[PATCH v2 13/33] test: FT-PSK with VLAN
M. Braun
michael-dev at fami-braun.de
Sat Sep 24 14:07:57 PDT 2016
From: Michael Braun <michael-dev at fami-braun.de>
Signed-off-by: Michael Braun <michael-dev at fami-braun.de>
---
tests/hwsim/test_ap_ft.py | 128 ++++++++++++++++++++++++++++++++++++++++++++++
1 file changed, 128 insertions(+)
diff --git a/tests/hwsim/test_ap_ft.py b/tests/hwsim/test_ap_ft.py
index 6dfb0e0..b32ab4f 100644
--- a/tests/hwsim/test_ap_ft.py
+++ b/tests/hwsim/test_ap_ft.py
@@ -208,6 +208,64 @@ def test_ap_ft_disconnected(dev, apdev):
if "[WPA2-FT/PSK-CCMP]" not in dev[0].request("SCAN_RESULTS"):
raise Exception("Scan results missing RSN element info")
+def test_ap_ft_vlan(dev, apdev):
+ """WPA2-PSK-FT AP w VLAN"""
+ ssid = "test-ft"
+ passphrase="12345678"
+
+ params = ft_params1(ssid=ssid, passphrase=passphrase)
+ params['dynamic_vlan'] = "1";
+ params['accept_mac_file'] = "hostapd.accept";
+ hapd0 = hostapd.add_ap(apdev[0]['ifname'], params)
+
+ params = ft_params2(ssid=ssid, passphrase=passphrase)
+ params['dynamic_vlan'] = "1";
+ params['accept_mac_file'] = "hostapd.accept";
+ hapd1 = hostapd.add_ap(apdev[1]['ifname'], params)
+
+ run_roams(dev[0], apdev, hapd0, hapd1, ssid, passphrase, conndev="brvlan1")
+ if "[WPA2-FT/PSK-CCMP]" not in dev[0].request("SCAN_RESULTS"):
+ raise Exception("Scan results missing RSN element info")
+
+def test_ap_ft_vlan_disconnected(dev, apdev):
+ """WPA2-PSK-FT AP w VLAN"""
+ ssid = "test-ft"
+ passphrase="12345678"
+
+ params = ft_params1a(ssid=ssid, passphrase=passphrase)
+ params['dynamic_vlan'] = "1";
+ params['accept_mac_file'] = "hostapd.accept";
+ params['ft_psk_generate_local'] = "1";
+ hapd0 = hostapd.add_ap(apdev[0]['ifname'], params)
+
+ params = ft_params2a(ssid=ssid, passphrase=passphrase)
+ params['dynamic_vlan'] = "1";
+ params['accept_mac_file'] = "hostapd.accept";
+ params['ft_psk_generate_local'] = "1";
+ hapd1 = hostapd.add_ap(apdev[1]['ifname'], params)
+
+ run_roams(dev[0], apdev, hapd0, hapd1, ssid, passphrase, conndev="brvlan1")
+ if "[WPA2-FT/PSK-CCMP]" not in dev[0].request("SCAN_RESULTS"):
+ raise Exception("Scan results missing RSN element info")
+
+def test_ap_ft_vlan_2(dev, apdev):
+ """WPA2-PSK-FT AP w VLAN and dest-AP does not have VLAN info locally"""
+ ssid = "test-ft"
+ passphrase="12345678"
+
+ params = ft_params1(ssid=ssid, passphrase=passphrase)
+ params['dynamic_vlan'] = "1";
+ params['accept_mac_file'] = "hostapd.accept";
+ hapd0 = hostapd.add_ap(apdev[0]['ifname'], params)
+
+ params = ft_params2(ssid=ssid, passphrase=passphrase)
+ params['dynamic_vlan'] = "1";
+ hapd1 = hostapd.add_ap(apdev[1]['ifname'], params)
+
+ run_roams(dev[0], apdev, hapd0, hapd1, ssid, passphrase, conndev="brvlan1")
+ if "[WPA2-FT/PSK-CCMP]" not in dev[0].request("SCAN_RESULTS"):
+ raise Exception("Scan results missing RSN element info")
+
def test_ap_ft_many(dev, apdev):
"""WPA2-PSK-FT AP multiple times"""
ssid = "test-ft"
@@ -220,6 +278,23 @@ def test_ap_ft_many(dev, apdev):
run_roams(dev[0], apdev, hapd0, hapd1, ssid, passphrase, roams=50)
+def test_ap_ft_many_vlan(dev, apdev):
+ """WPA2-PSK-FT AP w VLAN"""
+ ssid = "test-ft"
+ passphrase="12345678"
+
+ params = ft_params1(ssid=ssid, passphrase=passphrase)
+ params['dynamic_vlan'] = "1";
+ params['accept_mac_file'] = "hostapd.accept";
+ hapd0 = hostapd.add_ap(apdev[0]['ifname'], params)
+
+ params = ft_params2(ssid=ssid, passphrase=passphrase)
+ params['dynamic_vlan'] = "1";
+ params['accept_mac_file'] = "hostapd.accept";
+ hapd1 = hostapd.add_ap(apdev[1]['ifname'], params)
+
+ run_roams(dev[0], apdev, hapd0, hapd1, ssid, passphrase, roams=50, conndev="brvlan1")
+
def test_ap_ft_mixed(dev, apdev):
"""WPA2-PSK-FT mixed-mode AP"""
ssid = "test-ft-mixed"
@@ -264,6 +339,24 @@ def test_ap_ft_over_ds(dev, apdev):
check_mib(dev[0], [ ("dot11RSNAAuthenticationSuiteRequested", "00-0f-ac-4"),
("dot11RSNAAuthenticationSuiteSelected", "00-0f-ac-4") ])
+def test_ap_ft_vlan_over_ds(dev, apdev):
+ """WPA2-PSK-FT AP over DS w VLAN"""
+ ssid = "test-ft"
+ passphrase="12345678"
+
+ params = ft_params1(ssid=ssid, passphrase=passphrase)
+ params['dynamic_vlan'] = "1";
+ params['accept_mac_file'] = "hostapd.accept";
+ hapd0 = hostapd.add_ap(apdev[0]['ifname'], params)
+ params = ft_params2(ssid=ssid, passphrase=passphrase)
+ params['dynamic_vlan'] = "1";
+ params['accept_mac_file'] = "hostapd.accept";
+ hapd1 = hostapd.add_ap(apdev[1]['ifname'], params)
+
+ run_roams(dev[0], apdev, hapd0, hapd1, ssid, passphrase, over_ds=True, conndev="brvlan1")
+ check_mib(dev[0], [ ("dot11RSNAAuthenticationSuiteRequested", "00-0f-ac-4"),
+ ("dot11RSNAAuthenticationSuiteSelected", "00-0f-ac-4") ])
+
def test_ap_ft_over_ds_many(dev, apdev):
"""WPA2-PSK-FT AP over DS multiple times"""
ssid = "test-ft"
@@ -277,6 +370,23 @@ def test_ap_ft_over_ds_many(dev, apdev):
run_roams(dev[0], apdev, hapd0, hapd1, ssid, passphrase, over_ds=True,
roams=50)
+def test_ap_ft_vlan_over_ds_many(dev, apdev):
+ """WPA2-PSK-FT AP over DS multiple times"""
+ ssid = "test-ft"
+ passphrase="12345678"
+
+ params = ft_params1(ssid=ssid, passphrase=passphrase)
+ params['dynamic_vlan'] = "1";
+ params['accept_mac_file'] = "hostapd.accept";
+ hapd0 = hostapd.add_ap(apdev[0]['ifname'], params)
+ params = ft_params2(ssid=ssid, passphrase=passphrase)
+ params['dynamic_vlan'] = "1";
+ params['accept_mac_file'] = "hostapd.accept";
+ hapd1 = hostapd.add_ap(apdev[1]['ifname'], params)
+
+ run_roams(dev[0], apdev, hapd0, hapd1, ssid, passphrase, over_ds=True,
+ roams=50, conndev="brvlan1")
+
@remote_compatible
def test_ap_ft_over_ds_unknown_target(dev, apdev):
"""WPA2-PSK-FT AP"""
@@ -419,6 +529,24 @@ def test_ap_ft_over_ds_pull(dev, apdev):
run_roams(dev[0], apdev, hapd0, hapd1, ssid, passphrase, over_ds=True)
+def test_ap_ft_over_ds_pull_vlan(dev, apdev):
+ """WPA2-PSK-FT AP over DS (pull PMK) w VLAN"""
+ ssid = "test-ft"
+ passphrase="12345678"
+
+ params = ft_params1(ssid=ssid, passphrase=passphrase)
+ params["pmk_r1_push"] = "0"
+ params['dynamic_vlan'] = "1";
+ params['accept_mac_file'] = "hostapd.accept";
+ hapd0 = hostapd.add_ap(apdev[0]['ifname'], params)
+ params = ft_params2(ssid=ssid, passphrase=passphrase)
+ params["pmk_r1_push"] = "0"
+ params['dynamic_vlan'] = "1";
+ params['accept_mac_file'] = "hostapd.accept";
+ hapd1 = hostapd.add_ap(apdev[1]['ifname'], params)
+
+ run_roams(dev[0], apdev, hapd0, hapd1, ssid, passphrase, over_ds=True, conndev="brvlan1")
+
def test_ap_ft_sae(dev, apdev):
"""WPA2-PSK-FT-SAE AP"""
if "SAE" not in dev[0].get_capability("auth_alg"):
--
2.1.4
More information about the Hostap
mailing list