kernel 3.15 and hostap under a bridge
Shvedov Yury
yshvedov
Sun Oct 12 05:17:57 PDT 2014
Hi Tomas.
I had the simmilar problem on Tp-link WR1043ND v2 with OpenWRT (can't
now remember the kernel version). I found out, that traffic appears
after some time or after I reattach the carrier (patch-cord). Using
tcpdump I could see outgoing client's traffic on wireless interface and
bridge interface, but not on the physical interface. I didn't find the
solution yet but you can try may action to find out if your problem is
the same to join with me to find the solution.
On 10/12/2014 03:46 PM, Tomas M wrote:
> Sorry, i fell compelled to ask once more.
>
> Im sure this is some stupid new setting on the kernel, but i fail to
> find out how to even debug this problem.
>
> any thread to pull from?
>
> Thanks!
>
> On Mon, Sep 29, 2014 at 11:36 AM, Tomas M <tmezzadra at gmail.com
> <mailto:tmezzadra at gmail.com>> wrote:
>
> this is not a Red hot chili pepers song! ;)
>
> I have configured hostAP under archlinux. and it is working
> correctly under bridged mode.
>
> but since the upgrade to linux 3.15. i cannot transmit data
> through the hostap clients.
>
> they can ping the server's IP. but not the default gateway.
>
> my network is 192.168.11.0/24 <http://192.168.11.0/24>
> hostap AP is at 192.168.11.10
> the default gateway is 192.168.11.1
> a client is 192.168.11.11
>
> 11.11 can ping 11.10
> 11.11 cannot ping 11.1
>
> only software change is from kernel 3.14 to 3.15 (and 3.16 also).
>
> I have been searching on what changes to the kernel might affect
> hostpad behaviour without luck!
>
> Wireless hardware is ath9k
>
> thanks!
>
> Tomas M.
>
>
>
>
> _______________________________________________
> HostAP mailing list
> HostAP at lists.shmoo.com
> http://lists.shmoo.com/mailman/listinfo/hostap
--
Kind regards
Yury Shvedov
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.shmoo.com/pipermail/hostap/attachments/20141012/b6ba31b5/attachment.htm>
More information about the Hostap
mailing list