[PATCHv2 09/12] test: verify connectivity with untagged/tagged mixed configuration

[Jouni Malinen]

On Sun, Dec 06, 2015 at 09:47:40PM +0100, Michael Braun wrote:
> diff --git a/tests/hwsim/test_ap_vlan.py b/tests/hwsim/test_ap_vlan.py
> +def test_ap_vlan_wpa2_radius_mixed(dev, apdev):
> +    """AP VLAN with WPA2-Enterprise and tagged+untagged VLANs"""
> +    try:
> +        subprocess.call(['ip','link','add','link','wlan0','name','wlan0.1','type','vlan','id','1'])
> +        subprocess.call(['ifconfig','wlan0.1','up'])
> +
> +        params = hostapd.wpa2_eap_params(ssid="test-vlan")
> +        params['dynamic_vlan'] = "1"
> +        params["vlan_naming"] = "1"
> +        hapd = hostapd.add_ap(apdev[0]['ifname'], params)
> +
> +        dev[0].connect("test-vlan", key_mgmt="WPA-EAP", eap="PAX",
> +                       identity="vlan12mixed",
> +                       password_hex="0123456789abcdef0123456789abcdef",
> +                       scan_freq="2412")
> +
> +	logger.info("test connectivity in untagged vlan 2")
> +        hwsim_utils.run_connectivity_test(dev[0], hapd, 0, ifname1="wlan0", ifname2="brvlan2")
> +	logger.info("test connectivity in tagged vlan 1")
> +        hwsim_utils.run_connectivity_test(dev[0], hapd, 0, ifname1="wlan0.1", ifname2="brvlan1")

As noted in the previous email, this fails for me.. That needs to be
addressed before this test case can be added (and well, if there is
something wrong in functionality, that functionality in the
implementation would obviously need to be addressed as well).
 
-- 
Jouni Malinen                                            PGP id EFC895FA