[PATCH 02/12] nl80211: Populate RRM flags in nl80211 driver

[Ilan Peer]

From: Assaf Krauss <assaf.krauss at intel.com>

Set the RRM capability flags, based on the capabilities reported
by the underlying driver.

In addition, upon connection, notify the underlying driver regarding
RRM support.

Signed-off-by: Assaf Krauss <assaf.krauss at intel.com>
---
 src/drivers/driver_nl80211.c      |  9 +++++++++
 src/drivers/driver_nl80211_capa.c | 12 ++++++++++++
 2 files changed, 21 insertions(+)

diff --git a/src/drivers/driver_nl80211.c b/src/drivers/driver_nl80211.c
index 68afcf0..5808aba 100644
--- a/src/drivers/driver_nl80211.c
+++ b/src/drivers/driver_nl80211.c
@@ -5276,6 +5276,15 @@ static int nl80211_connect_common(struct wpa_driver_nl80211_data *drv,
 	if (params->mgmt_frame_protection == MGMT_FRAME_PROTECTION_REQUIRED)
 		NLA_PUT_U32(msg, NL80211_ATTR_USE_MFP, NL80211_MFP_REQUIRED);
 
+	if (params->rrm_used) {
+		u32 drv_rrm_flags = drv->capa.rrm_flags;
+		if (!(drv_rrm_flags &
+		      WPA_DRIVER_FLAGS_DS_PARAM_SET_IE_IN_PROBES) ||
+		    !(drv_rrm_flags & WPA_DRIVER_FLAGS_QUIET))
+			goto nla_put_failure;
+		NLA_PUT_FLAG(msg, NL80211_ATTR_USE_RRM);
+	}
+
 	if (params->disable_ht)
 		NLA_PUT_FLAG(msg, NL80211_ATTR_DISABLE_HT);
 
diff --git a/src/drivers/driver_nl80211_capa.c b/src/drivers/driver_nl80211_capa.c
index cb9d383..f52f5bb 100644
--- a/src/drivers/driver_nl80211_capa.c
+++ b/src/drivers/driver_nl80211_capa.c
@@ -364,6 +364,18 @@ static void wiphy_info_feature_flags(struct wiphy_info_data *info,
 
 	if (flags & NL80211_FEATURE_DYNAMIC_SMPS)
 		capa->smps_modes |= WPA_DRIVER_SMPS_MODE_DYNAMIC;
+
+	if (flags & NL80211_FEATURE_DS_PARAM_SET_IE_IN_PROBES)
+		capa->rrm_flags |= WPA_DRIVER_FLAGS_DS_PARAM_SET_IE_IN_PROBES;
+
+	if (flags & NL80211_FEATURE_WFA_TPC_IE_IN_PROBES)
+		capa->rrm_flags |= WPA_DRIVER_FLAGS_WFA_TPC_IE_IN_PROBES;
+
+	if (flags & NL80211_FEATURE_QUIET)
+		capa->rrm_flags |= WPA_DRIVER_FLAGS_QUIET;
+
+	if (flags & NL80211_FEATURE_TX_POWER_INSERTION)
+		capa->rrm_flags |= WPA_DRIVER_FLAGS_TX_POWER_INSERTION;
 }
 
 
-- 
1.8.3.2