[WNM-Notification] When and where hostapd sends Remediation Request to the device
Fri Sep 26 12:24:31 PDT 2014
Hi Jouni, thank you so much for the reply.
I have tried to put some traces in the code to detect if it is executing
that function and I have no results. Basing on HS 2.0 R2 specification the
WNM-Notification should be sent after the AP receive an Access-Accept
message from AAA server with the RADIUS attribute
"HS2.0-Subscription-Remediation" (vendor specific attribute from the WFA).
Because of that I have been finding the trigger that makes that function
run, because I was not able to see the function execution after the 4 way
handshake (with the corresponding HS 2.0 parameter in the Access-Accept).
I will check again the execution flow to try to fix this issue.
Thank you again for the support Jouni.
On Fri, Sep 26, 2014 at 7:56 PM, Jouni Malinen <j at w1.fi> wrote:
> On Fri, Sep 26, 2014 at 04:49:59PM +0200, Adrian Moran wrote:
> > I have been trying to understand how hostapd sends a WNM-Notification
> > (concretly a Remediation Request) to the mobile device but I'm now
> > I have seen in the file src/ap/ieee802_1x.c that the function
> > ieee802_1x_finished is the attendant of send the remediation request
> > the function hs20_send_wnm_notification) but I can see where and when
> > function is called.
> ieee802_1x_finished() is called from the EAPOL authenticator finished
> callback, i.e., when the 4-way handshake following the EAP
> authentication has been completed in the case of WPA2-Enterprise (which
> would be the case for this remediation request).
> Jouni Malinen PGP id EFC895FA
> HostAP mailing list
> HostAP at lists.shmoo.com
Adri?n Mor?n Montes
*Research & Development EngineerFon Labs Workgroup, Getxo - Spain.*
-------------- next part --------------
An HTML attachment was scrubbed...
More information about the Hostap