[PATCH 2/6] tests: pass apdev to add_bss() remove_bss()
Janusz Dziedzic
janusz.dziedzic at tieto.com
Wed Mar 30 01:55:57 PDT 2016
Pass apdev dictionary to add_bss()/remove_bss()
funtions instead of ifname. This allow us to handle
remote hosts correctly while we can get hostname
form apdev['hostname'].
Signed-off-by: Janusz Dziedzic <janusz.dziedzic at tieto.com>
---
tests/hwsim/hostapd.py | 25 ++++--
tests/hwsim/test_ap_dynamic.py | 165 ++++++++++++++++++----------------
tests/hwsim/test_ap_ht.py | 14 +--
tests/hwsim/test_ap_wps.py | 2 +-
tests/hwsim/test_monitor_interface.py | 2 +-
5 files changed, 119 insertions(+), 89 deletions(-)
diff --git a/tests/hwsim/hostapd.py b/tests/hwsim/hostapd.py
index 5abd3ca..5ee22bb 100644
--- a/tests/hwsim/hostapd.py
+++ b/tests/hwsim/hostapd.py
@@ -383,9 +383,16 @@ def add_ap(apdev, params, wait_enabled=True, no_enable=False, timeout=30):
raise Exception("AP startup failed")
return hapd
-def add_bss(phy, ifname, confname, ignore_error=False, hostname=None,
- port=8878):
- logger.info("Starting BSS phy=" + phy + " ifname=" + ifname)
+def add_bss(phy, apdev, confname, ignore_error=False):
+ ifname = apdev['ifname']
+ try:
+ hostname = apdev['hostname']
+ port = apdev['port']
+ logger.info("Starting BSS " + hostname + "/" + port + " phy=" + phy + " ifname=" + ifname)
+ except:
+ logger.info("Starting BSS phy=" + phy + " ifname=" + ifname)
+ hostname = None
+ port = 8878
hapd_global = HostapdGlobal(hostname=hostname, port=port)
hapd_global.add_bss(phy, confname, ignore_error)
port = hapd_global.get_ctrl_iface_port(ifname)
@@ -402,8 +409,16 @@ def add_iface(ifname, confname, hostname=None, port=8878):
if not hapd.ping():
raise Exception("Could not ping hostapd")
-def remove_bss(ifname, hostname=None, port=8878):
- logger.info("Removing BSS " + ifname)
+def remove_bss(apdev):
+ ifname = apdev['ifname']
+ try:
+ hostname = apdev['hostname']
+ port = apdev['port']
+ logger.info("Removing BSS " + hostname + "/" + port + " " + ifname)
+ except:
+ logger.info("Removing BSS " + ifname)
+ hostname = None
+ port = 8878
hapd_global = HostapdGlobal(hostname=hostname, port=port)
hapd_global.remove(ifname)
diff --git a/tests/hwsim/test_ap_dynamic.py b/tests/hwsim/test_ap_dynamic.py
index de1c4d9..dac2d20 100644
--- a/tests/hwsim/test_ap_dynamic.py
+++ b/tests/hwsim/test_ap_dynamic.py
@@ -92,111 +92,117 @@ def _test_ap_bss_add_remove(dev, apdev):
for i in range(3):
dev[i].flush_scan_cache()
dev[i].request("SCAN_INTERVAL 1")
- ifname1 = apdev[0]['ifname']
- ifname2 = apdev[0]['ifname'] + '-2'
- ifname3 = apdev[0]['ifname'] + '-3'
+ apdev1 = apdev[0].copy()
+ apdev2 = apdev[0].copy()
+ apdev2['ifname'] = apdev[0]['ifname'] + '-2'
+ apdev3 = apdev[0].copy()
+ apdev3['ifname'] = apdev[0]['ifname'] + '-3'
+
logger.info("Set up three BSSes one by one")
- hostapd.add_bss('phy3', ifname1, 'bss-1.conf')
+ hostapd.add_bss('phy3', apdev1, 'bss-1.conf')
multi_check(dev, [ True, False, False ])
- hostapd.add_bss('phy3', ifname2, 'bss-2.conf')
+ hostapd.add_bss('phy3', apdev2, 'bss-2.conf')
multi_check(dev, [ True, True, False ])
- hostapd.add_bss('phy3', ifname3, 'bss-3.conf')
+ hostapd.add_bss('phy3', apdev3, 'bss-3.conf')
multi_check(dev, [ True, True, True ])
logger.info("Remove the last BSS and re-add it")
- hostapd.remove_bss(ifname3)
+ hostapd.remove_bss(apdev3)
multi_check(dev, [ True, True, False ])
- hostapd.add_bss('phy3', ifname3, 'bss-3.conf')
+ hostapd.add_bss('phy3', apdev3, 'bss-3.conf')
multi_check(dev, [ True, True, True ])
logger.info("Remove the middle BSS and re-add it")
- hostapd.remove_bss(ifname2)
+ hostapd.remove_bss(apdev2)
multi_check(dev, [ True, False, True ])
- hostapd.add_bss('phy3', ifname2, 'bss-2.conf')
+ hostapd.add_bss('phy3', apdev2, 'bss-2.conf')
multi_check(dev, [ True, True, True ])
logger.info("Remove the first BSS and re-add it and other BSSs")
- hostapd.remove_bss(ifname1)
+ hostapd.remove_bss(apdev1)
multi_check(dev, [ False, False, False ])
- hostapd.add_bss('phy3', ifname1, 'bss-1.conf')
- hostapd.add_bss('phy3', ifname2, 'bss-2.conf')
- hostapd.add_bss('phy3', ifname3, 'bss-3.conf')
+ hostapd.add_bss('phy3', apdev1, 'bss-1.conf')
+ hostapd.add_bss('phy3', apdev2, 'bss-2.conf')
+ hostapd.add_bss('phy3', apdev3, 'bss-3.conf')
multi_check(dev, [ True, True, True ])
logger.info("Remove two BSSes and re-add them")
- hostapd.remove_bss(ifname2)
+ hostapd.remove_bss(apdev2)
multi_check(dev, [ True, False, True ])
- hostapd.remove_bss(ifname3)
+ hostapd.remove_bss(apdev3)
multi_check(dev, [ True, False, False ])
- hostapd.add_bss('phy3', ifname2, 'bss-2.conf')
+ hostapd.add_bss('phy3', apdev2, 'bss-2.conf')
multi_check(dev, [ True, True, False ])
- hostapd.add_bss('phy3', ifname3, 'bss-3.conf')
+ hostapd.add_bss('phy3', apdev3, 'bss-3.conf')
multi_check(dev, [ True, True, True ])
logger.info("Remove three BSSes in and re-add them")
- hostapd.remove_bss(ifname3)
+ hostapd.remove_bss(apdev3)
multi_check(dev, [ True, True, False ])
- hostapd.remove_bss(ifname2)
+ hostapd.remove_bss(apdev2)
multi_check(dev, [ True, False, False ])
- hostapd.remove_bss(ifname1)
+ hostapd.remove_bss(apdev1)
multi_check(dev, [ False, False, False ])
- hostapd.add_bss('phy3', ifname1, 'bss-1.conf')
+ hostapd.add_bss('phy3', apdev1, 'bss-1.conf')
multi_check(dev, [ True, False, False ])
- hostapd.add_bss('phy3', ifname2, 'bss-2.conf')
+ hostapd.add_bss('phy3', apdev2, 'bss-2.conf')
multi_check(dev, [ True, True, False ])
- hostapd.add_bss('phy3', ifname3, 'bss-3.conf')
+ hostapd.add_bss('phy3', apdev3, 'bss-3.conf')
multi_check(dev, [ True, True, True ])
logger.info("Test error handling if a duplicate ifname is tried")
- hostapd.add_bss('phy3', ifname3, 'bss-3.conf', ignore_error=True)
+ hostapd.add_bss('phy3', apdev3, 'bss-3.conf', ignore_error=True)
multi_check(dev, [ True, True, True ])
def test_ap_bss_add_remove_during_ht_scan(dev, apdev):
"""Dynamic BSS add during HT40 co-ex scan"""
for i in range(3):
dev[i].flush_scan_cache()
- ifname1 = apdev[0]['ifname']
- ifname2 = apdev[0]['ifname'] + '-2'
- hostapd.add_bss('phy3', ifname1, 'bss-ht40-1.conf')
- hostapd.add_bss('phy3', ifname2, 'bss-ht40-2.conf')
+ apdev1 = apdev[0].copy()
+ apdev2 = apdev[0].copy()
+ apdev2['ifname'] = apdev[0]['ifname'] + '-2'
+ hostapd.add_bss('phy3', apdev1, 'bss-ht40-1.conf')
+ hostapd.add_bss('phy3', apdev2, 'bss-ht40-2.conf')
multi_check(dev, [ True, True ], scan_opt=False)
- hostapd.remove_bss(ifname2)
- hostapd.remove_bss(ifname1)
+ hostapd.remove_bss(apdev2)
+ hostapd.remove_bss(apdev1)
- hostapd.add_bss('phy3', ifname1, 'bss-ht40-1.conf')
- hostapd.add_bss('phy3', ifname2, 'bss-ht40-2.conf')
- hostapd.remove_bss(ifname2)
+ hostapd.add_bss('phy3', apdev1, 'bss-ht40-1.conf')
+ hostapd.add_bss('phy3', apdev2, 'bss-ht40-2.conf')
+ hostapd.remove_bss(apdev2)
multi_check(dev, [ True, False ], scan_opt=False)
- hostapd.remove_bss(ifname1)
+ hostapd.remove_bss(apdev1)
- hostapd.add_bss('phy3', ifname1, 'bss-ht40-1.conf')
- hostapd.add_bss('phy3', ifname2, 'bss-ht40-2.conf')
- hostapd.remove_bss(ifname1)
+ hostapd.add_bss('phy3', apdev1, 'bss-ht40-1.conf')
+ hostapd.add_bss('phy3', apdev2, 'bss-ht40-2.conf')
+ hostapd.remove_bss(apdev1)
multi_check(dev, [ False, False ])
def test_ap_multi_bss_config(dev, apdev):
"""hostapd start with a multi-BSS configuration file"""
for i in range(3):
dev[i].flush_scan_cache()
- ifname1 = apdev[0]['ifname']
- ifname2 = apdev[0]['ifname'] + '-2'
- ifname3 = apdev[0]['ifname'] + '-3'
+ apdev1 = apdev[0].copy()
+ apdev2 = apdev[0].copy()
+ apdev3 = apdev[0].copy()
+ apdev2['ifname'] = apdev[0]['ifname'] + '-2'
+ apdev3['ifname'] = apdev[0]['ifname'] + '-3'
logger.info("Set up three BSSes with one configuration file")
- hostapd.add_iface(ifname1, 'multi-bss.conf')
- hapd = hostapd.Hostapd(ifname1)
+ hostapd.add_iface(apdev1['ifname'], 'multi-bss.conf')
+ hapd = hostapd.Hostapd(apdev1['ifname'])
hapd.enable()
multi_check(dev, [ True, True, True ])
- hostapd.remove_bss(ifname2)
+ hostapd.remove_bss(apdev2)
multi_check(dev, [ True, False, True ])
- hostapd.remove_bss(ifname3)
+ hostapd.remove_bss(apdev3)
multi_check(dev, [ True, False, False ])
- hostapd.remove_bss(ifname1)
+ hostapd.remove_bss(apdev1)
multi_check(dev, [ False, False, False ])
- hostapd.add_iface(ifname1, 'multi-bss.conf')
- hapd = hostapd.Hostapd(ifname1)
+ hostapd.add_iface(apdev1['ifname'], 'multi-bss.conf')
+ hapd = hostapd.Hostapd(apdev1['ifname'])
hapd.enable()
- hostapd.remove_bss(ifname1)
+ hostapd.remove_bss(apdev1)
multi_check(dev, [ False, False, False ])
def invalid_ap(hapd_global, ifname):
@@ -348,8 +354,11 @@ def test_ap_enable_disable_reenable(dev, apdev):
def test_ap_double_disable(dev, apdev):
"""Double DISABLE regression test"""
- hostapd.add_bss('phy3', apdev[0]['ifname'], 'bss-1.conf')
- hostapd.add_bss('phy3', apdev[0]['ifname'] + '-2', 'bss-2.conf')
+ apdev1 = apdev[0].copy()
+ apdev2 = apdev[0].copy()
+ apdev2['ifname'] = apdev[0]['ifname'] + '-2'
+ hostapd.add_bss('phy3', apdev1, 'bss-1.conf')
+ hostapd.add_bss('phy3', apdev2, 'bss-2.conf')
hapd = hostapd.Hostapd(apdev[0]['ifname'])
hapd.disable()
if "FAIL" not in hapd.request("DISABLE"):
@@ -377,23 +386,24 @@ def test_ap_bss_add_many(dev, apdev):
pass
def _test_ap_bss_add_many(dev, apdev):
- ifname = apdev[0]['ifname']
+ apdev1 = apdev[0].copy()
phy = 'phy3'
- hostapd.add_bss(phy, ifname, 'bss-1.conf')
+ hostapd.add_bss(phy, apdev1, 'bss-1.conf')
hapd = hostapd.HostapdGlobal()
fname = '/tmp/hwsim-bss.conf'
for i in range(16):
- ifname2 = ifname + '-' + str(i)
+ apdev2 = apdev[0].copy()
+ apdev2['ifname'] = apdev[0]['ifname'] + '-' + str(i)
with open(fname, 'w') as f:
f.write("driver=nl80211\n")
f.write("hw_mode=g\n")
f.write("channel=1\n")
f.write("ieee80211n=1\n")
- f.write("interface=%s\n" % ifname2)
+ f.write("interface=%s\n" % apdev2['ifname'])
f.write("bssid=02:00:00:00:03:%02x\n" % (i + 1))
f.write("ctrl_interface=/var/run/hostapd\n")
f.write("ssid=test-%d\n" % i)
- hostapd.add_bss(phy, ifname2, fname)
+ hostapd.add_bss(phy, apdev2, fname)
os.remove(fname)
dev[0].request("SCAN_INTERVAL 1")
@@ -404,19 +414,20 @@ def _test_ap_bss_add_many(dev, apdev):
dev[0].connect("test-%d" % i, key_mgmt="NONE", scan_freq="2412")
dev[0].request("DISCONNECT")
dev[0].wait_disconnected(timeout=5)
- ifname2 = ifname + '-' + str(i)
+ ifname2 = apdev[0]['ifname'] + '-' + str(i)
hapd.remove(ifname2)
def test_ap_bss_add_reuse_existing(dev, apdev):
"""Dynamic BSS add operation reusing existing interface"""
- ifname1 = apdev[0]['ifname']
- ifname2 = apdev[0]['ifname'] + '-2'
- hostapd.add_bss('phy3', ifname1, 'bss-1.conf')
- subprocess.check_call(["iw", "dev", ifname1, "interface", "add", ifname2,
+ apdev1 = apdev[0].copy()
+ apdev2 = apdev[1].copy()
+ apdev2['ifname'] = apdev[0]['ifname'] + '-2'
+ hostapd.add_bss('phy3', apdev1, 'bss-1.conf')
+ subprocess.check_call(["iw", "dev", apdev1['ifname'], "interface", "add", apdev2['ifname'],
"type", "__ap"])
- hostapd.add_bss('phy3', ifname2, 'bss-2.conf')
- hostapd.remove_bss(ifname2)
- subprocess.check_call(["iw", "dev", ifname2, "del"])
+ hostapd.add_bss('phy3', apdev2, 'bss-2.conf')
+ hostapd.remove_bss(apdev2)
+ subprocess.check_call(["iw", "dev", apdev2['ifname'], "del"])
def hapd_bss_out_of_mem(hapd, phy, confname, count, func):
with alloc_fail(hapd, count, func):
@@ -429,8 +440,9 @@ def test_ap_bss_add_out_of_memory(dev, apdev):
"""Running out of memory while adding a BSS"""
hapd2 = hostapd.add_ap(apdev[1], { "ssid": "open" })
- ifname1 = apdev[0]['ifname']
- ifname2 = apdev[0]['ifname'] + '-2'
+ apdev1 = apdev[0].copy()
+ apdev2 = apdev[0].copy()
+ apdev2['ifname'] = apdev[0]['ifname'] + '-2'
hapd_bss_out_of_mem(hapd2, 'phy3', 'bss-1.conf', 1, 'hostapd_add_iface')
for i in range(1, 3):
@@ -439,28 +451,29 @@ def test_ap_bss_add_out_of_memory(dev, apdev):
hapd_bss_out_of_mem(hapd2, 'phy3', 'bss-1.conf',
1, 'ieee802_11_build_ap_params')
- hostapd.add_bss('phy3', ifname1, 'bss-1.conf')
+ hostapd.add_bss('phy3', apdev1, 'bss-1.conf')
hapd_bss_out_of_mem(hapd2, 'phy3', 'bss-2.conf',
1, 'hostapd_interface_init_bss')
hapd_bss_out_of_mem(hapd2, 'phy3', 'bss-2.conf',
1, 'ieee802_11_build_ap_params')
- hostapd.add_bss('phy3', ifname2, 'bss-2.conf')
- hostapd.remove_bss(ifname2)
- hostapd.remove_bss(ifname1)
+ hostapd.add_bss('phy3', apdev2, 'bss-2.conf')
+ hostapd.remove_bss(apdev2)
+ hostapd.remove_bss(apdev1)
def test_ap_multi_bss(dev, apdev):
"""Multiple BSSes with hostapd"""
- ifname1 = apdev[0]['ifname']
- ifname2 = apdev[0]['ifname'] + '-2'
- hostapd.add_bss('phy3', ifname1, 'bss-1.conf')
- hostapd.add_bss('phy3', ifname2, 'bss-2.conf')
+ apdev1 = apdev[0].copy()
+ apdev2 = apdev[0].copy()
+ apdev2['ifname'] = apdev[0]['ifname'] + '-2'
+ hostapd.add_bss('phy3', apdev1, 'bss-1.conf')
+ hostapd.add_bss('phy3', apdev2, 'bss-2.conf')
dev[0].connect("bss-1", key_mgmt="NONE", scan_freq="2412")
dev[1].connect("bss-2", key_mgmt="NONE", scan_freq="2412")
- hapd1 = hostapd.Hostapd(ifname1)
- hapd2 = hostapd.Hostapd(ifname2)
+ hapd1 = hostapd.Hostapd(apdev1['ifname'])
+ hapd2 = hostapd.Hostapd(apdev2['ifname'])
hwsim_utils.test_connectivity(dev[0], hapd1)
hwsim_utils.test_connectivity(dev[1], hapd2)
diff --git a/tests/hwsim/test_ap_ht.py b/tests/hwsim/test_ap_ht.py
index e66f7a9..63aae42 100644
--- a/tests/hwsim/test_ap_ht.py
+++ b/tests/hwsim/test_ap_ht.py
@@ -699,12 +699,14 @@ def test_olbc(dev, apdev):
def test_olbc_table_limit(dev, apdev):
"""OLBC AP table size limit"""
- ifname1 = apdev[0]['ifname']
- ifname2 = apdev[0]['ifname'] + '-2'
- ifname3 = apdev[0]['ifname'] + '-3'
- hostapd.add_bss('phy3', ifname1, 'bss-1.conf')
- hostapd.add_bss('phy3', ifname2, 'bss-2.conf')
- hostapd.add_bss('phy3', ifname3, 'bss-3.conf')
+ apdev1 = apdev[0].copy()
+ apdev2 = apdev[0].copy()
+ apdev3 = apdev[0].copy()
+ apdev2['ifname'] = apdev[0]['ifname'] + '-2'
+ apdev3['ifname'] = apdev[0]['ifname'] + '-3'
+ hostapd.add_bss('phy3', apdev1, 'bss-1.conf')
+ hostapd.add_bss('phy3', apdev2, 'bss-2.conf')
+ hostapd.add_bss('phy3', apdev3, 'bss-3.conf')
params = { "ssid": "test-olbc",
"channel": "1",
diff --git a/tests/hwsim/test_ap_wps.py b/tests/hwsim/test_ap_wps.py
index ed1de58..712c7de 100644
--- a/tests/hwsim/test_ap_wps.py
+++ b/tests/hwsim/test_ap_wps.py
@@ -2287,7 +2287,7 @@ def test_ap_wps_auto_setup_with_config_file(dev, apdev):
f.write("ssid=wps\n")
f.write("eap_server=1\n")
f.write("wps_state=1\n")
- hostapd.add_bss('phy3', ifname, conffile)
+ hostapd.add_bss('phy3', apdev[0], conffile)
hapd = hostapd.Hostapd(ifname)
hapd.request("WPS_PBC")
dev[0].scan_for_bss(apdev[0]['bssid'], freq="2412")
diff --git a/tests/hwsim/test_monitor_interface.py b/tests/hwsim/test_monitor_interface.py
index 435afa7..a07668b 100644
--- a/tests/hwsim/test_monitor_interface.py
+++ b/tests/hwsim/test_monitor_interface.py
@@ -46,7 +46,7 @@ def test_monitor_iface_multi_bss(dev, apdev):
"""AP mode mmonitor interface with hostapd multi-BSS setup"""
params = { "ssid": "monitor-iface", "driver_params": "use_monitor=1" }
hapd = hostapd.add_ap(apdev[0], params)
- hostapd.add_bss('phy3', apdev[0]['ifname'] + '-2', 'bss-2.conf')
+ hostapd.add_bss('phy3', apdev[0] + '-2', 'bss-2.conf')
dev[0].connect("monitor-iface", key_mgmt="NONE", scan_freq="2412")
dev[1].connect("bss-2", key_mgmt="NONE", scan_freq="2412")
--
1.9.1
More information about the Hostap
mailing list