[PATCH 1/4] wpa_supplicant: Update channel switch driver interface
Ilan Peer
ilan.peer
Thu Nov 14 02:28:29 PST 2013
From: Andrei Otcheretianski <andrei.otcheretianski at intel.com>
Add csa_settings struct which holds parameters for CSA.
Change driver inteface for switch_channel, so it will receive
this struct and not only frequency as it was before.
This allows wpa_supplicant to provide all the required
parameters (beacons, proberesp, assocresp, CSA IE) which
are required by cfg80211 implementation
Signed-hostap: Andrei Otcheretianski <andrei.otcheretianski at intel.com>
---
src/drivers/driver.h | 57 +++++++++++++++++++++++++++++++++++++++++++--
wpa_supplicant/driver_i.h | 4 ++--
2 files changed, 57 insertions(+), 4 deletions(-)
diff --git a/src/drivers/driver.h b/src/drivers/driver.h
index f233032..c9a0a3a 100644
--- a/src/drivers/driver.h
+++ b/src/drivers/driver.h
@@ -1157,6 +1157,59 @@ struct wpa_signal_info {
};
/**
+ * struct beacon_data - beacon data
+ * @head: head portion of beacon (before TIM IE)
+ * @tail: tail portion of beacon (after TIM IE)
+ * @beacon_ies: extra information element(s) to add into Beacon frames or %NULL
+ * @proberesp_ies: extra information element(s) to add into Probe Response
+ * frames or %NULL
+ * @assocresp_ies: extra information element(s) to add into (Re)Association
+ * Response frames or %NULL
+ * @probe_resp: probe response template
+ * @head_len: length of @head
+ * @tail_len: length of @tail
+ * @beacon_ies_len: length of beacon_ies in octets
+ * @proberesp_ies_len: length of proberesp_ies in octets
+ * @proberesp_ies_len: length of proberesp_ies in octets
+ * @probe_resp_len: length of probe response template (@probe_resp)
+ */
+struct beacon_data {
+ u8 *head, *tail;
+ u8 *beacon_ies;
+ u8 *proberesp_ies;
+ u8 *assocresp_ies;
+ u8 *probe_resp;
+
+ size_t head_len, tail_len;
+ size_t beacon_ies_len;
+ size_t proberesp_ies_len;
+ size_t assocresp_ies_len;
+ size_t probe_resp_len;
+};
+
+/**
+ * struct csa_settings - settings for channel switch command
+ * @cs_count: count in beacons to perform the switch
+ * @block_tx: 1 - block transmission for CSA period
+ * @freq_params: next channel frequency parameter
+ * @beacon_csa: beacon/probe resp/asooc resp info for CSA period
+ * @beacon_after: next beacon/probe resp/asooc resp info
+ * @counter_offset_beacon: offset to the count field in beacon's tail
+ * @counter_offset_presp: offset to the count field in probe resp.
+ */
+struct csa_settings {
+ u8 cs_count;
+ u8 block_tx;
+
+ struct hostapd_freq_params freq_params;
+ struct beacon_data beacon_csa;
+ struct beacon_data beacon_after;
+
+ u16 counter_offset_beacon;
+ u16 counter_offset_presp;
+};
+
+/**
* struct wpa_driver_ops - Driver interface API definition
*
* This structure defines the API that each driver interface needs to implement
@@ -2747,13 +2800,13 @@ struct wpa_driver_ops {
* switch_channel - Announce channel switch and migrate the GO to the
* given frequency
* @priv: Private driver interface data
- * @freq: Frequency in MHz
+ * @settings: Settings for CSA period and new channel
* Returns: 0 on success, -1 on failure
*
* This function is used to move the GO to the legacy STA channel to
* avoid frequency conflict in single channel concurrency.
*/
- int (*switch_channel)(void *priv, unsigned int freq);
+ int (*switch_channel)(void *priv, struct csa_settings *settings);
/**
* start_dfs_cac - Listen for radar interference on the channel
diff --git a/wpa_supplicant/driver_i.h b/wpa_supplicant/driver_i.h
index 6b5d49a..56d6529 100644
--- a/wpa_supplicant/driver_i.h
+++ b/wpa_supplicant/driver_i.h
@@ -683,11 +683,11 @@ static inline int wpa_drv_radio_disable(struct wpa_supplicant *wpa_s,
}
static inline int wpa_drv_switch_channel(struct wpa_supplicant *wpa_s,
- unsigned int freq)
+ struct csa_settings *settings)
{
if (!wpa_s->driver->switch_channel)
return -1;
- return wpa_s->driver->switch_channel(wpa_s->drv_priv, freq);
+ return wpa_s->driver->switch_channel(wpa_s->drv_priv, settings);
}
static inline int wpa_drv_wnm_oper(struct wpa_supplicant *wpa_s,
--
1.7.10.4
More information about the Hostap
mailing list