[PATCH v2] mesh: Report mesh peer AID to kernel
Masashi Honma
masashi.honma at gmail.com
Thu Jun 30 18:22:39 PDT 2016
Previously, mesh power management functionality works only with kernel
MPM. Because user space MPM did not report mesh peer AID to kernel,
the kernel could not identify the bit in TIM element. So this patch
reports mesh peer AID to kernel.
Signed-off-by: Masashi Honma <masashi.honma at gmail.com>
---
src/ap/sta_info.h | 1 +
src/drivers/driver.h | 1 +
src/drivers/driver_nl80211.c | 9 +++++++++
src/drivers/nl80211_copy.h | 5 +++++
wpa_supplicant/mesh_mpm.c | 9 +++++++--
5 files changed, 23 insertions(+), 2 deletions(-)
diff --git a/src/ap/sta_info.h b/src/ap/sta_info.h
index 5d4d0c8..cf3fbb1 100644
--- a/src/ap/sta_info.h
+++ b/src/ap/sta_info.h
@@ -80,6 +80,7 @@ struct sta_info {
enum mesh_plink_state plink_state;
u16 peer_lid;
u16 my_lid;
+ u16 peer_aid;
u16 mpm_close_reason;
int mpm_retries;
u8 my_nonce[WPA_NONCE_LEN];
diff --git a/src/drivers/driver.h b/src/drivers/driver.h
index a9dbdef..7a946ec 100644
--- a/src/drivers/driver.h
+++ b/src/drivers/driver.h
@@ -1423,6 +1423,7 @@ struct hostapd_sta_add_params {
u32 flags_mask; /* unset bits in flags */
#ifdef CONFIG_MESH
enum mesh_plink_state plink_state;
+ u16 peer_aid;
#endif /* CONFIG_MESH */
int set; /* Set STA parameters instead of add */
u8 qosinfo;
diff --git a/src/drivers/driver_nl80211.c b/src/drivers/driver_nl80211.c
index c89665b..657826e 100644
--- a/src/drivers/driver_nl80211.c
+++ b/src/drivers/driver_nl80211.c
@@ -4032,6 +4032,15 @@ static int wpa_driver_nl80211_sta_add(void *priv,
if (!(params->flags & WPA_STA_ASSOCIATED))
upd.mask |= BIT(NL80211_STA_FLAG_ASSOCIATED);
}
+#ifdef CONFIG_MESH
+ } else {
+ if (params->plink_state == PLINK_ESTAB && params->peer_aid) {
+ ret = nla_put_u16(msg, NL80211_ATTR_MESH_PEER_AID,
+ params->peer_aid);
+ if (ret)
+ goto fail;
+ }
+#endif /* CONFIG_MESH */
}
wpa_printf(MSG_DEBUG, " * flags set=0x%x mask=0x%x",
diff --git a/src/drivers/nl80211_copy.h b/src/drivers/nl80211_copy.h
index 53c8278..f8c454e 100644
--- a/src/drivers/nl80211_copy.h
+++ b/src/drivers/nl80211_copy.h
@@ -1829,6 +1829,9 @@ enum nl80211_commands {
* %NL80211_ATTR_EXT_CAPA_MASK, to specify the extended capabilities per
* interface type.
*
+ * @NL80211_ATTR_MESH_PEER_AID: Association ID for the mesh peer (u16). This is
+ * used to pull the stored data for mesh peer in power save state.
+ *
* @NUM_NL80211_ATTR: total number of nl80211_attrs available
* @NL80211_ATTR_MAX: highest attribute number currently defined
* @__NL80211_ATTR_AFTER_LAST: internal use
@@ -2213,6 +2216,8 @@ enum nl80211_attrs {
NL80211_ATTR_IFTYPE_EXT_CAPA,
+ NL80211_ATTR_MESH_PEER_AID,
+
/* add attributes here, update the policy in nl80211.c */
__NL80211_ATTR_AFTER_LAST,
diff --git a/wpa_supplicant/mesh_mpm.c b/wpa_supplicant/mesh_mpm.c
index 8f327d8..444e5f9 100644
--- a/wpa_supplicant/mesh_mpm.c
+++ b/wpa_supplicant/mesh_mpm.c
@@ -195,6 +195,7 @@ static void mesh_mpm_init_link(struct wpa_supplicant *wpa_s,
sta->my_lid = llid;
sta->peer_lid = 0;
+ sta->peer_aid = 0;
/*
* We do not use wpa_mesh_set_plink_state() here because there is no
@@ -394,6 +395,7 @@ void wpa_mesh_set_plink_state(struct wpa_supplicant *wpa_s,
os_memset(¶ms, 0, sizeof(params));
params.addr = sta->addr;
params.plink_state = state;
+ params.peer_aid = sta->peer_aid;
params.set = 1;
ret = wpa_drv_sta_add(wpa_s, ¶ms);
@@ -700,6 +702,7 @@ static struct sta_info * mesh_mpm_add_peer(struct wpa_supplicant *wpa_s,
params.addr = addr;
params.plink_state = sta->plink_state;
params.aid = sta->aid;
+ params.peer_aid = sta->peer_aid;
params.listen_interval = 100;
params.ht_capabilities = sta->ht_capabilities;
params.vht_capabilities = sta->vht_capabilities;
@@ -1032,7 +1035,7 @@ void mesh_mpm_action_rx(struct wpa_supplicant *wpa_s,
struct hostapd_data *hapd = wpa_s->ifmsh->bss[0];
struct mesh_conf *mconf = wpa_s->ifmsh->mconf;
struct sta_info *sta;
- u16 plid = 0, llid = 0;
+ u16 plid = 0, llid = 0, aid = 0;
enum plink_event event;
struct ieee802_11_elems elems;
struct mesh_peer_mgmt_ie peer_mgmt_ie;
@@ -1069,7 +1072,8 @@ void mesh_mpm_action_rx(struct wpa_supplicant *wpa_s,
ie_len -= 2;
}
if (action_field == PLINK_CONFIRM) {
- wpa_printf(MSG_DEBUG, "MPM: AID 0x%x", WPA_GET_LE16(ies));
+ aid = WPA_GET_LE16(ies);
+ wpa_printf(MSG_DEBUG, "MPM: AID 0x%x", aid);
ies += 2; /* aid */
ie_len -= 2;
}
@@ -1181,6 +1185,7 @@ void mesh_mpm_action_rx(struct wpa_supplicant *wpa_s,
} else {
if (!sta->peer_lid)
sta->peer_lid = plid;
+ sta->peer_aid = aid;
event = CNF_ACPT;
}
break;
--
1.9.1
More information about the Hostap
mailing list