[PATCH 1/5] hostapd_cli: Add missing command help descriptions

Mikael Kanstrup mikael.kanstrup at sonymobile.com
Wed Dec 21 02:27:16 PST 2016


Some commands are missing help description making them not show up in
the list of supported commands. Add command help description for all
missing commands.

Signed-off-by: Mikael Kanstrup <mikael.kanstrup at sonymobile.com>
---
 hostapd/hostapd_cli.c | 87 +++++++++++++++++++++++++++++++++++----------------
 1 file changed, 60 insertions(+), 27 deletions(-)

diff --git a/hostapd/hostapd_cli.c b/hostapd/hostapd_cli.c
index 8b8d7f9..8bee4db 100644
--- a/hostapd/hostapd_cli.c
+++ b/hostapd/hostapd_cli.c
@@ -1343,8 +1343,10 @@ static const struct hostapd_cli_cmd hostapd_cli_commands[] = {
 	  "= pings hostapd" },
 	{ "mib", hostapd_cli_cmd_mib, NULL,
 	  "= get MIB variables (dot1x, dot11, radius)" },
-	{ "relog", hostapd_cli_cmd_relog, NULL, NULL },
-	{ "status", hostapd_cli_cmd_status, NULL, NULL },
+	{ "relog", hostapd_cli_cmd_relog, NULL,
+	  "= reload/truncate debug log output file" },
+	{ "status", hostapd_cli_cmd_status, NULL,
+	  "= show interface status info" },
 	{ "sta", hostapd_cli_cmd_sta, hostapd_complete_sta,
 	  "<addr> = get MIB variables for one station" },
 	{ "all_sta", hostapd_cli_cmd_all_sta, NULL,
@@ -1393,9 +1395,12 @@ static const struct hostapd_cli_cmd hostapd_cli_commands[] = {
 	{ "wps_get_status", hostapd_cli_cmd_wps_get_status, NULL,
 	  "= show current WPS status" },
 #endif /* CONFIG_WPS */
-	{ "disassoc_imminent", hostapd_cli_cmd_disassoc_imminent, NULL, NULL },
-	{ "ess_disassoc", hostapd_cli_cmd_ess_disassoc, NULL, NULL },
-	{ "bss_tm_req", hostapd_cli_cmd_bss_tm_req, NULL, NULL },
+	{ "disassoc_imminent", hostapd_cli_cmd_disassoc_imminent, NULL,
+	  "= send Disassociation Imminent notification" },
+	{ "ess_disassoc", hostapd_cli_cmd_ess_disassoc, NULL,
+	  "= send ESS Dissassociation Imminent notification" },
+	{ "bss_tm_req", hostapd_cli_cmd_bss_tm_req, NULL,
+	  "= send BSS Transition Management Request" },
 	{ "get_config", hostapd_cli_cmd_get_config, NULL,
 	  "= show current configuration" },
 	{ "help", hostapd_cli_cmd_help, hostapd_cli_complete_help,
@@ -1403,35 +1408,63 @@ static const struct hostapd_cli_cmd hostapd_cli_commands[] = {
 	{ "interface", hostapd_cli_cmd_interface, hostapd_complete_interface,
 	  "[ifname] = show interfaces/select interface" },
 #ifdef CONFIG_FST
-	{ "fst", hostapd_cli_cmd_fst, NULL, NULL },
+	{ "fst", hostapd_cli_cmd_fst, NULL,
+	  "<params...> = send FST-MANAGER control interface command" },
 #endif /* CONFIG_FST */
-	{ "raw", hostapd_cli_cmd_raw, NULL, NULL },
+	{ "raw", hostapd_cli_cmd_raw, NULL,
+	  "<params..> = Send unprocessed command" },
 	{ "level", hostapd_cli_cmd_level, NULL,
 	  "<debug level> = change debug level" },
 	{ "license", hostapd_cli_cmd_license, NULL,
 	  "= show full hostapd_cli license" },
 	{ "quit", hostapd_cli_cmd_quit, NULL,
 	  "= exit hostapd_cli" },
-	{ "set", hostapd_cli_cmd_set, NULL, NULL },
-	{ "get", hostapd_cli_cmd_get, NULL, NULL },
-	{ "set_qos_map_set", hostapd_cli_cmd_set_qos_map_set, NULL, NULL },
-	{ "send_qos_map_conf", hostapd_cli_cmd_send_qos_map_conf, NULL, NULL },
-	{ "chan_switch", hostapd_cli_cmd_chan_switch, NULL, NULL },
-	{ "hs20_wnm_notif", hostapd_cli_cmd_hs20_wnm_notif, NULL, NULL },
-	{ "hs20_deauth_req", hostapd_cli_cmd_hs20_deauth_req, NULL, NULL },
-	{ "vendor", hostapd_cli_cmd_vendor, NULL, NULL },
-	{ "enable", hostapd_cli_cmd_enable, NULL, NULL },
-	{ "reload", hostapd_cli_cmd_reload, NULL, NULL },
-	{ "disable", hostapd_cli_cmd_disable, NULL, NULL },
-	{ "erp_flush", hostapd_cli_cmd_erp_flush, NULL, NULL },
-	{ "log_level", hostapd_cli_cmd_log_level, NULL, NULL },
-	{ "pmksa", hostapd_cli_cmd_pmksa, NULL, NULL },
-	{ "pmksa_flush", hostapd_cli_cmd_pmksa_flush, NULL, NULL },
-	{ "set_neighbor", hostapd_cli_cmd_set_neighbor, NULL, NULL },
-	{ "remove_neighbor", hostapd_cli_cmd_remove_neighbor, NULL, NULL },
-	{ "req_lci", hostapd_cli_cmd_req_lci, NULL, NULL },
-	{ "req_range", hostapd_cli_cmd_req_range, NULL, NULL },
-	{ "driver_flags", hostapd_cli_cmd_driver_flags, NULL, NULL },
+	{ "set", hostapd_cli_cmd_set, NULL,
+	  "<name> <value> = set runtime variables" },
+	{ "get", hostapd_cli_cmd_get, NULL,
+	  "<name> = get runtime info" },
+	{ "set_qos_map_set", hostapd_cli_cmd_set_qos_map_set, NULL,
+	  "<arg,arg,...> = set QoS Map set element" },
+	{ "send_qos_map_conf", hostapd_cli_cmd_send_qos_map_conf, NULL,
+	  "<addr> = send QoS Map Configure frame" },
+	{ "chan_switch", hostapd_cli_cmd_chan_switch, NULL,
+	  "<cs_count> <freq> [sec_channel_offset=] [center_freq1=]\n"
+	  "  [center_freq2=] [bandwidth=] [blocktx] [ht|vht]\n"
+	  "  = initiate channel switch announcement" },
+	{ "hs20_wnm_notif", hostapd_cli_cmd_hs20_wnm_notif, NULL,
+	  "<addr> <url>\n"
+	  "  = send WNM-Notification Subscription Remediation Request" },
+	{ "hs20_deauth_req", hostapd_cli_cmd_hs20_deauth_req, NULL,
+	  "<addr> <code (0/1)> <Re-auth-Delay(sec)> [url]\n"
+	  "  = Send WNM-Notification imminent deauthentication ind" },
+	{ "vendor", hostapd_cli_cmd_vendor, NULL,
+	  "<vendor id> <sub command id> [<hex formatted data>]\n"
+	  "  = send vendor driver command" },
+	{ "enable", hostapd_cli_cmd_enable, NULL,
+	  "= enable hostapd on current interface" },
+	{ "reload", hostapd_cli_cmd_reload, NULL,
+	  "= reload configuration for current interface" },
+	{ "disable", hostapd_cli_cmd_disable, NULL,
+	  "= disable hostapd on current interface" },
+	{ "erp_flush", hostapd_cli_cmd_erp_flush, NULL,
+	  "= drop pending ERP keys"},
+	{ "log_level", hostapd_cli_cmd_log_level, NULL,
+	  "[level] = show/change log verbosity level" },
+	{ "pmksa", hostapd_cli_cmd_pmksa, NULL,
+	  " = show PMKSA cache entries" },
+	{ "pmksa_flush", hostapd_cli_cmd_pmksa_flush, NULL,
+	  " = flush PMKSA cache" },
+	{ "set_neighbor", hostapd_cli_cmd_set_neighbor, NULL,
+	  "<addr> <ssid=> <nr=> [lci=] [civic=] [stat]\n"
+	  "  = add AP to neighbor database" },
+	{ "remove_neighbor", hostapd_cli_cmd_remove_neighbor, NULL,
+	  "<addr> <ssid=> = remove AP from neighbor database" },
+	{ "req_lci", hostapd_cli_cmd_req_lci, NULL,
+	  "<addr> = send LCI request to a station"},
+	{ "req_range", hostapd_cli_cmd_req_range, NULL,
+	  " = send FTM range request"},
+	{ "driver_flags", hostapd_cli_cmd_driver_flags, NULL,
+	  " = show supported driver flags"},
 	{ NULL, NULL, NULL, NULL }
 };
 
-- 
2.10.1.502.g6598894




More information about the Hostap mailing list