[PATCH 08/19] hostapd: Add own neighbor report data to neighbor report db
Ilan Peer
ilan.peer at intel.com
Tue Apr 5 06:08:01 PDT 2016
From: David Spinadel <david.spinadel at intel.com>
Add own neighbor report data to neighbor report DB based on
local LCI and location civic data.
Signed-off-by: David Spinadel <david.spinadel at intel.com>
---
src/ap/hostapd.c | 114 +++++++++++++++++++++++++++++++++++++++++++++++++++++++
1 file changed, 114 insertions(+)
diff --git a/src/ap/hostapd.c b/src/ap/hostapd.c
index 1ad7510..7e30fa9 100644
--- a/src/ap/hostapd.c
+++ b/src/ap/hostapd.c
@@ -1528,6 +1528,117 @@ void fst_hostapd_fill_iface_obj(struct hostapd_data *hapd,
#endif /* CONFIG_FST */
+static enum nr_chan_width hostapd_get_nr_chan_width(struct hostapd_data *hapd,
+ int ht, int vht)
+{
+ if (!ht && !vht)
+ return NR_CHAN_WIDTH_20;
+ if (!hapd->iconf->secondary_channel)
+ return NR_CHAN_WIDTH_20;
+ if (!vht || hapd->iconf->vht_oper_chwidth == VHT_CHANWIDTH_USE_HT)
+ return NR_CHAN_WIDTH_40;
+ if (hapd->iconf->vht_oper_chwidth == VHT_CHANWIDTH_80MHZ)
+ return NR_CHAN_WIDTH_80;
+ if (hapd->iconf->vht_oper_chwidth == VHT_CHANWIDTH_160MHZ)
+ return NR_CHAN_WIDTH_160;
+ if (hapd->iconf->vht_oper_chwidth == VHT_CHANWIDTH_80P80MHZ)
+ return NR_CHAN_WIDTH_80P80;
+ return NR_CHAN_WIDTH_20;
+}
+
+
+static void hostapd_set_own_neighbor_report(struct hostapd_data *hapd)
+{
+ u16 capab = hostapd_own_capab_info(hapd);
+ int ht = hapd->iconf->ieee80211n && !hapd->conf->disable_11n;
+ int vht = hapd->iconf->ieee80211ac && !hapd->conf->disable_11ac;
+ struct wpa_ssid_value ssid;
+ u8 channel, op_class;
+ int center_freq1 = 0, center_freq2 = 0;
+ enum nr_chan_width width;
+ u32 bssid_info;
+ struct wpabuf *nr;
+
+ if (!(hapd->conf->radio_measurements[0] &
+ WLAN_RRM_CAPS_NEIGHBOR_REPORT))
+ return;
+
+ bssid_info = 3; /* AP is reachable */
+ bssid_info |= NEI_REP_BSSID_INFO_SECURITY; /* "same as the AP" */
+ bssid_info |= NEI_REP_BSSID_INFO_KEY_SCOPE; /* "same as the AP" */
+
+ if (capab & WLAN_CAPABILITY_SPECTRUM_MGMT)
+ bssid_info |= NEI_REP_BSSID_INFO_SPECTRUM_MGMT;
+
+ bssid_info |= NEI_REP_BSSID_INFO_RM; /* RRM is supported */
+
+ if (hapd->conf->wmm_enabled) {
+ bssid_info |= NEI_REP_BSSID_INFO_QOS;
+
+ if (hapd->conf->wmm_uapsd &&
+ hapd->iface->drv_flags & WPA_DRIVER_FLAGS_AP_UAPSD)
+ bssid_info |= NEI_REP_BSSID_INFO_APSD;
+ }
+
+ if (ht) {
+ bssid_info |= (NEI_REP_BSSID_INFO_HT |
+ NEI_REP_BSSID_INFO_DELAYED_BA);
+
+ /* VHT bit added in IEEE 802.11 MC D4.3 */
+ if (vht)
+ bssid_info |= NEI_REP_BSSID_INFO_VHT;
+ }
+
+ /* TODO: set NEI_REP_BSSID_INFO_MOBILITY_DOMAIN if MDE is set */
+
+ ieee80211_freq_to_channel_ext(hapd->iface->freq,
+ hapd->iconf->secondary_channel,
+ hapd->iconf->vht_oper_chwidth,
+ &op_class, &channel);
+ width = hostapd_get_nr_chan_width(hapd, ht, vht);
+ if (vht) {
+ center_freq1 = ieee80211_chan_to_freq(NULL, op_class,
+ hapd->iconf->vht_oper_centr_freq_seg0_idx);
+ if (width == NR_CHAN_WIDTH_80P80)
+ center_freq2 = ieee80211_chan_to_freq(NULL, op_class,
+ hapd->iconf->vht_oper_centr_freq_seg1_idx);
+ } else if (ht) {
+ center_freq1 = hapd->iface->freq +
+ 10 * hapd->iconf->secondary_channel;
+ }
+
+ ssid.ssid_len = hapd->conf->ssid.ssid_len;
+ os_memcpy(ssid.ssid, hapd->conf->ssid.ssid, ssid.ssid_len);
+
+ /* Neighbor report IE size = BSSID + BSSID info + op_class + chan +
+ * phy type + wide bandwidth channel subelement
+ */
+ nr = wpabuf_alloc(ETH_ALEN + 4 + 1 + 1 + 1 + 5);
+ if (!nr)
+ return;
+
+ wpabuf_put_data(nr, hapd->own_addr, ETH_ALEN);
+ wpabuf_put_le32(nr, bssid_info);
+ wpabuf_put_u8(nr, op_class);
+ wpabuf_put_u8(nr, channel);
+ wpabuf_put_u8(nr, ieee80211_get_phy_type(hapd->iface->freq, ht, vht));
+
+ /* Channel width subelement may be needed to allow the receiving STA
+ * to send packets to the AP. It's an addition to IEEE802.11 MC D4.3
+ */
+ wpabuf_put_u8(nr, NEIGHBOR_REPORT_BANDWIDTH);
+ wpabuf_put_u8(nr, 3);
+ wpabuf_put_u8(nr, width);
+ wpabuf_put_u8(nr, center_freq1);
+ wpabuf_put_u8(nr, center_freq2);
+
+ hostapd_neighbor_set(hapd, hapd->own_addr, &ssid, nr, hapd->iconf->lci,
+ hapd->iconf->civic);
+
+ wpabuf_free(nr);
+}
+
+
static int hostapd_setup_interface_complete_sync(struct hostapd_iface *iface,
int err)
{
@@ -1713,6 +1824,9 @@ dfs_offload:
if (iface->interfaces && iface->interfaces->terminate_on_error > 0)
iface->interfaces->terminate_on_error--;
+ for (j = 0; j < iface->num_bss; j++)
+ hostapd_set_own_neighbor_report(iface->bss[j]);
+
return 0;
fail:
--
1.9.1
More information about the Hostap
mailing list