[PATCH v4 25/29] tests: hostapd.py add params for required configurations

Janusz Dziedzic janusz.dziedzic at tieto.com
Fri Feb 26 01:38:40 PST 2016


Add support for b_olny/g_only/a_only/HT20/HT40/VHT80

Signed-off-by: Janusz Dziedzic <janusz.dziedzic at tieto.com>
---
 tests/hwsim/hostapd.py | 49 +++++++++++++++++++++++++++++++++++++++++++++++++
 1 file changed, 49 insertions(+)

diff --git a/tests/hwsim/hostapd.py b/tests/hwsim/hostapd.py
index 3efebb9..a336a59 100644
--- a/tests/hwsim/hostapd.py
+++ b/tests/hwsim/hostapd.py
@@ -443,3 +443,52 @@ def wpa2_eap_params(ssid=None):
     if ssid:
         params["ssid"] = ssid
     return params
+
+def b_only_params(channel="1", ssid=None, country=None):
+    params = { "hw_mode" : "b",
+               "channel" : channel }
+    if ssid:
+        params["ssid"] = ssid
+    if country:
+        params["country_code"] = country
+    return params
+
+def g_only_params(channel="1", ssid=None, country=None):
+    params = { "hw_mode" : "g",
+               "channel" : channel }
+    if ssid:
+        params["ssid"] = ssid
+    if country:
+        params["country_code"] = country
+    return params
+
+def a_only_params(channel="36", ssid=None, country=None):
+    params = { "hw_mode" : "a",
+               "channel" : channel }
+    if ssid:
+        params["ssid"] = ssid
+    if country:
+        params["country_code"] = country
+    return params
+
+def ht20_params(channel="1", ssid=None, country=None):
+    params = { "ieee80211n" : "1",
+               "channel" : channel,
+               "hw_mode" : "g" }
+    if int(channel) > 14:
+        params["hw_mode"] = "a"
+    if ssid:
+        params["ssid"] = ssid
+    if country:
+        params["country_code"] = country
+    return params
+
+def ht40_plus_params(channel="1", ssid=None, country=None):
+    params = ht20_params(channel, ssid, country)
+    params['ht_capab'] = "[HT40+]"
+    return params
+
+def ht40_minus_params(channel="1", ssid=None, country=None):
+    params = ht20_params(channel, ssid, country)
+    params['ht_capab'] = "[HT40-]"
+    return params
-- 
1.9.1




More information about the Hostap mailing list