Can't get WPA3 to work...

[rany]

It appears that, at least according to this Cisco help page:
https://documentation.meraki.com/MR/Wi-Fi_Basics_and_Best_Practices/WPA3_Encryption_and_Configuration_Guide#WPA3_192-bit
that only WPA3-EAP 192-bit has this restriction and I could confirm it 
from my own testing.

All the WPA3-EAP (including when not setting the WPA3-192-bit)options do 
not work on my devices.

I tried on both my Android and iPhone and while I do get the 
username/password prompt,
it claims I inputted the wrong password.

On 5/19/23 22:53, Alan DeKok wrote:
> On May 19, 2023, at 11:29 AM, Robert Senger <robert.senger at lists.microscopium.de> wrote:
>> I just wonder why you say that WPA3-EAP only supports certificate based
>> authentication, which means eap=tls in my understanding. I found that
>> WPA3-EAP works well with username/password based authentication, e.g.
>> eap=ttls, the same way as WPA2-EAP does.
>    There is no way it supports "only" certificate-based authentication.  That isn't how EAP works.
>
>    Any EAP method should work, so long as the method provides the encryption keys sent in RADIUS as MS-MPPE-*-Key.
>
>    Alan DeKok.
>
>
> _______________________________________________
> Hostap mailing list
> Hostap at lists.infradead.org
> http://lists.infradead.org/mailman/listinfo/hostap