Problem with disconnect and reconnect

[Marlon Smith]

I've tried calling disconnect() before removing the network, but I get
the same result.  Calling disconnect() puts the state into
interface_disabled, and I have to restart wpa_supplicant in order to
recover.

On Mon, 2015-04-27 at 21:58 +0200, Floris Bos wrote:
> On 04/27/2015 09:44 PM, Marlon Smith wrote:
> 
> > 
> > I'm using wpa_supplicant with nl80211 and the rt2800usb driver in my
> > application, which allows user to connect to a network or create an
> > access point.  I'm using the dbus interface of wpa_supplicant to
> > control the connection.
> > 
> > The user is able to enable/disable the connection via a menu, and
> > when they do I use AddNetwork and SelectNetwork to connect, and
> > RemoveNetwork to disconnect.
> 
> 
> Might want to use Disconnect() to disconnect.
> 
> 
> Yours sincerely,
> 
> Floris Bos
> 
> 
> _______________________________________________
> HostAP mailing list
> HostAP at lists.shmoo.com
> http://lists.shmoo.com/mailman/listinfo/hostap


-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.shmoo.com/pipermail/hostap/attachments/20150427/7b0aeba3/attachment.htm>