[PATCH 1/1] P2P: Avoid resetting pending_listen_freq if p2p_listen is pending

Jithu Jance jithu
Wed May 21 23:55:53 PDT 2014



> > + p2p->pending_listen_freq = freq;
> > + p2p->pending_listen_sec = timeout / 1000;
> > + p2p->pending_listen_usec = (timeout % 1000) * 1000;
>
> It's not shown in the context here, but this moving of
> p2p->pending_listen_{sec,usec} would lose information from the
> p2p->p2p_scan_running case. That uses p2p->start_after_scan to
> postpone
> start of the listen operation and p2p_run_after_scan() expects
> p2p->pending_listen_{sec,usec} to be set fror the
> P2P_AFTER_SCAN_LISTEN
> case.
>

I re-organised the code to take care of this case. Hope this is
fine now.


If p2p_listen is called while previous listen command's
remain_on_channel event is pending, the p2p_listen would fail
and it used to clear pending_listen_freq. Now when the remain-
on-channel event comes from the driver, the pending_listen_freq
doesn't match and gets ignored. This was leading to a case
where listen state was getting stuck (in case of WAIT_PEER_CONNECT
state).

Signed-off-by: Jithu Jance <jithu at broadcom.com>
---
 src/p2p/p2p.c |   29 +++++++++++++++++++++--------
 1 file changed, 21 insertions(+), 8 deletions(-)

diff --git a/src/p2p/p2p.c b/src/p2p/p2p.c
index c2f8d9b..08aecc1 100644
--- a/src/p2p/p2p.c
+++ b/src/p2p/p2p.c
@@ -238,6 +238,12 @@ static void p2p_listen_in_find(struct p2p_data *p2p, int dev_disc)
 	p2p_dbg(p2p, "Starting short listen state (state=%s)",
 		p2p_state_txt(p2p->state));

+	if (p2p->pending_listen_freq) {
+		/* We have a pending p2p_listen request */
+		p2p_dbg(p2p, "p2p_listen command pending already");
+		return;
+	}
+
 	freq = p2p_channel_to_freq(p2p->cfg->reg_class, p2p->cfg->channel);
 	if (freq < 0) {
 		p2p_dbg(p2p, "Unknown regulatory class/channel");
@@ -260,14 +266,14 @@ static void p2p_listen_in_find(struct p2p_data *p2p, int dev_disc)
 		return;
 	}

-	p2p->pending_listen_freq = freq;
-	p2p->pending_listen_sec = 0;
-	p2p->pending_listen_usec = 1024 * tu;
-
 	ies = p2p_build_probe_resp_ies(p2p);
 	if (ies == NULL)
 		return;

+	p2p->pending_listen_freq = freq;
+	p2p->pending_listen_sec = 0;
+	p2p->pending_listen_usec = 1024 * tu;
+
 	if (p2p->cfg->start_listen(p2p->cfg->cb_ctx, freq, 1024 * tu / 1000,
 		    ies) < 0) {
 		p2p_dbg(p2p, "Failed to start listen mode");
@@ -284,16 +290,21 @@ int p2p_listen(struct p2p_data *p2p, unsigned int timeout)

 	p2p_dbg(p2p, "Going to listen(only) state");

+	p2p->pending_listen_sec = timeout / 1000;
+	p2p->pending_listen_usec = (timeout % 1000) * 1000;
+
+	if (p2p->pending_listen_freq) {
+		/* We have a pending p2p_listen request */
+		p2p_dbg(p2p, "p2p_listen command pending already");
+		return -1;
+	}
+
 	freq = p2p_channel_to_freq(p2p->cfg->reg_class, p2p->cfg->channel);
 	if (freq < 0) {
 		p2p_dbg(p2p, "Unknown regulatory class/channel");
 		return -1;
 	}

-	p2p->pending_listen_freq = freq;
-	p2p->pending_listen_sec = timeout / 1000;
-	p2p->pending_listen_usec = (timeout % 1000) * 1000;
-
 	if (p2p->p2p_scan_running) {
 		if (p2p->start_after_scan == P2P_AFTER_SCAN_CONNECT) {
 			p2p_dbg(p2p, "p2p_scan running - connect is already pending - skip listen");
@@ -308,6 +319,8 @@ int p2p_listen(struct p2p_data *p2p, unsigned int timeout)
 	if (ies == NULL)
 		return -1;

+	p2p->pending_listen_freq = freq;
+
 	if (p2p->cfg->start_listen(p2p->cfg->cb_ctx, freq, timeout, ies) < 0) {
 		p2p_dbg(p2p, "Failed to start listen mode");
 		p2p->pending_listen_freq = 0;
--
1.7.9.5




- Jithu Jance



More information about the Hostap mailing list