July 2025 Archives by thread

• Messages sorted by: [ subject ] [ author ] [ date ]
• More info on this list...

Starting: Sun Jul 6 10:01:31 PDT 2025
Ending: Thu Jul 31 06:57:03 PDT 2025
Messages: 56

• [PATCH] Check if a global NL80211 event is directed to a bridged interface before ignoring   Felix Fietkau
• AP doesn't work at 5 GHz after upgrading hostapd from 2.10 to 2.11   Antony Kolitsos
• [PATCH] OpenSSL: Use SSL_CTX_flush_sessions_ex() on >=v3.4   Andre Heider
• [PATCH] IKEv2: Add support for null encryption   Domenico Verde
• [PATCH 1/1] Fix NAN USD state machine stall seen with listen failure.   Ajay Davanageri
  • [PATCH 1/1] Fix NAN USD state machine stall seen with listen failure.   Ajay Davanageri
• BPCC in per-STA profile in link reconfiguration response   Johannes Berg
  • BPCC in per-STA profile in link reconfiguration response   Mohan Kumar G
  • BPCC in per-STA profile in link reconfiguration response   Johannes Berg
• wpa_supplicant triggers macsec_newlink without config data for hardware offload module   B
  • wpa_supplicant triggers macsec_newlink without config data for hardware offload module   B
• Raising DEFAULT_BSS_MAX_COUNT   Mitchell Augustin
  • Raising DEFAULT_BSS_MAX_COUNT   Johannes Berg
    • Raising DEFAULT_BSS_MAX_COUNT   Mitchell Augustin
• [PATCH] tests: add a test to check various MLD AP startup combination   Benjamin Berg
• [PATCH 0/9] Some BTM fixes and MLD support   Benjamin Berg
  • [PATCH 1/9] nl80211: log offset and attribute type for nl80211 errors   Benjamin Berg
  • [PATCH 2/9] nl80211: Support scanning as AP   Benjamin Berg
  • [PATCH 3/9] nl80211: Don't try to scan on AP interface with active links   Benjamin Berg
  • [PATCH 4/9] WNM: Avoid staying on a BSS if it is being terminated   Benjamin Berg
  • [PATCH 5/9] WNM: Stop scan handling after BTM failure   Benjamin Berg
  • [PATCH 6/9] WNM: Implement ML handling of neighbor report entries   Benjamin Berg
  • [PATCH 7/9] tests: Split out 5 GHz parameter generation   Benjamin Berg
  • [PATCH 8/9] tests: Add test for matching ML neighbor entries   Benjamin Berg
  • [PATCH 9/9] tests: Check that BSS termination excludes the current BSS   Benjamin Berg
• [PATCH] tests: test reassociation with swapped assoc link   Benjamin Berg
• [PATCH] wolfssl: treat !data->in_data as a WANT_READ   Juliusz Sosinowicz
• [PATCH] Ignore RSNX IE if the scan result does not contain one.   Stefan Dösinger
• [PATCH] AP MLD: handle link_id for EVENT_RX_FROM_UNKNOWN   Michael-CY Lee
• [PATCH] tests: enable setting from outside the build directory   Benjamin Berg
• [PATCH] test: dbus: Unregister timeout source at end of test   Benjamin Berg
• [PATCH] Bump DEFAULT_BSS_MAX_COUNT to 1000   Mitchell Augustin
• [PATCH] wpa_supplicant: Bump DEFAULT_BSS_MAX_COUNT to 1000   Mitchell Augustin
• [PATCH] nl80211: Send RTM_SETLINK to the correct interface for extra BSSs   Rafał Miłecki
• [PATCH] RRM: Don't request LCI and civic if not supported   Benjamin Berg
• [PATCH 1/2] Add get function for global bgscan value   Clemens Famulla-Conrad
  • [PATCH 2/2] Add get function for global freq_list value   Clemens Famulla-Conrad
• [PATCH] SME: Add configurable driver processing time   Chaitanya Tata
• [PATCH] wpa_supplicant: document disable_he parameter in wpa_supplicant.conf   Pablo MARTIN-GOMEZ
• RRM Beacon Report Issues w/ Channel Widths Larger than 40MHz   Alex Gavin
• [PATCH v3 1/3] eloop: dump a trace when exiting due to SIGALRM   Benjamin Berg
  • [PATCH v3 2/3] tests: vm: hide /var and /run entirely   Benjamin Berg
  • [PATCH v3 3/3] nl80211: wait on udev when creating new device   Benjamin Berg
• [PATCH] RRM: do not set DELAYED_BA & IMM_BA bits in neighbor report   Pablo MG
• [PATCH 1/2] nl80211: fix wrong NL80211_ATTR_WPA_VERSIONS value set for the WPA3-SAE AP   Gokul Sivakumar
  • [PATCH 2/2] WPA: fix PROTO field being printed incorrectly as WPA VERSION in debug logs   Gokul Sivakumar
• [PATCH 1/2] BSS: permit falling back to RSNOE for MLO   Benjamin Berg
  • [PATCH 2/2] BSS: do proper fallback for RSNOE2/RSNOE/RSNE during MLD checking   Benjamin Berg
• [PATCH 0/7] Hi,   Benjamin Berg
  • [PATCH 1/7] ap: create hostapd_parse_freq_params()   Benjamin Berg
  • [PATCH 2/7] ap: create hostapd_chan_width_from_freq_params   Benjamin Berg
  • [PATCH 3/7] ap: support BW changes via CLI   Benjamin Berg
  • [PATCH 4/7] AP: Always verify and fix channel switch configuration   Benjamin Berg
  • [PATCH 5/7] AP: Configure channel switch in ap_switch_channel   Benjamin Berg
  • [PATCH 6/7] tests: Ensure chan_switch tests receive a beacon after switch   Benjamin Berg
  • [PATCH 7/7] AP: Avoid disabling HT/VHT/HE/EHT during CSA   Benjamin Berg

Last message date: Thu Jul 31 06:57:03 PDT 2025
Archived on: Thu Jul 31 07:39:02 PDT 2025

• Messages sorted by: [ subject ] [ author ] [ date ]
• More info on this list...