Add Freq info in STATUS command in CLI

[Huang, ChengcaiX]

From: Huang, ChengcaiX
Sent: Tuesday, June 16, 2015 10:01 AM
To: 'hostap at lists.shmoo.com'
Subject: Add Freq info in STATUS command in CLI

Hi,

In order to help debuging, it is necessary to know on which frequency we are connected.
We need to know on which channel we are connected where DUT is STA, SoftAP, P2P Client and P2P Group Owner.

STATUS command available from wpa_cli already report several information but not the freq. It would be better to report it using this command.

Best Regards,
Cai
---------------------------------------------------------------------
Intel Corporation SAS (French simplified joint stock company)
Registered headquarters: "Les Montalets"- 2, rue de Paris, 
92196 Meudon Cedex, France
Registration Number:  302 456 199 R.C.S. NANTERRE
Capital: 4,572,000 Euros

This e-mail and any attachments may contain confidential material for
the sole use of the intended recipient(s). Any review or distribution
by others is strictly prohibited. If you are not the intended
recipient, please contact the sender and delete all copies.
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.shmoo.com/pipermail/hostap/attachments/20150616/c8b33467/attachment-0001.htm>
-------------- next part --------------
A non-text attachment was scrubbed...
Name: 0001-Add-Freq-info-in-STATUS-command-in-CLI.patch
Type: application/octet-stream
Size: 1560 bytes
Desc: 0001-Add-Freq-info-in-STATUS-command-in-CLI.patch
URL: <http://lists.shmoo.com/pipermail/hostap/attachments/20150616/c8b33467/attachment-0001.obj>