ACS: Validate 6 GHz AP criteria before ACS

[e9hack]

The call of hostapd_config_check_bss_6g() is called from
hostapd_get_hw_mode_any_channels(). The AP's are configured for
wpa_key_mgmt=WPA-EAP WPA-EAP-SHA256
wpa_key_mgmt=WPA-PSK SAE WPA-PSK-SHA256
wpa_key_mgmt=WPA-PSK SAE
wpa_key_mgmt=WPA-EAP WPA-EAP-SHA256 FILS-SHA256

Management frame protection is set to
ieee80211w=1
sae_require_mfp=1

It would be nice, if at least the interface name is printed and if the
number of messages is limited.

Regards,
Hartmut

Am Sa., 12. Apr. 2025 um 15:20 Uhr schrieb e9hack <e9hack at gmail.com>:
>
> Something is strange in commit
> 02a8d40c9ffb2987c291ea96cf7be7c012b359a3. I'm using an AX router
> without a 6GHz band. Now I get ~10 messages per second like this: Sat
> Apr 12 14:37:32 2025 daemon.err hostapd: Management frame protection
> is required in 6 GHz
>
> Regards,
> Hartmut