 2010 +1100

    unsigned values are always at least 0
    
    Signed-off-by: Simon Horman <horms at verge.net.au>

commit aa54ed4e6ade96441d73b6356eaa8e85d89970b3
Author: Simon Horman <horms at verge.net.au>
Date:   Tue Feb 2 14:42:02 2010 +1100

    Use casts to avoid ambiguity when comparing off_t and size_t
    
    Signed-off-by: Simon Horman <horms at verge.net.au>

commit 3d6c264eaa4be13208905867e31320ddc30471ae
Author: Simon Horman <horms at verge.net.au>
Date:   Tue Feb 2 14:42:02 2010 +1100

    Avoid possible overflows from signed/unsigned comparisons
    
    Signed-off-by: Simon Horman <horms at verge.net.au>

commit 48f3ad610b7098659064801f8dc9688e8795a42d
Author: Simon Horman <horms at verge.net.au>
Date:   Tue Feb 2 14:42:02 2010 +1100

    ppc: memory_range global is only used in conjunction with WITH_GAMECUBE
    
    Signed-off-by: Simon Horman <horms at verge.net.au>

commit e563dfd8f3a8ef9550722fc93ff1fc204dcb04c8
Author: Simon Horman <horms at verge.net.au>
Date:   Tue Feb 2 14:42:02 2010 +1100

    Use %llx to format mem_max as it is an unsigned long long
    
    Signed-off-by: Simon Horman <horms at verge.net.au>

commit ba8aef871c433fa8eb7c2b947b2e8e0a5d7768ba
Author: Simon Horman <horms at verge.net.au>
Date:   Tue Feb 2 14:42:02 2010 +1100

    Remove some unused variables
    
    Signed-off-by: Simon Horman <horms at verge.net.au>

commit 1fded084f180fb7b5e0613f03adae7c6e4301130
Author: Simon Horman <horms at verge.net.au>
Date:   Tue Feb 2 14:42:02 2010 +1100

    ia64: Remove unused range parameter from get_crash_memory_ranges()
    
    Signed-off-by: Simon Horman <horms at verge.net.au>

commit 33c4a0b44fa2a3966667ab1d2da775beb1ad55f2
Author: Simon Horman <horms at verge.net.au>
Date:   Tue Feb 2 14:42:02 2010 +1100

    ia64: Remove unused info parameter from add_loaded_segments_info()
    
    Signed-off-by: Simon Horman <horms at verge.net.au>

commit ff3edb39fdcba615ffdb1eba7f1d10c941aca288
Author: Simon Horman <horms at verge.net.au>
Date:   Tue Feb 2 14:42:02 2010 +1100

    ia64: Remove unused info parameter from {move,update}_loaded_segments()
    
    Signed-off-by: Simon Horman <horms at verge.net.au>

commit b6ee55c80b57b493bf738f05ada999e803f90bf6
Author: Simon Horman <horms at verge.net.au>
Date:   Tue Feb 2 14:42:02 2010 +1100

    i386: Remove unused kexec_flags parameter from setup_edd_info()
    
    Signed-off-by: Simon Horman <horms at verge.net.au>

commit b9e4dc83844c2acaee4e342583957c9fcc90d88c
Author: Simon Horman <horms at verge.net.au>
Date:   Tue Feb 2 14:42:02 2010 +1100

    sh: Remove unused len parameter from zImage_head32()
    
    Signed-off-by: Simon Horman <horms at verge.net.au>

commit 4451e6e0873631dfc4052070316b931a6896f350
Author: Simon Horman <horms at verge.net.au>
Date:   Tue Feb 2 14:42:02 2010 +1100

    sh: make zImage_head32() static
    
    Signed-off-by: Simon Horman <horms at verge.net.au>

commit 761747212962f0e60eaa8db3b8cc29ed4c5ab7a2
Author: Simon Horman <horms at verge.net.au>
Date:   Tue Feb 2 14:42:02 2010 +1100

    Remove unused parameters from build_mem() and related functions
    
    Signed-off-by: Simon Horman <horms at verge.net.au>

commit 43836a235786b40b100cc1691da9720aa9c5352d
Author: Simon Horman <horms at verge.net.au>
Date:   Tue Feb 2 14:42:02 2010 +1100

    Mark unused parameters
    
    Signed-off-by: Simon Horman <horms at verge.net.au>

commit c59af3ab34f41f259eb2f019e9f5f9ad3229893f
Author: Simon Horman <horms at verge.net.au>
Date:   Tue Feb 2 14:42:02 2010 +1100

    don't leak in concat_cmdline
    
    Cc: Eric W. Biederman <ebiederm at xmission.com>
    Signed-off-by: Simon Horman <horms at verge.net.au>

commit 8b42c99aa3bc59b877732a82e6db6380e4958b54
Author: Eric W. Biederman <ebiederm at xmission.com>
Date:   Tue Jan 19 00:05:03 2010 -0800

    Fix --reuse-cmdline so it is usable.
    
    A colleague of mine implemented kdump and it used --reuse-cmdline
    with some rather interesting and unexpected results.
    
    Update the getopt specification so that --reuse-cmdline does not
    attempt to take an argument that it will not use.
    
    Update the processing of --append so that --reuse-cmdline followed
    by --append actually appends the parameters specified by --reuse-cmdline.
    
    Signed-off-by: Eric W. Biederman <ebiederm at aristanetworks.com>

commit 1875419755e36ac49c53c166c033ed5c181287b6
Author: Paul Mundt <lethal at linux-sh.org>
Date:   Wed Dec 16 16:02:49 2009 +0900

    kexec-sh: uImage support.
    
    This follows the ARM change, and wires up uImage support on SH, with
    all of the same caveats.
    
    Signed-off-by: Paul Mundt <lethal at linux-sh.org>

commit d1faa4cbb9d771daaf624cfd016f5517b21d9dc9
Author: Paul Mundt <lethal at linux-sh.org>
Date:   Wed Dec 16 15:49:10 2009 +0900

    kexec: Bring the uImage definitions in sync with upstream.
    
    u-boot has grown support for new image/architecture/OS types, reflect
    these changes in the image.h header, thereby bringing things back in
    sync with upstream.
    
    Signed-off-by: Paul Mundt <lethal at linux-sh.org>

commit ee70425486324b5d0ca2c1c272e24aa3010d4d2a
Author: Paul Mundt <lethal at linux-sh.org>
Date:   Wed Dec 16 15:45:02 2009 +0900

    kexec: Move the uImage header to a better place.
    
    This is a completely generic header for uImage support and has no
    place being hidden away in an architecture directory. Move it up
    to the top-level include so that other architectures can trivially
    tie in uImage support, too.
    
    Signed-off-by: Paul Mundt <lethal at linux-sh.org>

commit 0f89d6658e077b043b6481af6a04715bf49472b8
Author: Huang Ying <ying.huang at intel.com>
Date:   Wed Dec 9 15:04:57 2009 +0800

    kexec jump support for x86_64
    
    x86_64 specific support, including crash memory range and purgatory setup.
    Corresponding kernel support has been merged already.
    
    Together with the kexec jump features in Linux kernel, kexec jump can
    be used for following:
    
    - A simple hibernation implementation without ACPI support. You can
      kexec a hibernating kernel, save the memory image of original system
      and shutdown the system. When resuming, you restore the memory image
      of original system via ordinary kexec load then jump back.
    
    - Kernel/system debug through making system snapshot. You can make
      system snapshot with kexec/kdump, jump back, do some thing and make
      another system snapshot.
    
    - Cooperative multi-kernel/system. With kexec jump, you can switch
      between several kernels/systems quickly without boot process except
      the first time. This appears like swap a whole kernel/system out/in.
    
    - A general method to call program in physical mode (paging turning
      off). This can be used to invoke BIOS code under Linux.
    
    Signed-off-by: Huang Ying <ying.huang at intel.com>
    Signed-off-by: Simon Horman <horms at verge.net.au>

commit 523cc35be9ba3cae86b145de5b540c5b7e3bb43f
Author: Simon Horman <horms at verge.net.au>
Date:   Mon Nov 30 16:29:08 2009 +1100

    lzma: Move the bulk of kexec-lzma.h into lzma.c
    
    There isn't any need for anything in kexec-lzma.h other
    than a declaration of zlib_decompress_file().
    
    Other being cleaner it also fixes a build problem when
    lzma support isn't being compiled in.
    
    $ make all
    i686-unknown-linux-gnu-gcc -Wall -Wextra -O2 -fomit-frame-pointer -pipe -fno-strict-aliasing -Wall -Wstrict-prototypes -I/home/horms/local/opt/crosstool/i686/gcc-3.4.5-glibc-2.3.6/i686-unknown-linux-gnu/include -I./include -I./util_lib/include -Iinclude/ -I./kexec/arch/i386/include  -c
    -MD -o kexec/kexec.o kexec/kexec.c
    In file included from kexec/kexec.c:47:
    kexec/kexec-lzma.h:8:18: lzma.h: No such file or directory
    kexec/kexec.c: In function `locate_hole':
    kexec/kexec.c:203: warning: comparison between signed and unsigned
    
    It ought to be possible to just provide a stub for zlib_decompress_file()
    in kexec-lzma.h and not compile lzma.c at all in the case where
    lzma support isn't being compiled in. However I see no obvious way
    to do this with the existing build system. So I'd like to deal
    with that as a separate possible change.
    
    Changes as suggested by Eric W. Biederman.
    
    Cc: Florian Fainelli <florian at openwrt.org>
    Cc: Eric W. Biederman <ebiederm at xmission.com>
    Signed-off-by: Simon Horman <horms at verge.net.au>

commit 4c2d9b93150d36d15bf75b050ed97cabd9a94774
Author: Florian Fainelli <florian at openwrt.org>
Date:   Thu Nov 19 00:17:22 2009 +0100

    add support for loading lzma compressed kernels
    
    This patch allows one to load a lzma compressed kernel using kexec -l.
    As I wanted the lzma code to be very similar to the existing
    zlib slurp_decompress I took lzread and associated routines
    from the cpio lzma support. Tested on my x86 laptop using the
    following commands:
    
    lzma e bzImage bzImage.lzma
    kexec -l bzImage.lzma
    
    Having lzma support is particularly useful on some embedded
    systems on which we have the kernel already lzma compressed
    and available on a mtd partition.
    
    Signed-off-by: Florian Fainelli <florian at openwrt.org>
    Signed-off-by: Simon Horman <horms at verge.net.au>

commit d61381a70a57a01b87afee90c976675f047d447d
Author: Andrea Adami <andrea.adami at gmail.com>
Date:   Fri Nov 27 21:48:08 2009 +1100

    kexec.c: workaround getline and fscanf to make it *libc agnostic. Tested against klibc and dietlibc.
    
    Based on a patch by Andrea Adami and Yuri Bushmelev
    I have:
    
    * Cleaned up indentation
    * Rearranged the logic in get_command_line()
    * Increased the buffer for reading the command line
      from 1024 to 2048 bytes as this is now possible on x86
    
    Only compile tested against glibc.
    
    Cc: Andrea Adami <andrea.adami at gmail.com>
    Cc: Yuri Bushmelev <jay4mail at gmail.com>
    Cc: Bernhard Walle <bernhard at bwalle.de>
    Signed-off-by: Simon Horman <horms at verge.net.au>

commit 5545216da4360d6494cc7ba574e04620a826a332
Author: Simon Horman <horms at verge.net.au>
Date:   Thu Nov 26 09:44:46 2009 +1100

    arm: fix architecture detection
    
    There are many variants of arm and it seems to be impractical to
    add them all to the arches array. Instead just match on the
    leading "arm" portion of the utsname.
    
    I have made this specific to arm for now, as I'm not sure what
    fallout might occur if it was made more generic. e.g. arch ppc
    matching utsname ppc64 is a concern.
    
    Based on variants of this patch submitted by Andrea Adami and
    Marc Andre Tanner, and feedback from Magnus Damm.
    
    Cc: Andrea Adami <andrea.adami at gmail.com>
    Cc: Marc Andre Tanner <mat at brain-dump.org>
    Cc: Magnus Damm <magnus.damm at gmail.com>
    Signed-off-by: Simon Horman <horms at verge.net.au>

commit 90ddba23d1abdd727aabbf1070904ae172ebb273
Author: M. Mohan Kumar <mohan at in.ibm.com>
Date:   Fri Oct 16 11:56:02 2009 +0530

    Write to HVC terminal from purgatory code
    
    Current x86/x86-64 kexec-tools print the message "I'm in purgatory" to serial
    console/VGA while executing the purgatory code.  Implement this feature for
    POWERPC pseries platform by using the H_PUT_TERM_CHAR hypervisor call by
    printng to hvc console.
    
    Includes the changes suggested by Michael Ellerman
    
    Signed-off-by: M. Mohan Kumar <mohan at in.ibm.com>
    Signed-off-by: Simon Horman <horms at verge.net.au>

commit aee54c10512b494747b03121fb0b3b1e91f63645
Author: Marc Andre Tanner <mat at brain-dump.org>
Date:   Fri Nov 20 21:07:42 2009 +0100

    kexec-arm: add uImage support
    
    uImages are basically just zImages with a special header,
    we therefore just skip the header and let the normal zImage
    infrastructure do the actual work.
    
    Signed-off-by: Marc Andre Tanner <mat at brain-dump.org>
    Signed-off-by: Simon Horman <horms at verge.net.au>

commit d06ff6009ae59c21b5549896d55445cf47894ee9
Author: Magnus Damm <damm at opensource.se>
Date:   Wed Nov 18 19:30:20 2009 +0900

    add kexec-tools support for armv7l processors
    
    Add kexec-tools support for arm processors identifying themselves
    as armv7l. This includes sh7377 and the omap3 on my beagle board.
    
    Signed-off-by: Magnus Damm <damm at opensource.se>
    Signed-off-by: Simon Horman <horms at verge.net.au>

commit 30db33c6cf26d57db28123478daaf3b6a2a51434
Author: Magnus Damm <damm at opensource.se>
Date:   Wed Nov 18 19:29:21 2009 +0900

    add kexec-tools support for armv6l processors
    
    Add kexec-tools support for arm processors identifying themselves
    as armv6l. Tested on a sh7367.
    
    Signed-off-by: Magnus Damm <damm at opensource.se>
    Signed-off-by: Simon Horman <horms at verge.net.au>

commit 15302512abb2de7f253494d3ebaae7c68bcdca3c
Author: Khalid Aziz <khalid_aziz at hp.com>
Date:   Wed Sep 9 13:16:41 2009 -0600

    Fix a problem caused by autoconf 2.64 which redefined AC_MSG_ERROR
    
    autoconf 2.64 redefined AC_MSG_ERROR and now a ";" is required at the
    end of AC_MSG_ERROR macro invocation in configure.ac. Absence of this
    ";" causes an "unexpected end of file" message when configure script
    generated by autoconf is run. This patch adds the ";" in right places. I
    have verified that configure.ac still works fine after these changes
    with autoconf 2.63 and 2.61.
    
    [horms at verge.net.au: removed trailing whitespace]
    Signed-off-by: Khalid Aziz <khalid.aziz at hp.com>
    Signed-off-by: Simon Horman <horms at verge.net.au>

commit c38ad602e15e5c7c4204d1a47e2fd1984cf98afb
Author: Hannes Reinecke <hare at suse.de>
Date:   Wed Aug 12 09:41:23 2009 +0200

    Increase kernel text size for x86_64
    
    Hi all,
    
    I cannot load a x86_64 kernel with kexec on 2.6.31; the error message is:
    
    Can't find kernel text map area from kcore
    Cannot load /boot/vmlinuz
    
    Digging through the source I found a mismatch between the assumed
    kernel text size; kexec has:
    
    #define KERNEL_TEXT_SIZE  (40UL*1024*1024)
    
    but on the kernel side we have:
    
    include/asm/page_64_types.h:
    #define KERNEL_IMAGE_SIZE   (512 * 1024 * 1024)
    
    And, indeed, changing the definition in kexec-tools to the kernel one
    fixed the problem.
    
    Not sure if this has been reported before, if so please ignore
    the noise.
    
    Cheers,
    
    Hannes
    --
    Dr. Hannes Reinecke		      zSeries & Storage
    hare at suse.de			      +49 911 74053 688
    SUSE LINUX Products GmbH, Maxfeldstr. 5, 90409 Nürnberg
    GF: Markus Rex, HRB 16746 (AG Nürnberg)
    
    Signed-off-by: Simon Horman <horms at verge.net.au>

commit 66bbafc328ddd6aea12418286b1ab9d68232f47c
Author: Simon Horman <horms at verge.net.au>
Date:   Thu Aug 13 10:33:38 2009 +1000

    kexec-tools 2.0.1-git
    
    Add -git to version so it doesn't look like a release.
    This is just so when people build code from git it can
    be identified as such from the version string.
    
    Signed-off-by: Simon Horman <horms at verge.net.au>




More information about the kexec mailing list