[PATCHv3 08/12] test: verify test_ap_vlan_iface_cleanup_multibss with per_sta_vif

[michael-dev at fami-braun.de]

From: Michael Braun <michael-dev at fami-braun.de>

This adds a new test to run test_ap_vlan_iface_cleanup_multibss
with per_sta_vif enabled.

Signed-off-by: Michael Braun <michael-dev at fami-braun.de>
---
 tests/hwsim/multi-bss-iface-per_sta_vif.conf | 42 ++++++++++++++++++++++++++++
 tests/hwsim/test_ap_vlan.py                  | 14 ++++++++--
 2 files changed, 54 insertions(+), 2 deletions(-)
 create mode 100644 tests/hwsim/multi-bss-iface-per_sta_vif.conf

diff --git a/tests/hwsim/multi-bss-iface-per_sta_vif.conf b/tests/hwsim/multi-bss-iface-per_sta_vif.conf
new file mode 100644
index 0000000..3b25883
--- /dev/null
+++ b/tests/hwsim/multi-bss-iface-per_sta_vif.conf
@@ -0,0 +1,42 @@
+driver=nl80211
+
+hw_mode=g
+channel=0
+ieee80211n=1
+
+interface=wlan3
+ctrl_interface=/var/run/hostapd
+
+ssid=bss-1
+dynamic_vlan=1
+vlan_tagged_interface=dummy0
+vlan_bridge=brvlan
+wpa=2
+wpa_key_mgmt=WPA-EAP
+rsn_pairwise=CCMP
+ieee8021x=1
+auth_server_addr=127.0.0.1
+auth_server_port=18128
+auth_server_shared_secret=radius
+nas_identifier=nas.w1.fi
+vlan_naming=1
+per_sta_vif=1
+
+bss=wlan3-2
+bssid=02:00:00:00:03:01
+ctrl_interface=/var/run/hostapd
+ssid=bss-2
+
+dynamic_vlan=1
+vlan_tagged_interface=dummy0
+vlan_bridge=brvlan
+wpa=2
+wpa_key_mgmt=WPA-EAP
+rsn_pairwise=CCMP
+ieee8021x=1
+auth_server_addr=127.0.0.1
+auth_server_port=18128
+auth_server_shared_secret=radius
+nas_identifier=nas.w1.fi
+vlan_naming=1
+per_sta_vif=1
diff --git a/tests/hwsim/test_ap_vlan.py b/tests/hwsim/test_ap_vlan.py
index af6dedd..afaa9e8 100644
--- a/tests/hwsim/test_ap_vlan.py
+++ b/tests/hwsim/test_ap_vlan.py
@@ -242,7 +242,7 @@ def ap_vlan_iface_test_and_prepare_environ():
     if "dummy0.1" in ifaces:
         raise Exception("dummy0.1 was not removed before testing")
 
-def test_ap_vlan_iface_cleanup_multibss(dev, apdev):
+def test_ap_vlan_iface_cleanup_multibss(dev, apdev, p, cfgfile='multi-bss-iface.conf'):
     """AP VLAN operation in multi-BSS multi-VLAN case"""
 
     # AP VLAN with WPA2-Enterprise and RADIUS attributes changing VLANID
@@ -271,7 +271,7 @@ def test_ap_vlan_iface_cleanup_multibss(dev, apdev):
         ifname = apdev[0]['ifname']
 
         # start the actual test
-        hostapd.add_iface(ifname, 'multi-bss-iface.conf')
+        hostapd.add_iface(ifname, cfgfile)
         hapd = hostapd.Hostapd(ifname)
         hapd1 = hostapd.Hostapd("wlan3-2", 1)
         hapd1.enable()
@@ -385,6 +385,16 @@ def test_ap_vlan_iface_cleanup_multibss(dev, apdev):
     finally:
         ap_vlan_iface_cleanup_multibss_cleanup()
 
+def test_ap_vlan_iface_cleanup_multibss_per_sta_vif(dev, apdev, p):
+    """AP VLAN operation in multi-BSS multi-VLAN case with per-sta-vif set"""
+
+    # AP VLAN with WPA2-Enterprise and RADIUS attributes changing VLANID
+    # check that multiple bss do not interfere with each other with respect
+    # to deletion of bridge and tagged interface
+    # per_sta_vif is enabled
+
+    test_ap_vlan_iface_cleanup_multibss(dev, apdev, p, cfgfile='multi-bss-iface-per_sta_vif.conf')
+
 def test_ap_vlan_without_station(dev, apdev, p):
     """AP VLAN with WPA2-PSK and no station"""
     try:
-- 
2.1.4