[PATCH 1/2] kexec: add phys_offset field
Mika Westerberg
ext-mika.1.westerberg at nokia.com
Wed Apr 28 11:01:09 EDT 2010
On Wed, Apr 28, 2010 at 04:41:46PM +0200, ext Dave Anderson wrote:
>
> ----- "Mika Westerberg" <ext-mika.1.westerberg at nokia.com> wrote:
>
> > On Tue, Apr 27, 2010 at 03:08:54PM +0200, ext Dave Anderson wrote:
> > > ----- "Mika Westerberg" <ext-mika.1.westerberg at nokia.com> wrote:
> > > >
> > > > Idea here was to make sure that virtual addresses in PT_LOAD segments are
> > > > calculated correctly based on PHYS_OFFSET field. For example with OMAP3,
> > > > physical memory starts at 0x80000000 so for 0xc0000000 (PAGE_OFFSET)
> > > > we get:
> > > >
> > > > phdr->p_vaddr = 0x80000000 + 0xc0000000 = 0x40000000
> > > >
> > > > which is not correct. But taking PHYS_OFFSET into equation we get
> > > >
> > > > phdr->p_vaddr = 0x80000000 + 0xc0000000 - 0x80000000 = 0xc0000000
> > > >
> > > > which is correct.
> > >
> > > Yes, I understand completely -- we've been there... ;-)
> > >
> > > The issue is that there would be a disconnect between the actual kernel
> > > virtual addresses used in the vmlinux file vs. your "calculated" virtual
> > > addresses in the header, and to me that goes against the grain of what
> > > the p_vaddr field is supposed to mean.
> > >
> > > The ELF spec defines them:
> > >
> > > p_vaddr This member gives the virtual address at which the first
> > > byte of the segment resides in memory.
> > >
> > > p_paddr On systems for which physical addressing is relevant, this
> > > member is reserved for the segment's physical address.
> > > Because System V ignores physical addressing for application
> > > programs, this member has unspecified contents for executable
> > > files and shared objects.
> > >
> > > To me, the term "virtual address" means the virtual addresses used by the
> > > executable. Your scheme "calculates" a p_vaddr based upon the p_paddr.
> >
> > Sorry, I have to ask some clarifications to understand this.
> >
> > If the kernel image is linked at virtual address 0xc0008000 which is the case
> > with ARM kernel for example. Then how following is legitimate kernel virtual
> > address?
> >
> > phdr->p_vaddr = mstart + elf_info->page_offset;
> >
> > if the first physical memory region starts for example at 0x80000000, and
> > PAGE_OFFSET is 0xc0000000 we get:
> >
> > phdr->p_vaddr = 0x80000000 + 0xc0000000
> >
> > this results virtual address 0x40000000 (in 32-bit) for the kernel direct mapped
> > region, which I think is not the same as used by the executable (the vmlinux
> > file):
> >
> > % objdump -h vmlinux
> >
> > vmlinux: file format elf32-little
> >
> > Sections:
> > Idx Name Size VMA LMA File off Algn
> > 0 .note.gnu.build-id 00000024 00000000 00000000 00008000 2**2
> > CONTENTS, ALLOC, LOAD, READONLY, DATA
> > 1 .init 0001f6ed c0008000 c0008000 00010000 2**5
> > CONTENTS, ALLOC, LOAD, CODE
> > 2 .text 0031706a c0028000 c0028000 00030000 2**6
> > CONTENTS, ALLOC, LOAD, READONLY, CODE
> > ...
> >
> > Am I missing something?
>
> I may be missing something w/respect to 32-bit x86, but AIUI, the
> unity-mapped region can only map the first 1GB of physical memory,
> starting at physical address 0. So you couldn't do what you suggest,
> i.e., where the resultant unity-mapped address wraps around into
> the user-space region.
Yeah, but this is what happens with the current code :(
>
> But for x86, their is no concept of a mapped kernel region in addition
> to the unity-mapped region(s), as there is with x86_64 and ia64. It's
> presumed that the primary kernel is based at physical adress 0, so when
> the PAGE_OFFSET is stripped off, you have the physical address.
With ARM we have (for the kernel direct mapped region):
paddr = vaddr - PAGE_OFFSET + PHYS_OFFSET
so it is related to PHYS_OFFSET.
Is there any (other) way of doing this so that we could get p_vaddr correct? I
checked makedumpfile but it seems not to handle p_vaddr at all so it probably
won't help if we run the dump through it.
Thanks,
MW
More information about the kexec
mailing list