random: Trying to read entropy from /dev/random Configuration file: /etc/hostapd/hostapd.conf ctrl_interface_group=0 rfkill: initial event: idx=0 type=1 op=0 soft=0 hard=0 rfkill: initial event: idx=1 type=1 op=0 soft=0 hard=0 nl80211: Supported cipher 00-0f-ac:1 nl80211: Supported cipher 00-0f-ac:5 nl80211: Supported cipher 00-0f-ac:2 nl80211: Supported cipher 00-0f-ac:4 nl80211: Using driver-based off-channel TX nl80211: interface wlan1 in phy phy0 nl80211: Set mode ifindex 4 iftype 3 (AP) nl80211: Setup AP(wlan1) - device_ap_sme=1 use_monitor=1 nl80211: Enable Probe Request reporting nl_preq=0x1700190 nl80211: Register frame type=0x40 (WLAN_FC_STYPE_PROBE_REQ) nl_handle=0x1700190 match= nl80211: Add own interface ifindex 4 nl80211: if_indices[16]: 4 phy: phy0 BSS count 1, BSSID mask 00:00:00:00:00:00 (0 bits) nl80211: Regulatory information - country=FR (DFS-ETSI) nl80211: 2402-2482 @ 40 MHz 20 mBm nl80211: 5170-5250 @ 80 MHz 20 mBm nl80211: 5250-5330 @ 80 MHz 20 mBm (DFS) nl80211: 5490-5710 @ 160 MHz 27 mBm (DFS) nl80211: 57000-66000 @ 2160 MHz 40 mBm nl80211: Added 802.11b mode based on 802.11g information Allowed channel: mode=1 chan=1 freq=2412 MHz max_tx_power=20 dBm Allowed channel: mode=1 chan=2 freq=2417 MHz max_tx_power=20 dBm Allowed channel: mode=1 chan=3 freq=2422 MHz max_tx_power=20 dBm Allowed channel: mode=1 chan=4 freq=2427 MHz max_tx_power=20 dBm Allowed channel: mode=1 chan=5 freq=2432 MHz max_tx_power=20 dBm Allowed channel: mode=1 chan=6 freq=2437 MHz max_tx_power=20 dBm Allowed channel: mode=1 chan=7 freq=2442 MHz max_tx_power=20 dBm Allowed channel: mode=1 chan=8 freq=2447 MHz max_tx_power=20 dBm Allowed channel: mode=1 chan=9 freq=2452 MHz max_tx_power=20 dBm Allowed channel: mode=1 chan=10 freq=2457 MHz max_tx_power=20 dBm Allowed channel: mode=1 chan=11 freq=2462 MHz max_tx_power=20 dBm Allowed channel: mode=1 chan=12 freq=2467 MHz max_tx_power=20 dBm Allowed channel: mode=1 chan=13 freq=2472 MHz max_tx_power=20 dBm Allowed channel: mode=2 chan=36 freq=5180 MHz max_tx_power=20 dBm Allowed channel: mode=2 chan=38 freq=5190 MHz max_tx_power=20 dBm Allowed channel: mode=2 chan=40 freq=5200 MHz max_tx_power=20 dBm Allowed channel: mode=2 chan=42 freq=5210 MHz max_tx_power=20 dBm Allowed channel: mode=2 chan=44 freq=5220 MHz max_tx_power=20 dBm Allowed channel: mode=2 chan=46 freq=5230 MHz max_tx_power=20 dBm Allowed channel: mode=2 chan=48 freq=5240 MHz max_tx_power=20 dBm Allowed channel: mode=0 chan=1 freq=2412 MHz max_tx_power=20 dBm Allowed channel: mode=0 chan=2 freq=2417 MHz max_tx_power=20 dBm Allowed channel: mode=0 chan=3 freq=2422 MHz max_tx_power=20 dBm Allowed channel: mode=0 chan=4 freq=2427 MHz max_tx_power=20 dBm Allowed channel: mode=0 chan=5 freq=2432 MHz max_tx_power=20 dBm Allowed channel: mode=0 chan=6 freq=2437 MHz max_tx_power=20 dBm Allowed channel: mode=0 chan=7 freq=2442 MHz max_tx_power=20 dBm Allowed channel: mode=0 chan=8 freq=2447 MHz max_tx_power=20 dBm Allowed channel: mode=0 chan=9 freq=2452 MHz max_tx_power=20 dBm Allowed channel: mode=0 chan=10 freq=2457 MHz max_tx_power=20 dBm Allowed channel: mode=0 chan=11 freq=2462 MHz max_tx_power=20 dBm Allowed channel: mode=0 chan=12 freq=2467 MHz max_tx_power=20 dBm Allowed channel: mode=0 chan=13 freq=2472 MHz max_tx_power=20 dBm Completing interface initialization Mode: IEEE 802.11a Channel: 36 Frequency: 5180 MHz DFS 0 channels required radar detection Could not set channel for kernel driver Interface initialization failed wlan1: interface state UNINITIALIZED->DISABLED wlan1: AP-DISABLED wlan1: Unable to setup interface. hostapd_interface_deinit_free(0x16fd440) hostapd_interface_deinit_free: num_bss=1 conf->num_bss=1 hostapd_interface_deinit(0x16fd440) wlan1: interface state DISABLED->DISABLED hostapd_bss_deinit: deinit bss wlan1 wlan1: Deauthenticate all stations nl80211: sta_remove -> DEL_STATION wlan1 ff:ff:ff:ff:ff:ff --> -22 (Invalid argument) wlan1: AP-DISABLED hostapd_cleanup(hapd=0x16ff700 (wlan1)) hostapd_free_hapd_data: Interface wlan1 wasn't started hostapd_interface_deinit_free: driver=0x8a91c drv_priv=0x1700080 -> hapd_deinit nl80211: deinit ifname=wlan1 disabled_11b_rates=0 nl80211: Disable Probe Request reporting nl_preq=0x89f88919 nl80211: Remove monitor interface: refcount=0 nl80211: Remove beacon (ifindex=4) netlink: Operstate: ifindex=4 linkmode=0 (kernel-control), operstate=6 (IF_OPER_UP) nl80211: Set mode ifindex 4 iftype 2 (STATION) nl80211: Teardown AP(wlan1) - device_ap_sme=1 use_monitor=1 hostapd_interface_free(0x16fd440) hostapd_interface_free: free hapd 0x16ff700 hostapd_cleanup_iface(0x16fd440) hostapd_cleanup_iface_partial(0x16fd440) hostapd_cleanup_iface: free iface=0x16fd440