[PATCH] QOS MAP: Change configuration to be per bss, not radio

[Arnon Meydav]

From: Eran Gonen <egonen at maxlinear.com>

Previously the NL80211_CMD_SET_QOS_MAP command was sent to the radio interface.
Send this command using nl80211_cmd_msg and the bss, instead of drv.

Signed-off-by: Arnon Meydav <ameydav at maxlinear.com>
---
 src/drivers/driver_nl80211.c | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

diff --git a/src/drivers/driver_nl80211.c b/src/drivers/driver_nl80211.c
index e4180daed..76374f5bf 100644
--- a/src/drivers/driver_nl80211.c
+++ b/src/drivers/driver_nl80211.c
@@ -11300,7 +11300,7 @@ static int nl80211_set_qos_map(void *priv, const u8 *qos_map_set,
        wpa_hexdump(MSG_DEBUG, "nl80211: Setting QoS Map",
                    qos_map_set, qos_map_set_len);

-       if (!(msg = nl80211_drv_msg(drv, 0, NL80211_CMD_SET_QOS_MAP)) ||
+       if (!(msg = nl80211_cmd_msg(bss, 0, NL80211_CMD_SET_QOS_MAP)) ||
            nla_put(msg, NL80211_ATTR_QOS_MAP, qos_map_set_len, qos_map_set)) {
                nlmsg_free(msg);
                return -ENOBUFS;
--
2.17.1