[PATCH] mesh: Make inactivity timer configurable
Masashi Honma
masashi.honma
Wed Jan 14 16:22:31 PST 2015
Current mesh code uses ap_max_inactivity as inactivity timer. This patch makes
it configurable.
There is another mesh inactivity timer in mac80211. The timer works even if
user_mpm=1. So this patch sets the max value to the timer for workaround. This
looks bug in mac80211. I will fix the mac80211. But this patch will be needed
for backward compatibility.
Signed-off-by: Masashi Honma <masashi.honma at gmail.com>
---
src/drivers/driver.h | 1 +
src/drivers/driver_nl80211.c | 14 ++++++++++++++
wpa_supplicant/config.c | 2 ++
wpa_supplicant/config.h | 9 +++++++++
wpa_supplicant/config_file.c | 4 ++++
wpa_supplicant/mesh.c | 5 +++++
wpa_supplicant/wpa_supplicant.conf | 5 +++++
7 files changed, 40 insertions(+)
diff --git a/src/drivers/driver.h b/src/drivers/driver.h
index 2c0c685..b8a7c51 100644
--- a/src/drivers/driver.h
+++ b/src/drivers/driver.h
@@ -1040,6 +1040,7 @@ struct wpa_driver_mesh_bss_params {
* See NL80211_MESHCONF_* for all the mesh config parameters.
*/
unsigned int flags;
+ int peer_link_timeout;
};
struct wpa_driver_mesh_join_params {
diff --git a/src/drivers/driver_nl80211.c b/src/drivers/driver_nl80211.c
index c180f15..2929b47 100644
--- a/src/drivers/driver_nl80211.c
+++ b/src/drivers/driver_nl80211.c
@@ -7866,6 +7866,20 @@ wpa_driver_nl80211_join_mesh(void *priv,
nla_put_u16(msg, NL80211_MESHCONF_MAX_PEER_LINKS,
params->max_peer_links))
goto fail;
+ /**
+ * Set NL80211_MESHCONF_PLINK_TIMEOUT even if user mpm is used.
+ * Because the timer could disconnect stations even if user mpm is used.
+ *
+ * Set 0xffffffff instead of 0. Because NL80211_MESHCONF_PLINK_TIMEOUT
+ * does not allow 0.
+ */
+ if (nla_put_u32(msg, NL80211_MESHCONF_PLINK_TIMEOUT,
+ ((params->conf.flags & WPA_DRIVER_MESH_FLAG_USER_MPM) ||
+ params->conf.peer_link_timeout < 1) ? 0xffffffff :
+ params->conf.peer_link_timeout)) {
+ wpa_printf(MSG_ERROR, "nl80211: Failed to set PLINK_TIMEOUT");
+ goto fail;
+ }
nla_nest_end(msg, container);
ret = send_and_recv_msgs(drv, msg, NULL, NULL);
diff --git a/wpa_supplicant/config.c b/wpa_supplicant/config.c
index a810632..2998c4e 100644
--- a/wpa_supplicant/config.c
+++ b/wpa_supplicant/config.c
@@ -3472,6 +3472,7 @@ struct wpa_config * wpa_config_alloc_empty(const char *ctrl_interface,
config->ap_scan = DEFAULT_AP_SCAN;
config->user_mpm = DEFAULT_USER_MPM;
config->max_peer_links = DEFAULT_MAX_PEER_LINKS;
+ config->mesh_max_inactivity = DEFAULT_MESH_MAX_INACTIVITY;
config->fast_reauth = DEFAULT_FAST_REAUTH;
config->p2p_go_intent = DEFAULT_P2P_GO_INTENT;
config->p2p_intra_bss = DEFAULT_P2P_INTRA_BSS;
@@ -4021,6 +4022,7 @@ static const struct global_parse_data global_fields[] = {
#ifdef CONFIG_MESH
{ INT(user_mpm), 0 },
{ INT_RANGE(max_peer_links, 0, 255), 0 },
+ { INT(mesh_max_inactivity), 0 },
#endif /* CONFIG_MESH */
{ INT(disable_scan_offload), 0 },
{ INT(fast_reauth), 0 },
diff --git a/wpa_supplicant/config.h b/wpa_supplicant/config.h
index dca17c2..e508573 100644
--- a/wpa_supplicant/config.h
+++ b/wpa_supplicant/config.h
@@ -17,6 +17,7 @@
#endif /* CONFIG_NO_SCAN_PROCESSING */
#define DEFAULT_USER_MPM 1
#define DEFAULT_MAX_PEER_LINKS 99
+#define DEFAULT_MESH_MAX_INACTIVITY 300
#define DEFAULT_FAST_REAUTH 1
#define DEFAULT_P2P_GO_INTENT 7
#define DEFAULT_P2P_INTRA_BSS 1
@@ -1119,6 +1120,14 @@ struct wpa_config {
* Maximum number of mesh peering currently maintained by the STA.
*/
int max_peer_links;
+
+ /**
+ * mesh_max_inactivity - Timeout in seconds to detect STA inactivity
+ *
+ * This timeout value is used in mesh STA to clean up inactive stations.
+ * By default: 300 seconds.
+ */
+ int mesh_max_inactivity;
};
diff --git a/wpa_supplicant/config_file.c b/wpa_supplicant/config_file.c
index d8cbe8b..b97ba3a 100644
--- a/wpa_supplicant/config_file.c
+++ b/wpa_supplicant/config_file.c
@@ -1218,6 +1218,10 @@ static void wpa_config_write_global(FILE *f, struct wpa_config *config)
if (config->max_peer_links != DEFAULT_MAX_PEER_LINKS)
fprintf(f, "max_peer_links=%d\n", config->max_peer_links);
+
+ if (config->mesh_max_inactivity != DEFAULT_MESH_MAX_INACTIVITY)
+ fprintf(f, "mesh_max_inactivity=%d\n",
+ config->mesh_max_inactivity);
}
#endif /* CONFIG_NO_CONFIG_WRITE */
diff --git a/wpa_supplicant/mesh.c b/wpa_supplicant/mesh.c
index 5fdf4e0..131924d 100644
--- a/wpa_supplicant/mesh.c
+++ b/wpa_supplicant/mesh.c
@@ -170,6 +170,8 @@ static int wpa_supplicant_mesh_init(struct wpa_supplicant *wpa_s,
ifmsh->conf = conf;
ifmsh->bss[0]->max_plinks = wpa_s->conf->max_peer_links;
+ ifmsh->bss[0]->conf->ap_max_inactivity =
+ wpa_s->conf->mesh_max_inactivity;
os_strlcpy(bss->conf->iface, wpa_s->ifname, sizeof(bss->conf->iface));
mconf = mesh_config_create(ssid);
@@ -352,6 +354,9 @@ int wpa_supplicant_join_mesh(struct wpa_supplicant *wpa_s,
params.basic_rates = wpa_s->ifmsh->basic_rates;
}
+ params.conf.peer_link_timeout =
+ wpa_s->ifmsh->bss[0]->conf->ap_max_inactivity;
+
wpa_msg(wpa_s, MSG_INFO, "joining mesh %s",
wpa_ssid_txt(ssid->ssid, ssid->ssid_len));
ret = wpa_drv_join_mesh(wpa_s, ¶ms);
diff --git a/wpa_supplicant/wpa_supplicant.conf b/wpa_supplicant/wpa_supplicant.conf
index 7d189c7..61acd73 100644
--- a/wpa_supplicant/wpa_supplicant.conf
+++ b/wpa_supplicant/wpa_supplicant.conf
@@ -127,6 +127,11 @@ ap_scan=1
# Maximum number of mesh peering currently maintained by the STA.
#max_peer_links=99
+# Timeout in seconds to detect STA inactivity (default: 300 seconds)
+#
+# This timeout value is used in mesh STA to clean up inactive stations.
+#mesh_max_inactivity=300
+
# EAP fast re-authentication
# By default, fast re-authentication is enabled for all EAP methods that
# support it. This variable can be used to disable fast re-authentication.
--
1.9.1
More information about the Hostap
mailing list