wpa_supplicant: MLO association fails on NO-EHT channels with Intel BE201
IAmVery OK
adolphpi at outlook.com
Sun Nov 22 06:00:33 PST 2026
Hi Hostap maintainers,
I'm following up on Linux kernel Bugzilla #222244 at Emmanuel
Grumbach's suggestion:
https://bugzilla.kernel.org/show_bug.cgi?id=222244
On an ONEXPLAYER X2 Mini with Intel BE201 (8086:e440),
wpa_supplicant 2.12 fails to connect to an MLO-capable Huawei AP
using SAE when the effective CN regulatory rules mark the 2.4 GHz
and 5 GHz channels NO-EHT. I expected the connection to fall back
to single-link HE without changing the regulatory rules.
I compared unpatched 2.12 with the same build plus Emmanuel's
candidate patch (Bugzilla attachment 311406, backported to 2.12).
Both were tested on kernel 7.3.3-1-cachyos-deckify with Intel
firmware 107.1b444747.0, using the same AP and SAE credentials:
- Unpatched, disable_11be=0: association failed. The kernel logged
"Rejecting MLO as it is not supported by AP".
- Patched, disable_11be=0: 3/3 reconnects succeeded at 2462 MHz
and 3/3 at 5220 MHz. Both used SAE/CCMP and HE. The CN rules
remained unchanged.
- Unpatched, disable_11be=1: association succeeded using HE.
Sanitized logs and the exact 2.12 backport are in Bugzilla
attachment 311407. I have not tested Hostap main.
Is there already a public review thread for this fix? I can retest
an upstream revision on the same hardware and AP.
Thanks,
JiaJun Leng
More information about the Hostap
mailing list