[PATCH 04/13] nl80211: Add support for MLD authentication

[Andrei Otcheretianski]

From: Ilan Peer <ilan.peer at intel.com>

Set MLO attributes for NL80211_CMD_AUTHENTICATE and make sure that MLD
configuration is preserved between authentication retries.

Signed-off-by: Johannes Berg <johannes.berg at intel.com>
Signed-off-by: Ilan Peer <ilan.peer at intel.com>
---
 src/drivers/driver_nl80211.c | 24 ++++++++++++++++++++++++
 src/drivers/driver_nl80211.h |  3 +++
 2 files changed, 27 insertions(+)

diff --git a/src/drivers/driver_nl80211.c b/src/drivers/driver_nl80211.c
index 86d5dd862a..89c2a03e7c 100644
--- a/src/drivers/driver_nl80211.c
+++ b/src/drivers/driver_nl80211.c
@@ -278,6 +278,10 @@ void nl80211_mark_disconnected(struct wpa_driver_nl80211_data *drv)
 	os_free(drv->pending_roam_data);
 	drv->pending_roam_data = NULL;
 #endif /* CONFIG_DRIVER_NL80211_QCA */
+
+	drv->auth_mld = 0;
+	drv->auth_mld_link_id = -1;
+	os_memset(drv->auth_ap_mld_addr, 0, ETH_ALEN);
 }
 
 
@@ -3781,6 +3785,12 @@ static void nl80211_copy_auth_params(struct wpa_driver_nl80211_data *drv,
 		}
 	}
 
+	if (params->mld) {
+		drv->auth_mld = params->mld;
+		drv->auth_mld_link_id = params->mld_link_id;
+		os_memcpy(drv->auth_ap_mld_addr, params->ap_mld_addr, ETH_ALEN);
+	}
+
 	os_free(drv->auth_data);
 	drv->auth_data = NULL;
 	drv->auth_data_len = 0;
@@ -3944,6 +3954,17 @@ retry:
 			goto fail;
 	}
 
+	if (params->mld && params->ap_mld_addr) {
+		wpa_printf(MSG_DEBUG, "  * MLD: link_id=%u, MLD addr=" MACSTR,
+			   params->mld_link_id, MAC2STR(params->ap_mld_addr));
+
+		if (nla_put_u8(msg, NL80211_ATTR_MLO_LINK_ID,
+			       params->mld_link_id) ||
+		    nla_put(msg, NL80211_ATTR_MLD_ADDR, ETH_ALEN,
+			    params->ap_mld_addr))
+			goto fail;
+	}
+
 	ret = send_and_recv_msgs(drv, msg, NULL, NULL, NULL, NULL);
 	msg = NULL;
 	if (ret) {
@@ -4047,6 +4068,9 @@ int wpa_driver_nl80211_authenticate_retry(struct wpa_driver_nl80211_data *drv)
 	params.ie_len = drv->auth_ie_len;
 	params.auth_data = drv->auth_data;
 	params.auth_data_len = drv->auth_data_len;
+	params.mld = drv->auth_mld;
+	params.mld_link_id = drv->auth_mld_link_id;
+	params.ap_mld_addr = drv->auth_ap_mld_addr;
 
 	for (i = 0; i < 4; i++) {
 		if (drv->auth_wep_key_len[i]) {
diff --git a/src/drivers/driver_nl80211.h b/src/drivers/driver_nl80211.h
index 0b8b0ce118..943b8d8813 100644
--- a/src/drivers/driver_nl80211.h
+++ b/src/drivers/driver_nl80211.h
@@ -224,6 +224,9 @@ struct wpa_driver_nl80211_data {
 	int auth_wep_tx_keyidx;
 	int auth_local_state_change;
 	int auth_p2p;
+	bool auth_mld;
+	u8 auth_mld_link_id;
+	u8 auth_ap_mld_addr[ETH_ALEN];
 
 	/*
 	 * Tells whether the last scan issued from wpa_supplicant was a normal
-- 
2.25.1