mix AP and wireless client

[Harm Verhagen]

On Wed, Jan 21, 2015 at 9:21 PM, Dan Williams <dcbw at redhat.com> wrote:

> On Wed, 2015-01-21 at 19:51 +0100, Harm Verhagen wrote:
> > On Wed, Jan 21, 2015 at 6:35 PM, Dan Williams <dcbw at redhat.com> wrote:
>
> > > I see you said GWF-3M05 which appears to be a ralink device.  Which
> > > kernel version and which ralink driver are you using?  Are you using
> > > rt2800usb or are you using a vendor driver?
> > >
> > >
> > kernel: 3.1.10
> > about driver, i'm not really sure. How can I tell ?
> > Let me check the kernel config tomorrow.
>
> dmesg output will usually tell you, eg 'dmesg | grep 2800'.  Or post
> your 'lsmod' output and we can figure it out too.
>
> Dan
>
>
Right, so yes I'm using rt2800usb, and yes seems a Ralink device.

$ lsmod -> no modules, all built-in

$dmesg | grep 2800
[    4.160068] usbcore: registered new interface driver rt2800usb
[    9.676979] Registered led device: rt2800usb-phy0::radio
[    9.677263] Registered led device: rt2800usb-phy0::assoc
[    9.677539] Registered led device: rt2800usb-phy0::quality

$ dmesg | grep phy0
[    9.673829] ieee80211 phy0: Selected rate control algorithm 'minstrel_ht'
[    9.676979] Registered led device: rt2800usb-phy0::radio
[    9.677263] Registered led device: rt2800usb-phy0::assoc
[    9.677539] Registered led device: rt2800usb-phy0::quality

$ dmesg| grep 3-1.4
[    9.085779] usb 3-1.4: new high speed USB device number 4 using
tegra-ehci
[    9.243734] usb 3-1.4: New USB device found, idVendor=148f,
idProduct=3070
[    9.258476] usb 3-1.4: New USB device strings: Mfr=1, Product=2,
SerialNumber=3
[    9.280257] usb 3-1.4: Product: 802.11 n WLAN
[    9.291809] usb 3-1.4: Manufacturer: Ralink
[    9.303156] usb 3-1.4: SerialNumber: 1.0
[    9.406341] usb 3-1.4: reset high speed USB device number 4 using
tegra-ehci

Regards,
Harm
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.shmoo.com/pipermail/hostap/attachments/20150122/a23132a1/attachment.htm>