Non-DFS channel

[sunder]

The code has been already set to US.
 
The results remains same.
 
Best Regards,
Sunder


 
From: sunder_k at hotmail.com
To: j at w1.fi; hostap at lists.shmoo.com
Subject: RE: Non-DFS channel
Date: Wed, 7 Oct 2015 16:01:16 +0000




Thanks for quick response.
 
Linux 3.18 and ath10k are in use.  
 
No other configuration has been done at application application level.  With iw tool, the just the configuration gets verified. 
 
Is this driver constrained to work in this way ?  Is it possible to remove it, if it is constrained ?
 
Best Regards,


k.sunder
 
> Date: Wed, 7 Oct 2015 18:41:12 +0300
> From: j at w1.fi
> To: hostap at lists.shmoo.com
> Subject: Re: Non-DFS channel
> 
> On Wed, Oct 07, 2015 at 03:16:36PM +0000, sunder wrote:
> > The following channels shows no IR, as  a part of phy0 info in iw tool.
> > 
> > 
> >  * 5180 MHz [36] (30.0 dBm) (no IR)
> >   * 5200 MHz [40] (30.0 dBm) (no IR)
> >   * 5220 MHz [44] (30.0 dBm) (no IR)
> >   * 5240 MHz [48] (30.0 dBm) (no IR)
> >  
> > Is it possible to remove no IR without scanning ?
> 
> No, if the WLAN component/driver is provisioned with that type of
> constraint.
> 
> -- 
> Jouni Malinen                                            PGP id EFC895FA
> _______________________________________________
> HostAP mailing list
> HostAP at lists.shmoo.com
> http://lists.shmoo.com/mailman/listinfo/hostap
 		 	   		  

_______________________________________________
HostAP mailing list
HostAP at lists.shmoo.com
http://lists.shmoo.com/mailman/listinfo/hostap 		 	   		  
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.shmoo.com/pipermail/hostap/attachments/20151007/75f9f95e/attachment.htm>