[PATCH 1/2] wpa_supplicant: Support throughput estimation for EHT rates

[Jouni Malinen]

On Wed, Nov 30, 2022 at 05:02:46PM +0200, Andrei Otcheretianski wrote:
> Add support to consider EHT rates while calculating the estimated
> throughput for scan results.
> 
> - The estimated EHT throughput uses the HE 0.8 usec GI rates from the
>   relevant EHT-MCS tables from section 36.5 in Draft P802.11be_D2.0.
> - The minimum SNR values for EHT rates (4096-QAM) are derived by adding
>   the existing minimum SNR values of 1024-QAM rates from HE tables and
>   the difference between the values of minimum sensitivity levels of
>   1024-QAM rates and 4096-QAM rates defined in Table 36-67 (Receiver
>   minimum input level sensitivity) in IEEE P802.11be_D2.0.

Thanks, both patches applied.
 
-- 
Jouni Malinen                                            PGP id EFC895FA