[PATCH v2 10/17] tests: use hapd from hostapd.add_ap()
Janusz Dziedzic
janusz.dziedzic at tieto.com
Wed Apr 6 22:38:08 PDT 2016
Part 2
Signed-off-by: Janusz Dziedzic <janusz.dziedzic at tieto.com>
---
tests/hwsim/test_ap_hs20.py | 3 +-
tests/hwsim/test_ap_pmf.py | 1 -
tests/hwsim/test_ap_tdls.py | 10 +-
tests/hwsim/test_ap_wps.py | 299 +++++++++++++++++++-------------------------
tests/hwsim/test_gas.py | 3 +-
tests/hwsim/test_nfc_wps.py | 79 +++++-------
6 files changed, 169 insertions(+), 226 deletions(-)
diff --git a/tests/hwsim/test_ap_hs20.py b/tests/hwsim/test_ap_hs20.py
index a4e6179..a3b61b2 100644
--- a/tests/hwsim/test_ap_hs20.py
+++ b/tests/hwsim/test_ap_hs20.py
@@ -1040,8 +1040,7 @@ def test_ap_hs20_gas_frag_while_associated(dev, apdev):
bssid = apdev[0]['bssid']
params = hs20_ap_params()
params['hessid'] = bssid
- hostapd.add_ap(apdev[0], params)
- hapd = hostapd.Hostapd(apdev[0]['ifname'])
+ hapd = hostapd.add_ap(apdev[0], params)
hapd.set("gas_frag_limit", "50")
dev[0].hs20_enable()
diff --git a/tests/hwsim/test_ap_pmf.py b/tests/hwsim/test_ap_pmf.py
index 69bc3d4..7086b74 100644
--- a/tests/hwsim/test_ap_pmf.py
+++ b/tests/hwsim/test_ap_pmf.py
@@ -38,7 +38,6 @@ def test_ap_pmf_required(dev, apdev):
key_mgmt="WPA-PSK WPA-PSK-SHA256", proto="WPA2",
scan_freq="2412")
hwsim_utils.test_connectivity(dev[1], hapd)
- hapd = hostapd.Hostapd(apdev[0]['ifname'])
hapd.request("SA_QUERY " + dev[0].p2p_interface_addr())
hapd.request("SA_QUERY " + dev[1].p2p_interface_addr())
wt.require_ap_pmf_mandatory(apdev[0]['bssid'])
diff --git a/tests/hwsim/test_ap_tdls.py b/tests/hwsim/test_ap_tdls.py
index 71a6521..1823287 100644
--- a/tests/hwsim/test_ap_tdls.py
+++ b/tests/hwsim/test_ap_tdls.py
@@ -103,9 +103,8 @@ def check_connectivity(sta0, sta1, hapd):
hwsim_utils.test_connectivity(sta0, hapd)
hwsim_utils.test_connectivity(sta1, hapd)
-def setup_tdls(sta0, sta1, ap, reverse=False, expect_fail=False):
+def setup_tdls(sta0, sta1, hapd, reverse=False, expect_fail=False):
logger.info("Setup TDLS")
- hapd = hostapd.Hostapd(ap['ifname'])
check_connectivity(sta0, sta1, hapd)
bssid = ap['bssid']
addr0 = sta0.p2p_interface_addr()
@@ -127,9 +126,8 @@ def setup_tdls(sta0, sta1, ap, reverse=False, expect_fail=False):
tdls_check_dl(sta0, sta1, bssid, addr0, addr1)
check_connectivity(sta0, sta1, hapd)
-def teardown_tdls(sta0, sta1, ap, responder=False, wildcard=False):
+def teardown_tdls(sta0, sta1, hapd, responder=False, wildcard=False):
logger.info("Teardown TDLS")
- hapd = hostapd.Hostapd(ap['ifname'])
check_connectivity(sta0, sta1, hapd)
bssid = ap['bssid']
addr0 = sta0.p2p_interface_addr()
@@ -544,9 +542,9 @@ def test_ap_tdls_link_status(dev, apdev):
wlantest_setup()
connect_2sta_wpa2_psk(dev, hapd)
check_tdls_link(dev[0], dev[1], connected=False)
- setup_tdls(dev[0], dev[1], apdev[0])
+ setup_tdls(dev[0], dev[1], hapd)
check_tdls_link(dev[0], dev[1], connected=True)
- teardown_tdls(dev[0], dev[1], apdev[0])
+ teardown_tdls(dev[0], dev[1], hapd)
check_tdls_link(dev[0], dev[1], connected=False)
if "FAIL" not in dev[0].request("TDLS_LINK_STATUS foo"):
raise Exception("Unexpected TDLS_LINK_STATUS response for invalid argument")
diff --git a/tests/hwsim/test_ap_wps.py b/tests/hwsim/test_ap_wps.py
index 405b419..bef82fe 100644
--- a/tests/hwsim/test_ap_wps.py
+++ b/tests/hwsim/test_ap_wps.py
@@ -41,9 +41,8 @@ def wps_start_ap(apdev, ssid="test-wps-conf"):
def test_ap_wps_init(dev, apdev):
"""Initial AP configuration with first WPS Enrollee"""
ssid = "test-wps"
- hostapd.add_ap(apdev[0],
- { "ssid": ssid, "eap_server": "1", "wps_state": "1" })
- hapd = hostapd.Hostapd(apdev[0]['ifname'])
+ hapd = hostapd.add_ap(apdev[0],
+ { "ssid": ssid, "eap_server": "1", "wps_state": "1" })
logger.info("WPS provisioning step")
hapd.request("WPS_PBC")
if "PBC Status: Active" not in hapd.request("WPS_GET_STATUS"):
@@ -98,9 +97,8 @@ def test_ap_wps_init_2ap_pbc(dev, apdev):
"""Initial two-radio AP configuration with first WPS PBC Enrollee"""
ssid = "test-wps"
params = { "ssid": ssid, "eap_server": "1", "wps_state": "1" }
- hostapd.add_ap(apdev[0], params)
+ hapd = hostapd.add_ap(apdev[0], params)
hostapd.add_ap(apdev[1], params)
- hapd = hostapd.Hostapd(apdev[0]['ifname'])
logger.info("WPS provisioning step")
hapd.request("WPS_PBC")
dev[0].scan_for_bss(apdev[0]['bssid'], freq="2412", force_scan=True)
@@ -135,9 +133,8 @@ def test_ap_wps_init_2ap_pin(dev, apdev):
"""Initial two-radio AP configuration with first WPS PIN Enrollee"""
ssid = "test-wps"
params = { "ssid": ssid, "eap_server": "1", "wps_state": "1" }
- hostapd.add_ap(apdev[0], params)
+ hapd = hostapd.add_ap(apdev[0], params)
hostapd.add_ap(apdev[1], params)
- hapd = hostapd.Hostapd(apdev[0]['ifname'])
logger.info("WPS provisioning step")
pin = dev[0].wps_read_pin()
hapd.request("WPS_PIN any " + pin)
@@ -165,9 +162,8 @@ def test_ap_wps_init_2ap_pin(dev, apdev):
def test_ap_wps_init_through_wps_config(dev, apdev):
"""Initial AP configuration using wps_config command"""
ssid = "test-wps-init-config"
- hostapd.add_ap(apdev[0],
- { "ssid": ssid, "eap_server": "1", "wps_state": "1" })
- hapd = hostapd.Hostapd(apdev[0]['ifname'])
+ hapd = hostapd.add_ap(apdev[0],
+ { "ssid": ssid, "eap_server": "1", "wps_state": "1" })
if "FAIL" in hapd.request("WPS_CONFIG " + ssid.encode("hex") + " WPA2PSK CCMP " + "12345678".encode("hex")):
raise Exception("WPS_CONFIG command failed")
ev = hapd.wait_event(["WPS-NEW-AP-SETTINGS"], timeout=5)
@@ -184,10 +180,9 @@ def test_ap_wps_init_through_wps_config(dev, apdev):
def test_ap_wps_init_through_wps_config_2(dev, apdev):
"""AP configuration using wps_config and wps_cred_processing=2"""
ssid = "test-wps-init-config"
- hostapd.add_ap(apdev[0],
- { "ssid": ssid, "eap_server": "1", "wps_state": "1",
- "wps_cred_processing": "2" })
- hapd = hostapd.Hostapd(apdev[0]['ifname'])
+ hapd = hostapd.add_ap(apdev[0],
+ { "ssid": ssid, "eap_server": "1", "wps_state": "1",
+ "wps_cred_processing": "2" })
if "FAIL" in hapd.request("WPS_CONFIG " + ssid.encode("hex") + " WPA2PSK CCMP " + "12345678".encode("hex")):
raise Exception("WPS_CONFIG command failed")
ev = hapd.wait_event(["WPS-NEW-AP-SETTINGS"], timeout=5)
@@ -199,20 +194,18 @@ def test_ap_wps_init_through_wps_config_2(dev, apdev):
def test_ap_wps_invalid_wps_config_passphrase(dev, apdev):
"""AP configuration using wps_config command with invalid passphrase"""
ssid = "test-wps-init-config"
- hostapd.add_ap(apdev[0],
- { "ssid": ssid, "eap_server": "1", "wps_state": "1" })
- hapd = hostapd.Hostapd(apdev[0]['ifname'])
+ hapd = hostapd.add_ap(apdev[0],
+ { "ssid": ssid, "eap_server": "1", "wps_state": "1" })
if "FAIL" not in hapd.request("WPS_CONFIG " + ssid.encode("hex") + " WPA2PSK CCMP " + "1234567".encode("hex")):
raise Exception("Invalid WPS_CONFIG command accepted")
def test_ap_wps_conf(dev, apdev):
"""WPS PBC provisioning with configured AP"""
ssid = "test-wps-conf"
- hostapd.add_ap(apdev[0],
- { "ssid": ssid, "eap_server": "1", "wps_state": "2",
- "wpa_passphrase": "12345678", "wpa": "2",
- "wpa_key_mgmt": "WPA-PSK", "rsn_pairwise": "CCMP"})
- hapd = hostapd.Hostapd(apdev[0]['ifname'])
+ hapd = hostapd.add_ap(apdev[0],
+ { "ssid": ssid, "eap_server": "1", "wps_state": "2",
+ "wpa_passphrase": "12345678", "wpa": "2",
+ "wpa_key_mgmt": "WPA-PSK", "rsn_pairwise": "CCMP"})
logger.info("WPS provisioning step")
hapd.request("WPS_PBC")
dev[0].scan_for_bss(apdev[0]['bssid'], freq="2412")
@@ -317,11 +310,10 @@ def test_ap_wps_twice(dev, apdev):
def test_ap_wps_incorrect_pin(dev, apdev):
"""WPS PIN provisioning with incorrect PIN"""
ssid = "test-wps-incorrect-pin"
- hostapd.add_ap(apdev[0],
- { "ssid": ssid, "eap_server": "1", "wps_state": "2",
- "wpa_passphrase": "12345678", "wpa": "2",
- "wpa_key_mgmt": "WPA-PSK", "rsn_pairwise": "CCMP"})
- hapd = hostapd.Hostapd(apdev[0]['ifname'])
+ hapd = hostapd.add_ap(apdev[0],
+ { "ssid": ssid, "eap_server": "1", "wps_state": "2",
+ "wpa_passphrase": "12345678", "wpa": "2",
+ "wpa_key_mgmt": "WPA-PSK", "rsn_pairwise": "CCMP"})
logger.info("WPS provisioning attempt 1")
hapd.request("WPS_PIN any 12345670")
@@ -360,11 +352,10 @@ def test_ap_wps_incorrect_pin(dev, apdev):
def test_ap_wps_conf_pin(dev, apdev):
"""WPS PIN provisioning with configured AP"""
ssid = "test-wps-conf-pin"
- hostapd.add_ap(apdev[0],
- { "ssid": ssid, "eap_server": "1", "wps_state": "2",
- "wpa_passphrase": "12345678", "wpa": "2",
- "wpa_key_mgmt": "WPA-PSK", "rsn_pairwise": "CCMP"})
- hapd = hostapd.Hostapd(apdev[0]['ifname'])
+ hapd = hostapd.add_ap(apdev[0],
+ { "ssid": ssid, "eap_server": "1", "wps_state": "2",
+ "wpa_passphrase": "12345678", "wpa": "2",
+ "wpa_key_mgmt": "WPA-PSK", "rsn_pairwise": "CCMP"})
logger.info("WPS provisioning step")
pin = dev[0].wps_read_pin()
hapd.request("WPS_PIN any " + pin)
@@ -399,12 +390,11 @@ def test_ap_wps_conf_pin(dev, apdev):
def test_ap_wps_conf_pin_mixed_mode(dev, apdev):
"""WPS PIN provisioning with configured AP (WPA+WPA2)"""
ssid = "test-wps-conf-pin-mixed"
- hostapd.add_ap(apdev[0],
- { "ssid": ssid, "eap_server": "1", "wps_state": "2",
- "wpa_passphrase": "12345678", "wpa": "3",
- "wpa_key_mgmt": "WPA-PSK", "rsn_pairwise": "CCMP",
- "wpa_pairwise": "TKIP" })
- hapd = hostapd.Hostapd(apdev[0]['ifname'])
+ hapd = hostapd.add_ap(apdev[0],
+ { "ssid": ssid, "eap_server": "1", "wps_state": "2",
+ "wpa_passphrase": "12345678", "wpa": "3",
+ "wpa_key_mgmt": "WPA-PSK", "rsn_pairwise": "CCMP",
+ "wpa_pairwise": "TKIP" })
logger.info("WPS provisioning step")
pin = dev[0].wps_read_pin()
@@ -457,11 +447,10 @@ def test_ap_wps_conf_pin_mixed_mode(dev, apdev):
def test_ap_wps_conf_pin_v1(dev, apdev):
"""WPS PIN provisioning with configured WPS v1.0 AP"""
ssid = "test-wps-conf-pin-v1"
- hostapd.add_ap(apdev[0],
- { "ssid": ssid, "eap_server": "1", "wps_state": "2",
- "wpa_passphrase": "12345678", "wpa": "2",
- "wpa_key_mgmt": "WPA-PSK", "rsn_pairwise": "CCMP"})
- hapd = hostapd.Hostapd(apdev[0]['ifname'])
+ hapd = hostapd.add_ap(apdev[0],
+ { "ssid": ssid, "eap_server": "1", "wps_state": "2",
+ "wpa_passphrase": "12345678", "wpa": "2",
+ "wpa_key_mgmt": "WPA-PSK", "rsn_pairwise": "CCMP"})
logger.info("WPS provisioning step")
pin = dev[0].wps_read_pin()
hapd.request("SET wps_version_number 0x10")
@@ -483,11 +472,10 @@ def test_ap_wps_conf_pin_v1(dev, apdev):
def test_ap_wps_conf_pin_2sta(dev, apdev):
"""Two stations trying to use WPS PIN at the same time"""
ssid = "test-wps-conf-pin2"
- hostapd.add_ap(apdev[0],
- { "ssid": ssid, "eap_server": "1", "wps_state": "2",
- "wpa_passphrase": "12345678", "wpa": "2",
- "wpa_key_mgmt": "WPA-PSK", "rsn_pairwise": "CCMP"})
- hapd = hostapd.Hostapd(apdev[0]['ifname'])
+ hapd = hostapd.add_ap(apdev[0],
+ { "ssid": ssid, "eap_server": "1", "wps_state": "2",
+ "wpa_passphrase": "12345678", "wpa": "2",
+ "wpa_key_mgmt": "WPA-PSK", "rsn_pairwise": "CCMP"})
logger.info("WPS provisioning step")
pin = "12345670"
pin2 = "55554444"
@@ -505,11 +493,10 @@ def test_ap_wps_conf_pin_2sta(dev, apdev):
def test_ap_wps_conf_pin_timeout(dev, apdev):
"""WPS PIN provisioning with configured AP timing out PIN"""
ssid = "test-wps-conf-pin"
- hostapd.add_ap(apdev[0],
- { "ssid": ssid, "eap_server": "1", "wps_state": "2",
- "wpa_passphrase": "12345678", "wpa": "2",
- "wpa_key_mgmt": "WPA-PSK", "rsn_pairwise": "CCMP"})
- hapd = hostapd.Hostapd(apdev[0]['ifname'])
+ hapd = hostapd.add_ap(apdev[0],
+ { "ssid": ssid, "eap_server": "1", "wps_state": "2",
+ "wpa_passphrase": "12345678", "wpa": "2",
+ "wpa_key_mgmt": "WPA-PSK", "rsn_pairwise": "CCMP"})
addr = dev[0].p2p_interface_addr()
pin = dev[0].wps_read_pin()
if "FAIL" not in hapd.request("WPS_PIN "):
@@ -620,17 +607,16 @@ def test_ap_wps_random_ap_pin(dev, apdev):
"""WPS registrar using random AP PIN"""
ssid = "test-wps-reg-random-ap-pin"
ap_uuid = "27ea801a-9e5c-4e73-bd82-f89cbcd10d7e"
- hostapd.add_ap(apdev[0],
- { "ssid": ssid, "eap_server": "1", "wps_state": "2",
- "wpa_passphrase": "12345678", "wpa": "2",
- "wpa_key_mgmt": "WPA-PSK", "rsn_pairwise": "CCMP",
- "device_name": "Wireless AP", "manufacturer": "Company",
- "model_name": "WAP", "model_number": "123",
- "serial_number": "12345", "device_type": "6-0050F204-1",
- "os_version": "01020300",
- "config_methods": "label push_button",
- "uuid": ap_uuid, "upnp_iface": "lo" })
- hapd = hostapd.Hostapd(apdev[0]['ifname'])
+ hapd = hostapd.add_ap(apdev[0],
+ { "ssid": ssid, "eap_server": "1", "wps_state": "2",
+ "wpa_passphrase": "12345678", "wpa": "2",
+ "wpa_key_mgmt": "WPA-PSK", "rsn_pairwise": "CCMP",
+ "device_name": "Wireless AP", "manufacturer": "Company",
+ "model_name": "WAP", "model_number": "123",
+ "serial_number": "12345", "device_type": "6-0050F204-1",
+ "os_version": "01020300",
+ "config_methods": "label push_button",
+ "uuid": ap_uuid, "upnp_iface": "lo" })
appin = hapd.request("WPS_AP_PIN random")
if "FAIL" in appin:
raise Exception("Could not generate random AP PIN")
@@ -777,11 +763,11 @@ def test_ap_wps_setup_locked(dev, apdev):
"""WPS registrar locking up AP setup on AP PIN failures"""
ssid = "test-wps-incorrect-ap-pin"
appin = "12345670"
- hostapd.add_ap(apdev[0],
- { "ssid": ssid, "eap_server": "1", "wps_state": "2",
- "wpa_passphrase": "12345678", "wpa": "2",
- "wpa_key_mgmt": "WPA-PSK", "rsn_pairwise": "CCMP",
- "ap_pin": appin})
+ hapd = hostapd.add_ap(apdev[0],
+ { "ssid": ssid, "eap_server": "1", "wps_state": "2",
+ "wpa_passphrase": "12345678", "wpa": "2",
+ "wpa_key_mgmt": "WPA-PSK", "rsn_pairwise": "CCMP",
+ "ap_pin": appin})
new_ssid = "wps-new-ssid-test"
new_passphrase = "1234567890"
@@ -814,7 +800,6 @@ def test_ap_wps_setup_locked(dev, apdev):
logger.info("BSS: " + str(bss))
raise Exception("AP Setup Locked not indicated in scan results")
- hapd = hostapd.Hostapd(apdev[0]['ifname'])
status = hapd.request("WPS_GET_STATUS")
if "Last WPS result: Failed" not in status:
raise Exception("WPS failure result not shown correctly")
@@ -825,7 +810,6 @@ def test_ap_wps_setup_locked(dev, apdev):
dev[0].dump_monitor()
logger.info("WPS provisioning step")
pin = dev[0].wps_read_pin()
- hapd = hostapd.Hostapd(apdev[0]['ifname'])
hapd.request("WPS_PIN any " + pin)
dev[0].request("WPS_PIN %s %s" % (apdev[0]['bssid'], pin))
ev = dev[0].wait_event(["WPS-SUCCESS"], timeout=30)
@@ -844,11 +828,11 @@ def test_ap_wps_setup_locked_timeout(dev, apdev):
"""WPS re-enabling AP PIN after timeout"""
ssid = "test-wps-incorrect-ap-pin"
appin = "12345670"
- hostapd.add_ap(apdev[0],
- { "ssid": ssid, "eap_server": "1", "wps_state": "2",
- "wpa_passphrase": "12345678", "wpa": "2",
- "wpa_key_mgmt": "WPA-PSK", "rsn_pairwise": "CCMP",
- "ap_pin": appin})
+ hapd = hostapd.add_ap(apdev[0],
+ { "ssid": ssid, "eap_server": "1", "wps_state": "2",
+ "wpa_passphrase": "12345678", "wpa": "2",
+ "wpa_key_mgmt": "WPA-PSK", "rsn_pairwise": "CCMP",
+ "ap_pin": appin})
new_ssid = "wps-new-ssid-test"
new_passphrase = "1234567890"
@@ -874,7 +858,6 @@ def test_ap_wps_setup_locked_timeout(dev, apdev):
time.sleep(0.1)
if not ap_setup_locked:
raise Exception("AP setup was not locked")
- hapd = hostapd.Hostapd(apdev[0]['ifname'])
ev = hapd.wait_event(["WPS-AP-SETUP-UNLOCKED"], timeout=80)
if ev is None:
raise Exception("AP PIN did not get unlocked on 60 second timeout")
@@ -919,19 +902,17 @@ def test_ap_wps_setup_locked_2(dev, apdev):
def test_ap_wps_pbc_overlap_2ap(dev, apdev):
"""WPS PBC session overlap with two active APs"""
- hostapd.add_ap(apdev[0],
- { "ssid": "wps1", "eap_server": "1", "wps_state": "2",
- "wpa_passphrase": "12345678", "wpa": "2",
- "wpa_key_mgmt": "WPA-PSK", "rsn_pairwise": "CCMP",
- "wps_independent": "1"})
- hostapd.add_ap(apdev[1],
- { "ssid": "wps2", "eap_server": "1", "wps_state": "2",
- "wpa_passphrase": "123456789", "wpa": "2",
- "wpa_key_mgmt": "WPA-PSK", "rsn_pairwise": "CCMP",
- "wps_independent": "1"})
- hapd = hostapd.Hostapd(apdev[0]['ifname'])
+ hapd = hostapd.add_ap(apdev[0],
+ { "ssid": "wps1", "eap_server": "1", "wps_state": "2",
+ "wpa_passphrase": "12345678", "wpa": "2",
+ "wpa_key_mgmt": "WPA-PSK", "rsn_pairwise": "CCMP",
+ "wps_independent": "1"})
+ hapd2 = hostapd.add_ap(apdev[1],
+ { "ssid": "wps2", "eap_server": "1", "wps_state": "2",
+ "wpa_passphrase": "123456789", "wpa": "2",
+ "wpa_key_mgmt": "WPA-PSK", "rsn_pairwise": "CCMP",
+ "wps_independent": "1"})
hapd.request("WPS_PBC")
- hapd2 = hostapd.Hostapd(apdev[1]['ifname'])
hapd2.request("WPS_PBC")
logger.info("WPS provisioning step")
dev[0].scan_for_bss(apdev[0]['bssid'], freq="2412", force_scan=True)
@@ -947,11 +928,10 @@ def test_ap_wps_pbc_overlap_2ap(dev, apdev):
def test_ap_wps_pbc_overlap_2sta(dev, apdev):
"""WPS PBC session overlap with two active STAs"""
ssid = "test-wps-pbc-overlap"
- hostapd.add_ap(apdev[0],
- { "ssid": ssid, "eap_server": "1", "wps_state": "2",
- "wpa_passphrase": "12345678", "wpa": "2",
- "wpa_key_mgmt": "WPA-PSK", "rsn_pairwise": "CCMP"})
- hapd = hostapd.Hostapd(apdev[0]['ifname'])
+ hapd = hostapd.add_ap(apdev[0],
+ { "ssid": ssid, "eap_server": "1", "wps_state": "2",
+ "wpa_passphrase": "12345678", "wpa": "2",
+ "wpa_key_mgmt": "WPA-PSK", "rsn_pairwise": "CCMP"})
logger.info("WPS provisioning step")
hapd.request("WPS_PBC")
dev[0].scan_for_bss(apdev[0]['bssid'], freq="2412")
@@ -985,12 +965,11 @@ def test_ap_wps_pbc_overlap_2sta(dev, apdev):
def test_ap_wps_cancel(dev, apdev):
"""WPS AP cancelling enabled config method"""
ssid = "test-wps-ap-cancel"
- hostapd.add_ap(apdev[0],
- { "ssid": ssid, "eap_server": "1", "wps_state": "2",
- "wpa_passphrase": "12345678", "wpa": "2",
- "wpa_key_mgmt": "WPA-PSK", "rsn_pairwise": "CCMP" })
+ hapd = hostapd.add_ap(apdev[0],
+ { "ssid": ssid, "eap_server": "1", "wps_state": "2",
+ "wpa_passphrase": "12345678", "wpa": "2",
+ "wpa_key_mgmt": "WPA-PSK", "rsn_pairwise": "CCMP" })
bssid = apdev[0]['bssid']
- hapd = hostapd.Hostapd(apdev[0]['ifname'])
logger.info("Verify PBC enable/cancel")
hapd.request("WPS_PBC")
@@ -1908,13 +1887,12 @@ def test_ap_wps_fragmentation(dev, apdev):
"""WPS with fragmentation in EAP-WSC and mixed mode WPA+WPA2"""
ssid = "test-wps-fragmentation"
appin = "12345670"
- hostapd.add_ap(apdev[0],
- { "ssid": ssid, "eap_server": "1", "wps_state": "2",
- "wpa_passphrase": "12345678", "wpa": "3",
- "wpa_key_mgmt": "WPA-PSK", "rsn_pairwise": "CCMP",
- "wpa_pairwise": "TKIP", "ap_pin": appin,
- "fragment_size": "50" })
- hapd = hostapd.Hostapd(apdev[0]['ifname'])
+ hapd = hostapd.add_ap(apdev[0],
+ { "ssid": ssid, "eap_server": "1", "wps_state": "2",
+ "wpa_passphrase": "12345678", "wpa": "3",
+ "wpa_key_mgmt": "WPA-PSK", "rsn_pairwise": "CCMP",
+ "wpa_pairwise": "TKIP", "ap_pin": appin,
+ "fragment_size": "50" })
logger.info("WPS provisioning step (PBC)")
hapd.request("WPS_PBC")
dev[0].scan_for_bss(apdev[0]['bssid'], freq=2412)
@@ -1960,11 +1938,10 @@ def test_ap_wps_fragmentation(dev, apdev):
def test_ap_wps_new_version_sta(dev, apdev):
"""WPS compatibility with new version number on the station"""
ssid = "test-wps-ver"
- hostapd.add_ap(apdev[0],
- { "ssid": ssid, "eap_server": "1", "wps_state": "2",
- "wpa_passphrase": "12345678", "wpa": "2",
- "wpa_key_mgmt": "WPA-PSK", "rsn_pairwise": "CCMP" })
- hapd = hostapd.Hostapd(apdev[0]['ifname'])
+ hapd = hostapd.add_ap(apdev[0],
+ { "ssid": ssid, "eap_server": "1", "wps_state": "2",
+ "wpa_passphrase": "12345678", "wpa": "2",
+ "wpa_key_mgmt": "WPA-PSK", "rsn_pairwise": "CCMP" })
logger.info("WPS provisioning step")
hapd.request("WPS_PBC")
dev[0].scan_for_bss(apdev[0]['bssid'], freq="2412")
@@ -1977,11 +1954,10 @@ def test_ap_wps_new_version_sta(dev, apdev):
def test_ap_wps_new_version_ap(dev, apdev):
"""WPS compatibility with new version number on the AP"""
ssid = "test-wps-ver"
- hostapd.add_ap(apdev[0],
- { "ssid": ssid, "eap_server": "1", "wps_state": "2",
- "wpa_passphrase": "12345678", "wpa": "2",
- "wpa_key_mgmt": "WPA-PSK", "rsn_pairwise": "CCMP" })
- hapd = hostapd.Hostapd(apdev[0]['ifname'])
+ hapd = hostapd.add_ap(apdev[0],
+ { "ssid": ssid, "eap_server": "1", "wps_state": "2",
+ "wpa_passphrase": "12345678", "wpa": "2",
+ "wpa_key_mgmt": "WPA-PSK", "rsn_pairwise": "CCMP" })
logger.info("WPS provisioning step")
if "FAIL" in hapd.request("SET wps_version_number 0x43"):
raise Exception("Failed to enable test functionality")
@@ -1994,11 +1970,10 @@ def test_ap_wps_new_version_ap(dev, apdev):
def test_ap_wps_check_pin(dev, apdev):
"""Verify PIN checking through control interface"""
- hostapd.add_ap(apdev[0],
- { "ssid": "wps", "eap_server": "1", "wps_state": "2",
- "wpa_passphrase": "12345678", "wpa": "2",
- "wpa_key_mgmt": "WPA-PSK", "rsn_pairwise": "CCMP" })
- hapd = hostapd.Hostapd(apdev[0]['ifname'])
+ hapd = hostapd.add_ap(apdev[0],
+ { "ssid": "wps", "eap_server": "1", "wps_state": "2",
+ "wpa_passphrase": "12345678", "wpa": "2",
+ "wpa_key_mgmt": "WPA-PSK", "rsn_pairwise": "CCMP" })
for t in [ ("12345670", "12345670"),
("12345678", "FAIL-CHECKSUM"),
("12345", "FAIL"),
@@ -2028,10 +2003,9 @@ def test_ap_wps_wep_config(dev, apdev):
"""WPS 2.0 AP rejecting WEP configuration"""
ssid = "test-wps-config"
appin = "12345670"
- hostapd.add_ap(apdev[0],
- { "ssid": ssid, "eap_server": "1", "wps_state": "2",
- "ap_pin": appin})
- hapd = hostapd.Hostapd(apdev[0]['ifname'])
+ hapd = hostapd.add_ap(apdev[0],
+ { "ssid": ssid, "eap_server": "1", "wps_state": "2",
+ "ap_pin": appin})
dev[0].scan_for_bss(apdev[0]['bssid'], freq=2412)
dev[0].wps_reg(apdev[0]['bssid'], appin, "wps-new-ssid-wep", "OPEN", "WEP",
"hello", no_wait=True)
@@ -2051,10 +2025,9 @@ def test_ap_wps_wep_config(dev, apdev):
def test_ap_wps_wep_enroll(dev, apdev):
"""WPS 2.0 STA rejecting WEP configuration"""
ssid = "test-wps-wep"
- hostapd.add_ap(apdev[0],
- { "ssid": ssid, "eap_server": "1", "wps_state": "2",
- "skip_cred_build": "1", "extra_cred": "wps-wep-cred" })
- hapd = hostapd.Hostapd(apdev[0]['ifname'])
+ hapd = hostapd.add_ap(apdev[0],
+ { "ssid": ssid, "eap_server": "1", "wps_state": "2",
+ "skip_cred_build": "1", "extra_cred": "wps-wep-cred" })
hapd.request("WPS_PBC")
dev[0].scan_for_bss(apdev[0]['bssid'], freq=2412)
dev[0].request("WPS_PBC " + apdev[0]['bssid'])
@@ -2075,8 +2048,7 @@ def test_ap_wps_ie_fragmentation(dev, apdev):
"model_name": "1234567890abcdef1234567890abcdef",
"model_number": "1234567890abcdef1234567890abcdef",
"serial_number": "1234567890abcdef1234567890abcdef" }
- hostapd.add_ap(apdev[0], params)
- hapd = hostapd.Hostapd(apdev[0]['ifname'])
+ hapd = hostapd.add_ap(apdev[0], params)
hapd.request("WPS_PBC")
dev[0].scan_for_bss(apdev[0]['bssid'], freq="2412")
dev[0].request("WPS_PBC " + apdev[0]['bssid'])
@@ -2237,12 +2209,11 @@ def test_ap_wps_pin_request_file(dev, apdev):
pinfile = "/tmp/ap_wps_pin_request_file.log"
if os.path.exists(pinfile):
os.remove(pinfile)
- hostapd.add_ap(apdev[0],
- { "ssid": ssid, "eap_server": "1", "wps_state": "2",
- "wps_pin_requests": pinfile,
- "wpa_passphrase": "12345678", "wpa": "2",
- "wpa_key_mgmt": "WPA-PSK", "rsn_pairwise": "CCMP"})
- hapd = hostapd.Hostapd(apdev[0]['ifname'])
+ hapd = hostapd.add_ap(apdev[0],
+ { "ssid": ssid, "eap_server": "1", "wps_state": "2",
+ "wps_pin_requests": pinfile,
+ "wpa_passphrase": "12345678", "wpa": "2",
+ "wpa_key_mgmt": "WPA-PSK", "rsn_pairwise": "CCMP"})
uuid = dev[0].get_status_field("uuid")
pin = dev[0].wps_read_pin()
try:
@@ -2284,8 +2255,7 @@ def test_ap_wps_auto_setup_with_config_file(dev, apdev):
f.write("ssid=wps\n")
f.write("eap_server=1\n")
f.write("wps_state=1\n")
- hostapd.add_bss(apdev[0], ifname, conffile)
- hapd = hostapd.Hostapd(ifname)
+ hapd = hostapd.add_bss(apdev[0], ifname, conffile)
hapd.request("WPS_PBC")
dev[0].scan_for_bss(apdev[0]['bssid'], freq="2412")
dev[0].request("WPS_PBC " + apdev[0]['bssid'])
@@ -3432,8 +3402,7 @@ def test_ap_wps_upnp_http_proto_chunked(dev, apdev):
def test_ap_wps_disabled(dev, apdev):
"""WPS operations while WPS is disabled"""
ssid = "test-wps-disabled"
- hostapd.add_ap(apdev[0], { "ssid": ssid })
- hapd = hostapd.Hostapd(apdev[0]['ifname'])
+ hapd = hostapd.add_ap(apdev[0], { "ssid": ssid })
if "FAIL" not in hapd.request("WPS_PBC"):
raise Exception("WPS_PBC succeeded unexpectedly")
if "FAIL" not in hapd.request("WPS_CANCEL"):
@@ -3442,10 +3411,9 @@ def test_ap_wps_disabled(dev, apdev):
def test_ap_wps_mixed_cred(dev, apdev):
"""WPS 2.0 STA merging mixed mode WPA/WPA2 credentials"""
ssid = "test-wps-wep"
- hostapd.add_ap(apdev[0],
- { "ssid": ssid, "eap_server": "1", "wps_state": "2",
- "skip_cred_build": "1", "extra_cred": "wps-mixed-cred" })
- hapd = hostapd.Hostapd(apdev[0]['ifname'])
+ hapd = hostapd.add_ap(apdev[0],
+ { "ssid": ssid, "eap_server": "1", "wps_state": "2",
+ "skip_cred_build": "1", "extra_cred": "wps-mixed-cred" })
hapd.request("WPS_PBC")
dev[0].scan_for_bss(apdev[0]['bssid'], freq="2412")
dev[0].request("WPS_PBC " + apdev[0]['bssid'])
@@ -3466,11 +3434,10 @@ def test_ap_wps_mixed_cred(dev, apdev):
def test_ap_wps_while_connected(dev, apdev):
"""WPS PBC provisioning while connected to another AP"""
ssid = "test-wps-conf"
- hostapd.add_ap(apdev[0],
- { "ssid": ssid, "eap_server": "1", "wps_state": "2",
- "wpa_passphrase": "12345678", "wpa": "2",
- "wpa_key_mgmt": "WPA-PSK", "rsn_pairwise": "CCMP"})
- hapd = hostapd.Hostapd(apdev[0]['ifname'])
+ hapd = hostapd.add_ap(apdev[0],
+ { "ssid": ssid, "eap_server": "1", "wps_state": "2",
+ "wpa_passphrase": "12345678", "wpa": "2",
+ "wpa_key_mgmt": "WPA-PSK", "rsn_pairwise": "CCMP"})
hostapd.add_ap(apdev[1], { "ssid": "open" })
dev[0].connect("open", key_mgmt="NONE", scan_freq="2412")
@@ -3487,11 +3454,10 @@ def test_ap_wps_while_connected(dev, apdev):
def test_ap_wps_while_connected_no_autoconnect(dev, apdev):
"""WPS PBC provisioning while connected to another AP and STA_AUTOCONNECT disabled"""
ssid = "test-wps-conf"
- hostapd.add_ap(apdev[0],
- { "ssid": ssid, "eap_server": "1", "wps_state": "2",
- "wpa_passphrase": "12345678", "wpa": "2",
- "wpa_key_mgmt": "WPA-PSK", "rsn_pairwise": "CCMP"})
- hapd = hostapd.Hostapd(apdev[0]['ifname'])
+ hapd = hostapd.add_ap(apdev[0],
+ { "ssid": ssid, "eap_server": "1", "wps_state": "2",
+ "wpa_passphrase": "12345678", "wpa": "2",
+ "wpa_key_mgmt": "WPA-PSK", "rsn_pairwise": "CCMP"})
hostapd.add_ap(apdev[1], { "ssid": "open" })
@@ -3568,9 +3534,8 @@ def test_ap_wps_ap_scan_2(dev, apdev):
def test_ap_wps_eapol_workaround(dev, apdev):
"""EAPOL workaround code path for 802.1X header length mismatch"""
ssid = "test-wps"
- hostapd.add_ap(apdev[0],
- { "ssid": ssid, "eap_server": "1", "wps_state": "1" })
- hapd = hostapd.Hostapd(apdev[0]['ifname'])
+ hapd = hostapd.add_ap(apdev[0],
+ { "ssid": ssid, "eap_server": "1", "wps_state": "1" })
bssid = apdev[0]['bssid']
hapd.request("SET ext_eapol_frame_io 1")
dev[0].request("SET ext_eapol_frame_io 1")
@@ -3675,11 +3640,10 @@ def test_ap_wps_iteration_error(dev, apdev):
def test_ap_wps_priority(dev, apdev):
"""WPS PIN provisioning with configured AP and wps_priority"""
ssid = "test-wps-conf-pin"
- hostapd.add_ap(apdev[0],
- { "ssid": ssid, "eap_server": "1", "wps_state": "2",
- "wpa_passphrase": "12345678", "wpa": "2",
- "wpa_key_mgmt": "WPA-PSK", "rsn_pairwise": "CCMP"})
- hapd = hostapd.Hostapd(apdev[0]['ifname'])
+ hapd = hostapd.add_ap(apdev[0],
+ { "ssid": ssid, "eap_server": "1", "wps_state": "2",
+ "wpa_passphrase": "12345678", "wpa": "2",
+ "wpa_key_mgmt": "WPA-PSK", "rsn_pairwise": "CCMP"})
logger.info("WPS provisioning step")
pin = dev[0].wps_read_pin()
hapd.request("WPS_PIN any " + pin)
@@ -3828,11 +3792,10 @@ def test_ap_wps_wpa_cli_action(dev, apdev, test_params):
stat.S_IRGRP | stat.S_IXGRP | stat.S_IROTH | stat.S_IXOTH)
ssid = "test-wps-conf"
- hostapd.add_ap(apdev[0],
- { "ssid": ssid, "eap_server": "1", "wps_state": "2",
- "wpa_passphrase": "12345678", "wpa": "2",
- "wpa_key_mgmt": "WPA-PSK", "rsn_pairwise": "CCMP"})
- hapd = hostapd.Hostapd(apdev[0]['ifname'])
+ hapd = hostapd.add_ap(apdev[0],
+ { "ssid": ssid, "eap_server": "1", "wps_state": "2",
+ "wpa_passphrase": "12345678", "wpa": "2",
+ "wpa_key_mgmt": "WPA-PSK", "rsn_pairwise": "CCMP"})
prg = os.path.join(test_params['logdir'],
'alt-wpa_supplicant/wpa_supplicant/wpa_cli')
diff --git a/tests/hwsim/test_gas.py b/tests/hwsim/test_gas.py
index f44d718..2d45fd3 100644
--- a/tests/hwsim/test_gas.py
+++ b/tests/hwsim/test_gas.py
@@ -52,8 +52,7 @@ def hs20_ap_params():
def start_ap(ap):
params = hs20_ap_params()
params['hessid'] = ap['bssid']
- hostapd.add_ap(ap, params)
- return hostapd.Hostapd(ap['ifname'])
+ return hostapd.add_ap(ap, params)
def get_gas_response(dev, bssid, info, allow_fetch_failure=False,
extra_test=False):
diff --git a/tests/hwsim/test_nfc_wps.py b/tests/hwsim/test_nfc_wps.py
index 5f7add8..ea5d602 100644
--- a/tests/hwsim/test_nfc_wps.py
+++ b/tests/hwsim/test_nfc_wps.py
@@ -38,8 +38,7 @@ def test_nfc_wps_password_token_sta(dev, apdev):
"""NFC tag with password token on the station/Enrollee"""
ssid = "test-wps-nfc-pw-token-conf"
params = ap_wps_params(ssid)
- hostapd.add_ap(apdev[0], params)
- hapd = hostapd.Hostapd(apdev[0]['ifname'])
+ hapd = hostapd.add_ap(apdev[0], params)
logger.info("WPS provisioning step using password token from station")
wps = dev[0].request("WPS_NFC_TOKEN WPS").rstrip()
if "FAIL" in wps:
@@ -61,8 +60,7 @@ def test_nfc_wps_config_token(dev, apdev):
"""NFC tag with configuration token from AP"""
ssid = "test-wps-nfc-conf-token"
params = ap_wps_params(ssid)
- hostapd.add_ap(apdev[0], params)
- hapd = hostapd.Hostapd(apdev[0]['ifname'])
+ hapd = hostapd.add_ap(apdev[0], params)
logger.info("NFC configuration token from AP to station")
conf = hapd.request("WPS_NFC_CONFIG_TOKEN NDEF").rstrip()
if "FAIL" in conf:
@@ -82,9 +80,8 @@ def test_nfc_wps_config_token(dev, apdev):
def test_nfc_wps_config_token_init(dev, apdev):
"""NFC tag with configuration token from AP with auto configuration"""
ssid = "test-wps-nfc-conf-token-init"
- hostapd.add_ap(apdev[0],
- { "ssid": ssid, "eap_server": "1", "wps_state": "1" })
- hapd = hostapd.Hostapd(apdev[0]['ifname'])
+ hapd = hostapd.add_ap(apdev[0],
+ { "ssid": ssid, "eap_server": "1", "wps_state": "1" })
logger.info("NFC configuration token from AP to station")
conf = hapd.request("WPS_NFC_CONFIG_TOKEN NDEF").rstrip()
if "FAIL" in conf:
@@ -99,9 +96,8 @@ def test_nfc_wps_config_token_init(dev, apdev):
def test_nfc_wps_password_token_sta_init(dev, apdev):
"""Initial AP configuration with first WPS NFC Enrollee"""
ssid = "test-wps-nfc-pw-token-init"
- hostapd.add_ap(apdev[0],
- { "ssid": ssid, "eap_server": "1", "wps_state": "1" })
- hapd = hostapd.Hostapd(apdev[0]['ifname'])
+ hapd = hostapd.add_ap(apdev[0],
+ { "ssid": ssid, "eap_server": "1", "wps_state": "1" })
logger.info("WPS provisioning step using password token from station")
pw = dev[0].request("WPS_NFC_TOKEN NDEF").rstrip()
if "FAIL" in pw:
@@ -119,9 +115,8 @@ def test_nfc_wps_password_token_sta_init(dev, apdev):
def test_nfc_wps_password_token_ap(dev, apdev):
"""WPS registrar configuring an AP using AP password token"""
ssid = "test-wps-nfc-pw-token-init"
- hostapd.add_ap(apdev[0],
- { "ssid": ssid, "eap_server": "1", "wps_state": "1" })
- hapd = hostapd.Hostapd(apdev[0]['ifname'])
+ hapd = hostapd.add_ap(apdev[0],
+ { "ssid": ssid, "eap_server": "1", "wps_state": "1" })
logger.info("WPS configuration step")
pw = hapd.request("WPS_NFC_TOKEN NDEF").rstrip()
if "FAIL" in pw:
@@ -162,9 +157,8 @@ def test_nfc_wps_handover_init(dev, apdev):
def _test_nfc_wps_handover_init(dev, apdev):
dev[0].request("SET ignore_old_scan_res 1")
ssid = "test-wps-nfc-handover-init"
- hostapd.add_ap(apdev[0],
- { "ssid": ssid, "eap_server": "1", "wps_state": "1" })
- hapd = hostapd.Hostapd(apdev[0]['ifname'])
+ hapd = hostapd.add_ap(apdev[0],
+ { "ssid": ssid, "eap_server": "1", "wps_state": "1" })
logger.info("NFC connection handover")
req = dev[0].request("NFC_GET_HANDOVER_REQ NDEF WPS-CR").rstrip()
if "FAIL" in req:
@@ -189,9 +183,8 @@ def _test_nfc_wps_handover_init(dev, apdev):
def test_nfc_wps_handover_errors(dev, apdev):
"""WPS AP NFC handover report error cases"""
ssid = "test-wps-nfc-handover"
- hostapd.add_ap(apdev[0],
- { "ssid": ssid, "eap_server": "1", "wps_state": "1" })
- hapd = hostapd.Hostapd(apdev[0]['ifname'])
+ hapd = hostapd.add_ap(apdev[0],
+ { "ssid": ssid, "eap_server": "1", "wps_state": "1" })
sel = hapd.request("NFC_GET_HANDOVER_SEL NDEF WPS-CR").rstrip()
if "FAIL" in sel:
raise Exception("Failed to generate NFC connection handover select")
@@ -220,8 +213,7 @@ def test_nfc_wps_handover(dev, apdev):
"""Connect to WPS AP with NFC connection handover"""
ssid = "test-wps-nfc-handover"
params = ap_wps_params(ssid)
- hostapd.add_ap(apdev[0], params)
- hapd = hostapd.Hostapd(apdev[0]['ifname'])
+ hapd = hostapd.add_ap(apdev[0], params)
logger.info("NFC connection handover")
req = dev[0].request("NFC_GET_HANDOVER_REQ NDEF WPS-CR").rstrip()
if "FAIL" in req:
@@ -307,8 +299,7 @@ def test_nfc_wps_handover_with_pw_token_set(dev, apdev):
"""Connect to WPS AP with NFC connection handover (wps_nfc_* set)"""
ssid = "test-wps-nfc-handover2"
params = ap_wps_params(ssid)
- hostapd.add_ap(apdev[0], params)
- hapd = hostapd.Hostapd(apdev[0]['ifname'])
+ hapd = hostapd.add_ap(apdev[0], params)
# enable a password token (which won't be used in this test case)
pw = hapd.request("WPS_NFC_TOKEN NDEF").rstrip()
if "FAIL" in pw:
@@ -339,8 +330,7 @@ def test_nfc_wps_handover_pk_hash_mismatch_sta(dev, apdev):
if "FAIL" in dev[0].request("SET wps_corrupt_pkhash 1"):
raise Exception("Could not enable wps_corrupt_pkhash")
params = ap_wps_params(ssid)
- hostapd.add_ap(apdev[0], params)
- hapd = hostapd.Hostapd(apdev[0]['ifname'])
+ hapd = hostapd.add_ap(apdev[0], params)
logger.info("NFC connection handover")
req = dev[0].request("NFC_GET_HANDOVER_REQ NDEF WPS-CR").rstrip()
if "FAIL" in req:
@@ -365,8 +355,7 @@ def test_nfc_wps_handover_pk_hash_mismatch_ap(dev, apdev):
"""WPS NFC connection handover with invalid pkhash from AP (negative)"""
ssid = "wps-nfc-handover-pkhash-ap"
params = ap_wps_params(ssid)
- hostapd.add_ap(apdev[0], params)
- hapd = hostapd.Hostapd(apdev[0]['ifname'])
+ hapd = hostapd.add_ap(apdev[0], params)
if "FAIL" in hapd.request("SET wps_corrupt_pkhash 1"):
raise Exception("Could not enable wps_corrupt_pkhash")
logger.info("NFC connection handover")
@@ -392,16 +381,16 @@ def test_nfc_wps_handover_pk_hash_mismatch_ap(dev, apdev):
def start_ap_er(er, ap, ssid):
ap_pin = "12345670"
ap_uuid = "27ea801a-9e5c-4e73-bd82-f89cbcd10d7e"
- hostapd.add_ap(ap,
- { "ssid": ssid, "eap_server": "1", "wps_state": "2",
- "wpa_passphrase": "12345678", "wpa": "2",
- "wpa_key_mgmt": "WPA-PSK", "rsn_pairwise": "CCMP",
- "device_name": "Wireless AP", "manufacturer": "Company",
- "model_name": "WAP", "model_number": "123",
- "serial_number": "12345", "device_type": "6-0050F204-1",
- "os_version": "01020300",
- "config_methods": "label push_button",
- "ap_pin": ap_pin, "uuid": ap_uuid, "upnp_iface": "lo"})
+ hapd = hostapd.add_ap(ap,
+ { "ssid": ssid, "eap_server": "1", "wps_state": "2",
+ "wpa_passphrase": "12345678", "wpa": "2",
+ "wpa_key_mgmt": "WPA-PSK", "rsn_pairwise": "CCMP",
+ "device_name": "Wireless AP", "manufacturer": "Company",
+ "model_name": "WAP", "model_number": "123",
+ "serial_number": "12345", "device_type": "6-0050F204-1",
+ "os_version": "01020300",
+ "config_methods": "label push_button",
+ "ap_pin": ap_pin, "uuid": ap_uuid, "upnp_iface": "lo"})
logger.info("Learn AP configuration")
er.dump_monitor()
try:
@@ -422,6 +411,7 @@ def start_ap_er(er, ap, ssid):
logger.info("Use learned network configuration on ER")
er.request("WPS_ER_SET_CONFIG " + ap_uuid + " 0")
+ return hapd
def test_nfc_wps_er_pw_token(dev, apdev):
"""WPS NFC password token from Enrollee to ER"""
@@ -433,8 +423,7 @@ def test_nfc_wps_er_pw_token(dev, apdev):
def _test_nfc_wps_er_pw_token(dev, apdev):
ssid = "wps-nfc-er-pw-token"
- start_ap_er(dev[0], apdev[0], ssid)
- hapd = hostapd.Hostapd(apdev[0]['ifname'])
+ hapd = start_ap_er(dev[0], apdev[0], ssid)
logger.info("WPS provisioning step using password token from station")
dev[1].request("SET ignore_old_scan_res 1")
pw = dev[1].request("WPS_NFC_TOKEN NDEF").rstrip()
@@ -463,8 +452,7 @@ def test_nfc_wps_er_config_token(dev, apdev):
def _test_nfc_wps_er_config_token(dev, apdev):
ssid = "wps-nfc-er-config-token"
- start_ap_er(dev[0], apdev[0], ssid)
- hapd = hostapd.Hostapd(apdev[0]['ifname'])
+ hapd = start_ap_er(dev[0], apdev[0], ssid)
logger.info("WPS provisioning step using configuration token from ER")
wps = dev[0].request("WPS_ER_NFC_CONFIG_TOKEN WPS " + apdev[0]['bssid']).rstrip()
if "FAIL" in wps:
@@ -488,8 +476,7 @@ def test_nfc_wps_er_handover(dev, apdev):
def _test_nfc_wps_er_handover(dev, apdev):
ssid = "wps-nfc-er-handover"
- start_ap_er(dev[0], apdev[0], ssid)
- hapd = hostapd.Hostapd(apdev[0]['ifname'])
+ hapd = start_ap_er(dev[0], apdev[0], ssid)
logger.info("WPS provisioning step using connection handover")
req = dev[1].request("NFC_GET_HANDOVER_REQ NDEF WPS-CR").rstrip()
if "FAIL" in req:
@@ -517,8 +504,7 @@ def test_nfc_wps_er_handover_pk_hash_mismatch_sta(dev, apdev):
def _test_nfc_wps_er_handover_pk_hash_mismatch_sta(dev, apdev):
ssid = "wps-nfc-er-handover-pkhash-sta"
- start_ap_er(dev[0], apdev[0], ssid)
- hapd = hostapd.Hostapd(apdev[0]['ifname'])
+ hapd = start_ap_er(dev[0], apdev[0], ssid)
logger.info("WPS provisioning step using connection handover")
if "FAIL" in dev[1].request("SET wps_corrupt_pkhash 1"):
raise Exception("Could not enable wps_corrupt_pkhash")
@@ -552,8 +538,7 @@ def test_nfc_wps_er_handover_pk_hash_mismatch_er(dev, apdev):
def _test_nfc_wps_er_handover_pk_hash_mismatch_er(dev, apdev):
ssid = "wps-nfc-er-handover-pkhash-er"
- start_ap_er(dev[0], apdev[0], ssid)
- hapd = hostapd.Hostapd(apdev[0]['ifname'])
+ hapd = start_ap_er(dev[0], apdev[0], ssid)
logger.info("WPS provisioning step using connection handover")
if "FAIL" in dev[0].request("SET wps_corrupt_pkhash 1"):
raise Exception("Could not enable wps_corrupt_pkhash")
--
1.9.1
More information about the Hostap
mailing list