[PATCH 11/26] MBO: Add global operating class definitions
Ilan Peer
ilan.peer at intel.com
Mon Feb 15 06:53:33 PST 2016
From: Avraham Stern <avraham.stern at intel.com>
Add definitions for global operating classes. These definitions
will be used to construct supported operating classes
information element.
The operating classes definitions used locally for P2P module will be
removed and included in the general operating classes definitions.
Signed-off-by: Avraham Stern <avraham.stern at intel.com>
---
src/common/ieee802_11_common.c | 40 +++++++++++++++++++++++++++++++++
src/common/ieee802_11_common.h | 15 +++++++++++++
wpa_supplicant/p2p_supplicant.c | 49 +++++++----------------------------------
3 files changed, 63 insertions(+), 41 deletions(-)
diff --git a/src/common/ieee802_11_common.c b/src/common/ieee802_11_common.c
index 44ff5cb..b9abdd3 100644
--- a/src/common/ieee802_11_common.c
+++ b/src/common/ieee802_11_common.c
@@ -1174,6 +1174,46 @@ struct wpabuf * mb_ies_by_info(struct mb_ies_info *info)
}
+const struct oper_class_map op_class[] = {
+ { HOSTAPD_MODE_IEEE80211G, 81, 1, 13, 1, BW20, P2P_SUPPORTED },
+ { HOSTAPD_MODE_IEEE80211G, 82, 14, 14, 1, BW20, P2P_NOTSUPPORTED },
+
+ /* Do not enable HT40 on 2 GHz for P2P usage for now */
+ { HOSTAPD_MODE_IEEE80211G, 83, 1, 9, 1, BW40PLUS, P2P_NOTSUPPORTED },
+ { HOSTAPD_MODE_IEEE80211G, 84, 5, 13, 1, BW40MINUS, P2P_NOTSUPPORTED },
+
+ { HOSTAPD_MODE_IEEE80211A, 115, 36, 48, 4, BW20, P2P_SUPPORTED },
+ { HOSTAPD_MODE_IEEE80211A, 116, 36, 44, 8, BW40PLUS, P2P_SUPPORTED },
+ { HOSTAPD_MODE_IEEE80211A, 117, 40, 48, 8, BW40MINUS, P2P_SUPPORTED },
+ { HOSTAPD_MODE_IEEE80211A, 118, 52, 64, 4, BW20, P2P_NOTSUPPORTED },
+ { HOSTAPD_MODE_IEEE80211A, 119, 52, 60, 8, BW40PLUS, P2P_NOTSUPPORTED },
+ { HOSTAPD_MODE_IEEE80211A, 120, 56, 64, 8, BW40MINUS, P2P_NOTSUPPORTED },
+ { HOSTAPD_MODE_IEEE80211A, 121, 100, 140, 4, BW20, P2P_NOTSUPPORTED },
+ { HOSTAPD_MODE_IEEE80211A, 122, 100, 132, 8, BW40PLUS, P2P_NOTSUPPORTED },
+ { HOSTAPD_MODE_IEEE80211A, 123, 104, 136, 8, BW40MINUS, P2P_NOTSUPPORTED },
+ { HOSTAPD_MODE_IEEE80211A, 124, 149, 161, 4, BW20, P2P_SUPPORTED },
+ { HOSTAPD_MODE_IEEE80211A, 125, 149, 169, 4, BW20, P2P_SUPPORTED },
+ { HOSTAPD_MODE_IEEE80211A, 126, 149, 157, 8, BW40PLUS, P2P_SUPPORTED },
+ { HOSTAPD_MODE_IEEE80211A, 127, 153, 161, 8, BW40MINUS, P2P_SUPPORTED },
+
+ /*
+ * IEEE P802.11ac/D7.0 Table E-4 actually talks about channel center
+ * frequency index 42, 58, 106, 122, 138, 155 with channel spacing of
+ * 80 MHz, but currently use the following definition for simplicity
+ * (these center frequencies are not actual channels, which makes
+ * wpas_p2p_allow_channel() fail). wpas_p2p_verify_80mhz() should take
+ * care of removing invalid channels.
+ */
+ { HOSTAPD_MODE_IEEE80211A, 128, 36, 161, 4, BW80, P2P_SUPPORTED },
+ { HOSTAPD_MODE_IEEE80211A, 130, 36, 161, 4, BW80P80, P2P_SUPPORTED },
+ { HOSTAPD_MODE_IEEE80211A, 129, 50, 114, 16, BW160, P2P_SUPPORTED },
+ { HOSTAPD_MODE_IEEE80211AD, 180, 1, 4, 1, BW2160, P2P_SUPPORTED },
+ { -1, 0, 0, 0, 0, BW20, P2P_NOTSUPPORTED }
+};
+
+size_t op_class_size = ARRAY_SIZE(op_class);
+
+
/**
* get_ie - Fetch a specified information element from IEs buffer
* @ies: Information elements buffer
diff --git a/src/common/ieee802_11_common.h b/src/common/ieee802_11_common.h
index 1ee70d3..6150469 100644
--- a/src/common/ieee802_11_common.h
+++ b/src/common/ieee802_11_common.h
@@ -9,6 +9,8 @@
#ifndef IEEE802_11_COMMON_H
#define IEEE802_11_COMMON_H
+#include "defs.h"
+
#define MAX_NOF_MB_IES_SUPPORTED 5
struct mb_ies_info {
@@ -126,6 +128,19 @@ struct wpabuf * mb_ies_by_info(struct mb_ies_info *info);
const char * fc2str(u16 fc);
+struct oper_class_map {
+ enum hostapd_hw_mode mode;
+ u8 op_class;
+ u8 min_chan;
+ u8 max_chan;
+ u8 inc;
+ enum { BW20, BW40PLUS, BW40MINUS, BW80, BW2160, BW160, BW80P80 } bw;
+ enum { P2P_SUPPORTED, P2P_NOTSUPPORTED } p2p;
+};
+
+extern const struct oper_class_map op_class[];
+extern size_t op_class_size;
+
const u8 *get_ie(const u8 *ies, size_t len, u8 eid);
size_t mbo_add_ie(u8 *buf, size_t len, const u8 *attr, size_t attr_len);
diff --git a/wpa_supplicant/p2p_supplicant.c b/wpa_supplicant/p2p_supplicant.c
index f4fbeaf..fd88b75 100644
--- a/wpa_supplicant/p2p_supplicant.c
+++ b/wpa_supplicant/p2p_supplicant.c
@@ -3312,45 +3312,6 @@ static int has_channel(struct wpa_global *global,
}
-struct p2p_oper_class_map {
- enum hostapd_hw_mode mode;
- u8 op_class;
- u8 min_chan;
- u8 max_chan;
- u8 inc;
- enum { BW20, BW40PLUS, BW40MINUS, BW80, BW2160, BW160, BW80P80 } bw;
-};
-
-static const struct p2p_oper_class_map op_class[] = {
- { HOSTAPD_MODE_IEEE80211G, 81, 1, 13, 1, BW20 },
-#if 0 /* Do not enable HT40 on 2 GHz for now */
- { HOSTAPD_MODE_IEEE80211G, 83, 1, 9, 1, BW40PLUS },
- { HOSTAPD_MODE_IEEE80211G, 84, 5, 13, 1, BW40MINUS },
-#endif
- { HOSTAPD_MODE_IEEE80211A, 115, 36, 48, 4, BW20 },
- { HOSTAPD_MODE_IEEE80211A, 124, 149, 161, 4, BW20 },
- { HOSTAPD_MODE_IEEE80211A, 125, 149, 169, 4, BW20 },
- { HOSTAPD_MODE_IEEE80211A, 116, 36, 44, 8, BW40PLUS },
- { HOSTAPD_MODE_IEEE80211A, 117, 40, 48, 8, BW40MINUS },
- { HOSTAPD_MODE_IEEE80211A, 126, 149, 157, 8, BW40PLUS },
- { HOSTAPD_MODE_IEEE80211A, 127, 153, 161, 8, BW40MINUS },
-
- /*
- * IEEE P802.11ac/D7.0 Table E-4 actually talks about channel center
- * frequency index 42, 58, 106, 122, 138, 155 with channel spacing of
- * 80 MHz, but currently use the following definition for simplicity
- * (these center frequencies are not actual channels, which makes
- * has_channel() fail). wpas_p2p_verify_80mhz() should take care of
- * removing invalid channels.
- */
- { HOSTAPD_MODE_IEEE80211A, 128, 36, 161, 4, BW80 },
- { HOSTAPD_MODE_IEEE80211A, 130, 36, 161, 4, BW80P80 },
- { HOSTAPD_MODE_IEEE80211A, 129, 50, 114, 16, BW160 },
- { HOSTAPD_MODE_IEEE80211AD, 180, 1, 4, 1, BW2160 },
- { -1, 0, 0, 0, 0, BW20 }
-};
-
-
static int wpas_p2p_get_center_80mhz(struct wpa_supplicant *wpa_s,
struct hostapd_hw_modes *mode,
u8 channel)
@@ -3528,10 +3489,13 @@ static int wpas_p2p_setup_channels(struct wpa_supplicant *wpa_s,
cla = cli_cla = 0;
for (op = 0; op_class[op].op_class; op++) {
- const struct p2p_oper_class_map *o = &op_class[op];
+ const struct oper_class_map *o = &op_class[op];
u8 ch;
struct p2p_reg_class *reg = NULL, *cli_reg = NULL;
+ if (o->p2p == P2P_NOTSUPPORTED)
+ continue;
+
mode = get_mode(wpa_s->hw.modes, wpa_s->hw.num_modes, o->mode);
if (mode == NULL)
continue;
@@ -3587,9 +3551,12 @@ int wpas_p2p_get_ht40_mode(struct wpa_supplicant *wpa_s,
enum chan_allowed ret;
for (op = 0; op_class[op].op_class; op++) {
- const struct p2p_oper_class_map *o = &op_class[op];
+ const struct oper_class_map *o = &op_class[op];
u8 ch;
+ if (o->p2p == P2P_NOTSUPPORTED)
+ continue;
+
for (ch = o->min_chan; ch <= o->max_chan; ch += o->inc) {
if (o->mode != HOSTAPD_MODE_IEEE80211A ||
(o->bw != BW40PLUS && o->bw != BW40MINUS) ||
--
1.9.1
More information about the Hostap
mailing list