[PATCH 01/15] mesh: factor out mesh join function
peter.oh at bowerswilkins.com
peter.oh at bowerswilkins.com
Thu Apr 12 02:35:14 PDT 2018
From: Peter Oh <poh at qca.qualcomm.com>
mesh join function consitss of 2 parts which are preparing
configurations and sending join event to driver.
Since physical mesh join event could happen either right
after mesh configuration is done or after CAC is done
in case of DFS channel is used, factor out the function
into 2 parts to reduce redundant calls.
Signed-off-by: Peter Oh <poh at qca.qualcomm.com>
---
wpa_supplicant/mesh.c | 120 +++++++++++++++++++++-----------------
wpa_supplicant/mesh.h | 1 +
wpa_supplicant/wpa_supplicant_i.h | 1 +
3 files changed, 68 insertions(+), 54 deletions(-)
diff --git a/wpa_supplicant/mesh.c b/wpa_supplicant/mesh.c
index c0c8f9131..f2f417dca 100644
--- a/wpa_supplicant/mesh.c
+++ b/wpa_supplicant/mesh.c
@@ -25,6 +25,7 @@
#include "mesh_mpm.h"
#include "mesh_rsn.h"
#include "mesh.h"
+#include "drivers/driver_nl80211.h"
static void wpa_supplicant_mesh_deinit(struct wpa_supplicant *wpa_s)
@@ -359,13 +360,48 @@ void wpa_supplicant_mesh_add_scan_ie(struct wpa_supplicant *wpa_s,
}
+void wpas_join_mesh(struct wpa_supplicant *wpa_s)
+{
+ struct wpa_driver_mesh_join_params *params = wpa_s->mesh_params;
+ struct wpa_ssid *ssid = wpa_s->current_ssid;
+ int ret = 0;
+
+ if (ssid->key_mgmt & WPA_KEY_MGMT_SAE) {
+ wpa_s->pairwise_cipher = wpa_s->mesh_rsn->pairwise_cipher;
+ wpa_s->group_cipher = wpa_s->mesh_rsn->group_cipher;
+ wpa_s->mgmt_group_cipher = wpa_s->mesh_rsn->mgmt_group_cipher;
+ }
+
+ if (wpa_s->ifmsh) {
+ params->ies = wpa_s->ifmsh->mconf->rsn_ie;
+ params->ie_len = wpa_s->ifmsh->mconf->rsn_ie_len;
+ params->basic_rates = wpa_s->ifmsh->basic_rates;
+ params->conf.flags |= WPA_DRIVER_MESH_CONF_FLAG_HT_OP_MODE;
+ params->conf.ht_opmode = wpa_s->ifmsh->bss[0]->iface->ht_op_mode;
+ }
+
+ ret = wpa_drv_join_mesh(wpa_s, params);
+ if (ret)
+ wpa_msg(wpa_s, MSG_ERROR, "mesh join error=%d\n", ret);
+
+ /* hostapd sets the interface down until we associate */
+ wpa_drv_set_operstate(wpa_s, 1);
+
+ if (!ret)
+ wpa_supplicant_set_state(wpa_s, WPA_COMPLETED);
+
+ return;
+}
+
+
int wpa_supplicant_join_mesh(struct wpa_supplicant *wpa_s,
struct wpa_ssid *ssid)
{
- struct wpa_driver_mesh_join_params params;
+ struct wpa_driver_mesh_join_params *params =
+ os_zalloc(sizeof(struct wpa_driver_mesh_join_params));
int ret = 0;
- if (!ssid || !ssid->ssid || !ssid->ssid_len || !ssid->frequency) {
+ if (!ssid || !ssid->ssid || !ssid->ssid_len || !ssid->frequency || !params) {
ret = -ENOENT;
goto out;
}
@@ -376,22 +412,22 @@ int wpa_supplicant_join_mesh(struct wpa_supplicant *wpa_s,
wpa_s->group_cipher = WPA_CIPHER_NONE;
wpa_s->mgmt_group_cipher = 0;
- os_memset(¶ms, 0, sizeof(params));
- params.meshid = ssid->ssid;
- params.meshid_len = ssid->ssid_len;
- ibss_mesh_setup_freq(wpa_s, ssid, ¶ms.freq);
- wpa_s->mesh_ht_enabled = !!params.freq.ht_enabled;
- wpa_s->mesh_vht_enabled = !!params.freq.vht_enabled;
- if (params.freq.ht_enabled && params.freq.sec_channel_offset)
- ssid->ht40 = params.freq.sec_channel_offset;
+ params->meshid = ssid->ssid;
+ params->meshid_len = ssid->ssid_len;
+ ibss_mesh_setup_freq(wpa_s, ssid, ¶ms->freq);
+ wpa_s->mesh_ht_enabled = !!params->freq.ht_enabled;
+ wpa_s->mesh_vht_enabled = !!params->freq.vht_enabled;
+ if (params->freq.ht_enabled && params->freq.sec_channel_offset)
+ ssid->ht40 = params->freq.sec_channel_offset;
+
if (wpa_s->mesh_vht_enabled) {
ssid->vht = 1;
- switch (params.freq.bandwidth) {
+ switch (params->freq.bandwidth) {
case 80:
- if (params.freq.center_freq2) {
+ if (params->freq.center_freq2) {
ssid->max_oper_chwidth = VHT_CHANWIDTH_80P80MHZ;
ssid->vht_center_freq2 =
- params.freq.center_freq2;
+ params->freq.center_freq2;
} else {
ssid->max_oper_chwidth = VHT_CHANWIDTH_80MHZ;
}
@@ -405,67 +441,43 @@ int wpa_supplicant_join_mesh(struct wpa_supplicant *wpa_s,
}
}
if (ssid->beacon_int > 0)
- params.beacon_int = ssid->beacon_int;
+ params->beacon_int = ssid->beacon_int;
else if (wpa_s->conf->beacon_int > 0)
- params.beacon_int = wpa_s->conf->beacon_int;
+ params->beacon_int = wpa_s->conf->beacon_int;
if (ssid->dtim_period > 0)
- params.dtim_period = ssid->dtim_period;
+ params->dtim_period = ssid->dtim_period;
else if (wpa_s->conf->dtim_period > 0)
- params.dtim_period = wpa_s->conf->dtim_period;
- params.conf.max_peer_links = wpa_s->conf->max_peer_links;
+ params->dtim_period = wpa_s->conf->dtim_period;
+ params->conf.max_peer_links = wpa_s->conf->max_peer_links;
if (ssid->mesh_rssi_threshold < DEFAULT_MESH_RSSI_THRESHOLD) {
- params.conf.rssi_threshold = ssid->mesh_rssi_threshold;
- params.conf.flags |= WPA_DRIVER_MESH_CONF_FLAG_RSSI_THRESHOLD;
+ params->conf.rssi_threshold = ssid->mesh_rssi_threshold;
+ params->conf.flags |= WPA_DRIVER_MESH_CONF_FLAG_RSSI_THRESHOLD;
}
if (ssid->key_mgmt & WPA_KEY_MGMT_SAE) {
- params.flags |= WPA_DRIVER_MESH_FLAG_SAE_AUTH;
- params.flags |= WPA_DRIVER_MESH_FLAG_AMPE;
+ params->flags |= WPA_DRIVER_MESH_FLAG_SAE_AUTH;
+ params->flags |= WPA_DRIVER_MESH_FLAG_AMPE;
wpa_s->conf->user_mpm = 1;
}
if (wpa_s->conf->user_mpm) {
- params.flags |= WPA_DRIVER_MESH_FLAG_USER_MPM;
- params.conf.auto_plinks = 0;
+ params->flags |= WPA_DRIVER_MESH_FLAG_USER_MPM;
+ params->conf.auto_plinks = 0;
} else {
- params.flags |= WPA_DRIVER_MESH_FLAG_DRIVER_MPM;
- params.conf.auto_plinks = 1;
+ params->flags |= WPA_DRIVER_MESH_FLAG_DRIVER_MPM;
+ params->conf.auto_plinks = 1;
}
- params.conf.peer_link_timeout = wpa_s->conf->mesh_max_inactivity;
+ params->conf.peer_link_timeout = wpa_s->conf->mesh_max_inactivity;
- if (wpa_supplicant_mesh_init(wpa_s, ssid, ¶ms.freq)) {
+ wpa_s->mesh_params = params;
+ if (wpa_supplicant_mesh_init(wpa_s, ssid, ¶ms->freq)) {
wpa_msg(wpa_s, MSG_ERROR, "Failed to init mesh");
wpa_drv_leave_mesh(wpa_s);
ret = -1;
goto out;
}
- if (ssid->key_mgmt & WPA_KEY_MGMT_SAE) {
- wpa_s->pairwise_cipher = wpa_s->mesh_rsn->pairwise_cipher;
- wpa_s->group_cipher = wpa_s->mesh_rsn->group_cipher;
- wpa_s->mgmt_group_cipher = wpa_s->mesh_rsn->mgmt_group_cipher;
- }
-
- if (wpa_s->ifmsh) {
- params.ies = wpa_s->ifmsh->mconf->rsn_ie;
- params.ie_len = wpa_s->ifmsh->mconf->rsn_ie_len;
- params.basic_rates = wpa_s->ifmsh->basic_rates;
- params.conf.flags |= WPA_DRIVER_MESH_CONF_FLAG_HT_OP_MODE;
- params.conf.ht_opmode = wpa_s->ifmsh->bss[0]->iface->ht_op_mode;
- }
-
- wpa_msg(wpa_s, MSG_INFO, "joining mesh %s",
- wpa_ssid_txt(ssid->ssid, ssid->ssid_len));
- ret = wpa_drv_join_mesh(wpa_s, ¶ms);
- if (ret)
- wpa_msg(wpa_s, MSG_ERROR, "mesh join error=%d", ret);
-
- /* hostapd sets the interface down until we associate */
- wpa_drv_set_operstate(wpa_s, 1);
-
- if (!ret)
- wpa_supplicant_set_state(wpa_s, WPA_COMPLETED);
-
+ wpas_join_mesh(wpa_s);
out:
return ret;
}
diff --git a/wpa_supplicant/mesh.h b/wpa_supplicant/mesh.h
index 7317083c9..2e2f3cfbf 100644
--- a/wpa_supplicant/mesh.h
+++ b/wpa_supplicant/mesh.h
@@ -21,6 +21,7 @@ int wpas_mesh_add_interface(struct wpa_supplicant *wpa_s, char *ifname,
int wpas_mesh_peer_remove(struct wpa_supplicant *wpa_s, const u8 *addr);
int wpas_mesh_peer_add(struct wpa_supplicant *wpa_s, const u8 *addr,
int duration);
+void wpas_join_mesh(struct wpa_supplicant *wpa_s);
#ifdef CONFIG_MESH
diff --git a/wpa_supplicant/wpa_supplicant_i.h b/wpa_supplicant/wpa_supplicant_i.h
index d5bfa7ddf..ab5f88f66 100644
--- a/wpa_supplicant/wpa_supplicant_i.h
+++ b/wpa_supplicant/wpa_supplicant_i.h
@@ -810,6 +810,7 @@ struct wpa_supplicant {
unsigned int mesh_if_created:1;
unsigned int mesh_ht_enabled:1;
unsigned int mesh_vht_enabled:1;
+ struct wpa_driver_mesh_join_params *mesh_params;
#ifdef CONFIG_PMKSA_CACHE_EXTERNAL
/* struct external_pmksa_cache::list */
struct dl_list mesh_external_pmksa_cache;
--
2.11.0 (Apple Git-81)
More information about the Hostap
mailing list