[PATCH v3 26A/26] tests: remote add utils
Janusz Dziedzic
janusz.dziedzic at tieto.com
Wed Feb 17 04:23:57 PST 2016
Add remote tests utils.
Signed-off-by: Janusz Dziedzic <janusz.dziedzic at tieto.com>
---
tests/remote/utils.py | 314 ++++++++++++++++++++++++++++++++++++++++++++++++++
1 file changed, 314 insertions(+)
create mode 100644 tests/remote/utils.py
diff --git a/tests/remote/utils.py b/tests/remote/utils.py
new file mode 100644
index 0000000..ffdffcc
--- /dev/null
+++ b/tests/remote/utils.py
@@ -0,0 +1,314 @@
+import time
+import wpaspy
+
+def get_device(devices, name=None, flags=None):
+ if name is None and flags is None:
+ return devices[0]
+ for device in devices:
+ if device['name'] == name:
+ return device
+ for device in devices:
+ try:
+ device_flags = device['flags']
+ if device_flags.find(flags) != -1:
+ return device
+ except:
+ pass
+ return None
+
+def get_dut(duts, name=None):
+ if name is None:
+ return duts[0]
+ for dut in duts:
+ if dut['name'] == name:
+ return dut
+ return None
+
+def run_hostapd(dev, setup_params):
+ log_file = None
+ host = wpaspy.Host(host = dev['hostname'],
+ ifname = dev['ifname'],
+ port = dev['port'],
+ name = dev['name'])
+ try:
+ setup_hw = setup_params['setup_hw']
+ host.execute(setup_hw + " -I " + dev['ifname'])
+ except:
+ pass
+
+ try:
+ tc_name = setup_params['tc_name']
+ log_dir = setup_params['log_dir']
+ log_file = log_dir + tc_name + "_hostapd_" + host.name + "_" + host.ifname + ".log"
+ host.execute("rm " + log_file)
+ log = " -f " + log_file
+ except:
+ log = ""
+
+ status, buf = host.execute(setup_params['hostapd'] + " -B -ddt -g udp:" + host.port + log)
+ if status != 0:
+ raise Exception("Could not run hostapd: " + buf)
+
+ return host, log_file
+
+def run_wpasupplicant(dev, setup_params):
+ log_file = None
+ host = wpaspy.Host(host = dev['hostname'],
+ ifname = dev['ifname'],
+ port = dev['port'],
+ name = dev['name'])
+ try:
+ setup_hw = setup_params['setup_hw']
+ host.execute(setup_hw + " -I " + dev['ifname'])
+ except:
+ pass
+
+ try:
+ tc_name = setup_params['tc_name']
+ log_dir = setup_params['log_dir']
+ log_file = log_dir + tc_name + "_wpa_supplicant_" + host.name + "_" + host.ifname + ".log"
+ host.execute("rm " + log_file)
+ log = " -f " + log_file
+ except:
+ log = ""
+
+ status, buf = host.execute(setup_params['wpa_supplicant'] + " -B -g udp:" + host.port + log)
+ if status != 0:
+ raise Exception("Could not run wpa_supplicant: " + buf)
+
+ return host, log_file
+
+def get_ping_packet_loss(ping_res):
+ loss_line = ""
+ lines = ping_res.splitlines()
+ for line in lines:
+ if line.find("packet loss") != -1:
+ loss_line = line
+ break;
+
+ if loss_line == "":
+ return "100%"
+
+ sections = loss_line.split(",")
+
+ for section in sections:
+ if section.find("packet loss") != -1:
+ words = section.split()
+ return words[0]
+
+ return "100%"
+
+
+def get_ipv4(client, ifname=None):
+ if ifname is None:
+ ifname = client.ifname
+ status, buf = client.execute("ifconfig " + ifname)
+ lines = buf.splitlines()
+
+ for line in lines:
+ res = line.find("inet addr:")
+ if res != -1:
+ break
+
+ if res != -1:
+ words = line.split()
+ addr = words[1].split(":")
+ return addr[1]
+
+ return "unknown"
+
+def get_ipv6(client, ifname=None):
+ res = -1
+ if ifname is None:
+ ifname = client.ifname
+ status, buf = client.execute("ifconfig " + ifname)
+ lines = buf.splitlines()
+
+ for line in lines:
+ res = line.find("Scope:Link")
+ if res != -1:
+ break
+
+ if res != -1:
+ words = line.split()
+ if words[0] == "inet6" and words[1] == "addr:":
+ addr_mask = words[2]
+ addr = addr_mask.split("/")
+ return addr[0]
+
+ return "unknown"
+
+def get_ip(client, addr_type="ipv6", iface=None):
+ if addr_type == "ipv6":
+ return get_ipv6(client, iface)
+ elif addr_type == "ipv4":
+ return get_ipv4(client, iface)
+ else:
+ return "unknown addr_type: " + addr_type
+
+def ping_run(host, ip, result, ifname=None, addr_type="ipv4", deadline="5"):
+ ping = "ping"
+ if ifname is None:
+ ifname = host.ifname
+ if addr_type is "ipv6":
+ ping = "ping6"
+ ping = ping + " -w 5" + " -I " + ifname + " " + ip
+
+ thread = host.execute_run(ping, result)
+ return thread
+
+def ping_wait(host, thread, timeout=None):
+ host.wait_execute_complete(thread, timeout)
+ if thread.isAlive():
+ raise Exception("ping thread still alive")
+
+def check_connectivity(a, b, addr_type = "ipv4", deadline="5"):
+ addr_a = get_ip(a, addr_type)
+ addr_b = get_ip(b, addr_type)
+
+ if addr_type == "ipv4":
+ ping = "ping"
+ else:
+ ping = "ping6"
+
+ status, buf = a.execute(ping + " -w " + deadline + " -I " + a.ifname + " " + addr_b)
+ if status != 0:
+ raise Exception("ping " + a.ifname + " >> " + b.ifname)
+
+ a_b = get_ping_packet_loss(buf)
+
+ status, buf = b.execute(ping + " -w " + deadline + " -I " + b.ifname + " " + addr_a)
+ if status != 0:
+ raise Exception("ping " + b.ifname + " >> " + a.ifname)
+
+ b_a = get_ping_packet_loss(buf)
+
+ if int(a_b[:-1]) > 40:
+ raise Exception("Too high packet lost: " + a_b)
+
+ if int(b_a[:-1]) > 40:
+ raise Exception("Too high packet lost: " + b_a)
+
+ return a_b, b_a
+
+def get_iperf_speed(iperf_res, pattern="Mbits/sec"):
+ lines = iperf_res.splitlines()
+ sum_line = ""
+ last_line = ""
+ count = 0
+ res = -1
+
+ # first find last SUM line
+ for line in lines:
+ res = line.find("[SUM]")
+ if res != -1:
+ sum_line = line
+
+ # next check SUM status
+ if sum_line != "":
+ words = sum_line.split()
+ for word in words:
+ res = word.find(pattern)
+ if res != -1:
+ return words[count - 1] + " " + pattern
+ count = count + 1
+
+ # no SUM - one thread - find last line
+ for line in lines:
+ res = line.find(pattern)
+ if res != -1:
+ last_line = line
+
+ if last_line == "":
+ return "0 " + pattern
+
+ count = 0
+ words = last_line.split()
+ for word in words:
+ res = word.find(pattern)
+ if res != -1:
+ return words[count - 1] + " " + pattern
+ break;
+ count = count + 1
+ return "0 " + pattern
+
+def ac_to_iperf_ac(qos):
+ if qos == "be":
+ qos_param = "-S 0x00"
+ elif qos == "bk":
+ qos_param = "-S 0x20"
+ elif qos == "vi":
+ qos_param = "-S 0xA0"
+ elif qos == "vo":
+ qos_param = "-S 0xE0"
+ else:
+ qos_param = "-S 0x00"
+ return qos_param
+
+def iperf_run(server, client, server_ip, client_res, server_res,
+ l4="udp", bw="30M", test_time="30", parallel="5",
+ qos="be", param=" -i 5 ", ifname=None, l3="ipv4",
+ port="5001", iperf="iperf"):
+ if ifname == None:
+ ifname = client.ifname
+
+ if iperf == "iperf":
+ iperf_server = iperf
+ elif iperf == "iperf3":
+ iperf_server = iperf + " -1"
+
+ if l3 == "ipv4":
+ iperf_client = iperf + " -c " + server_ip + " -p " + port
+ iperf_server = iperf_server + " -p " + port
+ elif l3 == "ipv6":
+ iperf_client = iperf + " -V -c " + server_ip + "%" + ifname + " -p " + port
+ iperf_server = iperf_server + " -V -p " + port
+ else:
+ return -1, -1
+
+ iperf_server = iperf_server + " -s -f m " + param
+ iperf_client = iperf_client + " -f m -t " + test_time
+
+ if parallel != "1":
+ iperf_client = iperf_client + " -P" + parallel
+
+ if l4 == "udp":
+ if iperf is not "iperf3":
+ iperf_server = iperf_server + " -u"
+ iperf_client = iperf_client + " -u -b " + bw
+
+ qos_param = ac_to_iperf_ac(qos)
+ iperf_client = iperf_client + " " + qos_param
+
+ server_thread = server.execute_run(iperf_server, server_res)
+ time.sleep(1)
+ client_thread = client.execute_run(iperf_client, client_res)
+
+ return server_thread, client_thread
+
+def iperf_wait(server, client, server_thread, client_thread, timeout=None, iperf="iperf"):
+ client.wait_execute_complete(client_thread, timeout)
+ if client_thread.isAlive():
+ raise Exception("iperf client thread still alive")
+
+ server.wait_execute_complete(server_thread, 5)
+ if server_thread.isAlive():
+ server.execute("killall -s INT " + iperf)
+ time.sleep(1)
+
+ server.wait_execute_complete(server_thread, 5)
+ if server_thread.isAlive():
+ raise Execption("iperf server thread still alive")
+
+ return
+
+def get_ipv4_addr(setup_params, number):
+ try:
+ ipv4_base = setup_params['ipv4_test_net']
+ except:
+ ipv4_base = "172.16.12.0"
+
+ parts = ipv4_base.split('.')
+ ipv4 = parts[0] + "." + parts[1] + "." + parts[2] + "." + str(number)
+
+ return ipv4
--
1.9.1
More information about the Hostap
mailing list