Question regardin intel64 arch and page table setup

[H. Peter Anvin]

On 08/11/2010 06:05 PM, Neil Horman wrote:
>
> Thanks for all the info, guys.  I hadn't considered that we couldn't access the
> 64 bit startup point for the bzImage.  I just figured we could jump to
> startup_32 + 0x200 in the bzImage header once I had the page table bit set up
> properly.
> 
> I hadn't considered the problems we might encounter with driver issues loading
> above 4gb and what have you, nor the starting of AP's.  
> 
> Regardless, I'll keep tinkering.  One more question.  When setting up the page
> table in the panic boot case, is it sufficient to setup an identity map for the
> pages in the reserved crashkernel range, or do we need to identity map the
> entire range of ram?
> 

Not clear to me.  Probably the former, but you might find problems.

Another issue: if you are planning to run SMP, the AP trampoline needs
low memory, too.

	-hpa

-- 
H. Peter Anvin, Intel Open Source Technology Center
I work for Intel.  I don't speak on their behalf.