WPS PBC failure, followed by connect

[Morten Bruun]

Hi all,

I have a setup where I'm running wpa_supplicant as an external registrar.

When I perform a PBC using the wpa_gui I can connect to the network,
but in the event history (see below) it looks like I get a failure
first and the the connection is established. Is this normal behaviour?

Kind regards
Morten

<3>CTRL-EVENT-SCAN-STARTED
<3>CTRL-EVENT-SCAN-RESULTS
<3>WPS-AP-AVAILABLE
<3>CTRL-EVENT-SCAN-STARTED
<3>CTRL-EVENT-SCAN-RESULTS
<3>WPS-AP-AVAILABLE
<3>CTRL-EVENT-SCAN-STARTED
<3>CTRL-EVENT-SCAN-RESULTS
<3>WPS-AP-AVAILABLE-PBC
<3>SME: Trying to authenticate with c8:a7:0a:d2:30:4e
(SSID='mbruun-5G' freq=5745 MHz)
<3>Trying to associate with c8:a7:0a:d2:30:4e (SSID='mbruun-5G' freq=5745 MHz)
<3>Associated with c8:a7:0a:d2:30:4e
<3>CTRL-EVENT-EAP-STARTED EAP authentication started
<3>CTRL-EVENT-EAP-STATUS status='started' parameter=''
<3>CTRL-EVENT-EAP-PROPOSED-METHOD vendor=14122 method=1
<3>CTRL-EVENT-EAP-STATUS status='accept proposed method' parameter='WSC'
<3>CTRL-EVENT-EAP-METHOD EAP vendor 14122 method 1 (WSC) selected
<3>WPS-M2D dev_password_id=0 config_error=0
<3>WPS-CRED-RECEIVED
<3>WPS-SUCCESS
<3>CTRL-EVENT-EAP-STATUS status='completion' parameter='failure'
<3>CTRL-EVENT-EAP-FAILURE EAP authentication failed
<3>CTRL-EVENT-DISCONNECTED bssid=c8:a7:0a:d2:30:4e reason=3 locally_generated=1
<3>CTRL-EVENT-SCAN-STARTED
<3>CTRL-EVENT-SCAN-RESULTS
<3>WPS-AP-AVAILABLE-PBC
<3>SME: Trying to authenticate with c8:a7:0a:d2:30:4e
(SSID='mbruun-5G' freq=5745 MHz)
<3>Trying to associate with c8:a7:0a:d2:30:4e (SSID='mbruun-5G' freq=5745 MHz)
<3>Associated with c8:a7:0a:d2:30:4e
<3>WPA: Key negotiation completed with c8:a7:0a:d2:30:4e [PTK=CCMP GTK=CCMP]
<3>CTRL-EVENT-CONNECTED - Connection to c8:a7:0a:d2:30:4e completed
[id=0 id_str=]
>