performance optimization for 802.11n at 2.4GHZ

[Sourav]

Hi All,
We are using hostapd + mac80211 + cfg80211 + compat + opensource 
drivers(rt2x00usb.ko,rt2x00lib.ko,rt2800usb.ko,rt2800lib.ko) + device 
firmware(rt2800.bin) in 802.11n mode in 2.4GHZ. The data speeds which we 
see are ~20Mbps which is way low than the ideal 300Mbps for 802.11n. 
Even if channel bonding is not achieved(which I guess can't be 
controlled via config), we expect to be able to tune the performance to 
reach ~100Mbps...please let me know how to tune the setup for achieving 
higher throughput.

-- 
Warm Regards,
Sourav


______________________________________________________________________
This communication contains information which may be confidential or privileged. The information is intended solely for the use of the individual or entity named above.  If you are not the intended recipient, be aware that any disclosure, copying, distribution or use of the contents of this information is prohibited.  If you have received this communication in error, please notify me by telephone immediately.
______________________________________________________________________