[PATCH v2 11/17] MLD STA: Indicate AP MLD address in CTRL-EVENT-CONNECTED

[Veerendranath Jakkam]

From: Aleti Nageshwar Reddy <quic_anageshw at quicinc.com>

Append AP MLD address to CTRL-EVENT-CONNECTED when current connection
is MLO connection.

Signed-off-by: Aleti Nageshwar Reddy <quic_anageshw at quicinc.com>
---
 wpa_supplicant/ctrl_iface.c     | 13 +++++++++++--
 wpa_supplicant/wpa_supplicant.c | 11 +++++++++--
 2 files changed, 20 insertions(+), 4 deletions(-)

diff --git a/wpa_supplicant/ctrl_iface.c b/wpa_supplicant/ctrl_iface.c
index 6731124ed..a60da649e 100644
--- a/wpa_supplicant/ctrl_iface.c
+++ b/wpa_supplicant/ctrl_iface.c
@@ -2537,12 +2537,21 @@ static int wpa_supplicant_ctrl_iface_status(struct wpa_supplicant *wpa_s,
 					  wpa_s->current_ssid->ssid_len) : "");
 		if (wpa_s->wpa_state == WPA_COMPLETED) {
 			struct wpa_ssid *ssid = wpa_s->current_ssid;
+			char mld_addr[50];
+
+			mld_addr[0] = '\0';
+			if (wpa_s->valid_links)
+				os_snprintf(mld_addr, sizeof(mld_addr),
+					    " ap_mld_addr=" MACSTR,
+					    MAC2STR(wpa_s->ap_mld_addr));
+
 			wpa_msg_ctrl(wpa_s, MSG_INFO, WPA_EVENT_CONNECTED
 				     "- connection to " MACSTR
-				     " completed %s [id=%d id_str=%s]",
+				     " completed %s [id=%d id_str=%s]%s",
 				     MAC2STR(wpa_s->bssid), "(auth)",
 				     ssid ? ssid->id : -1,
-				     ssid && ssid->id_str ? ssid->id_str : "");
+				     ssid && ssid->id_str ? ssid->id_str : "",
+				     mld_addr);
 		}
 	}
 #endif /* ANDROID */
diff --git a/wpa_supplicant/wpa_supplicant.c b/wpa_supplicant/wpa_supplicant.c
index deb51a721..8d9228874 100644
--- a/wpa_supplicant/wpa_supplicant.c
+++ b/wpa_supplicant/wpa_supplicant.c
@@ -985,6 +985,13 @@ void wpa_supplicant_set_state(struct wpa_supplicant *wpa_s,
 	if (state == WPA_COMPLETED && wpa_s->new_connection) {
 		struct wpa_ssid *ssid = wpa_s->current_ssid;
 		int fils_hlp_sent = 0;
+		char mld_addr[50];
+
+		mld_addr[0] = '\0';
+		if (wpa_s->valid_links)
+			os_snprintf(mld_addr, sizeof(mld_addr),
+				    " ap_mld_addr=" MACSTR,
+				    MAC2STR(wpa_s->ap_mld_addr));
 
 #ifdef CONFIG_SME
 		if ((wpa_s->drv_flags & WPA_DRIVER_FLAGS_SME) &&
@@ -997,11 +1004,11 @@ void wpa_supplicant_set_state(struct wpa_supplicant *wpa_s,
 
 #if defined(CONFIG_CTRL_IFACE) || !defined(CONFIG_NO_STDOUT_DEBUG)
 		wpa_msg(wpa_s, MSG_INFO, WPA_EVENT_CONNECTED "- Connection to "
-			MACSTR " completed [id=%d id_str=%s%s]",
+			MACSTR " completed [id=%d id_str=%s%s]%s",
 			MAC2STR(wpa_s->bssid),
 			ssid ? ssid->id : -1,
 			ssid && ssid->id_str ? ssid->id_str : "",
-			fils_hlp_sent ? " FILS_HLP_SENT" : "");
+			fils_hlp_sent ? " FILS_HLP_SENT" : "", mld_addr);
 #endif /* CONFIG_CTRL_IFACE || !CONFIG_NO_STDOUT_DEBUG */
 		wpas_clear_temp_disabled(wpa_s, ssid, 1);
 		wpa_s->consecutive_conn_failures = 0;
-- 
2.25.1