Roaming between 2 APs with WDS

[Dan Williams]

On Thu, 2014-10-16 at 12:44 +0200, V?ctor Andr?s wrote:
> Dear Dan,
> Thanks for the reply.
> 
> I?m actually don?t know what scanning mode am I using. How can I check 
> if it?s passive or active?

How are you triggering the scan?

Dan

> Thanks in advance.
> 
> V?ctor
> 
> El 14/10/2014 17:58, Dan Williams escribi?:
> >
> >> I need to transmit data at 1000 Hz, so with this time searching, I have
> >> small breaks in the flow data. The data aren't lost, but in the flow
> >> data you can see that small stops.
> >> Any other alternative? I think less than 100 ms of searching and
> >> transmitting is not possible, isn't it?
> > No, it certainly is possible with active scanning.  Can you confirm that
> > active scanning is not being used, and if so, try to enable that?
> >
> > Dan
> >