[PATCH v3 00/15] mesh: enable DFS channels in mesh mode

[peter.oh at bowerswilkins.com]

From: Peter Oh <peter.oh at bowerswilkins.com>

This patchset enables DFS channels in mesh mode along with
CAC and channel switch.
It's been verified that works for non-dfs channels, dfs channels,
w/wo encryption (none and SAE), radar detection, channel switch,
and mesh re-association after channel switch.
Only left area to cover is in the case when multiple mesh points
detect radar at the same time, but they select different channels.
To cover the case I think we need a private patch for it,
because current 802.11s standard does not address it how to handle.

* v2: corrected wrong sender's email
* v3: rebased on top of "mesh: Properly handle sae_password"
      fix compiler warnings on unused variables and parentheses

Peter Oh (15):
  mesh: factor out mesh join function
  mesh: factor out rsn initialization
  mesh: relocate RSN init function
  mesh: use setup completion callback to complete mesh join
  mesh: reflect country setting to mesh configuration
  mesh: inform kernel driver DFS handler in userspace
  mesh: apply channel attributes before running Mesh
  mesh: set interface type to mesh before setting interface
  mesh: set mesh center frequency
  mesh: consider mesh interface on dfs event handler
  mesh: Allow DFS channels to be selected if dfs is enabled
  mesh: allow mesh to send channel switch request
  mesh: do not allow pri/sec channel switch
  mesh: do not allow scan result to swap pri/sec
  mesh: do not use offchan mgmt tx on DFS

 src/drivers/driver.h              |   1 +
 src/drivers/driver_nl80211.c      |  11 +-
 wpa_supplicant/ap.c               |  71 +++++++++---
 wpa_supplicant/events.c           |   1 +
 wpa_supplicant/mesh.c             | 236 ++++++++++++++++++++++----------------
 wpa_supplicant/mesh.h             |   2 +
 wpa_supplicant/wpa_supplicant.c   |  26 +++--
 wpa_supplicant/wpa_supplicant_i.h |   1 +
 8 files changed, 226 insertions(+), 123 deletions(-)

-- 
2.7.4